1998-2002 Ford Crown Victoria Rear Springs and Shocks Replacement
Автокөліктер мен көлік құралдары
Maybe your springs are starting to sag or you want to replace the factory air ride suspension with regular springs? Fortunately its an easy upgrade. Any late model Crown Victoria spring is a direct replacement. I chose to use brand new police interceptor springs to firm up the rear end of my Crown Vic and also replaced the shocks why I was at it due to a blown drivers side shock. The shocks on the 92-02 cars are much harder to replace than the springs, but I will show you a tip on how to get the old ones off. With a little patience you can easily complete this project yourself and save a bunch of money.
Пікірлер: 84
Can confirm. I've just completed this upgrade on my 95 crown Vic. It works great! Light trailer towing, heavy groceries or extra passengers are no longer a problem. Thanks for the recommendation! Great vid!
Looks like a challenge when you do it on the ground. Those shocks looked hard. Your video is great. Thanks for showing us.
@JackofAllMasterofNone
Жыл бұрын
It was a pain for sure.
@carle5538
Жыл бұрын
@@JackofAllMasterofNone Question - Would installing springs from an F150 pick up raise the car higher? Thanks again
Nice video and thanks for the shock removal tip never thought of that thanks again.
Thanks for making this video, I'm going to be doing exactly this on my wife's crown vic today
Thanks, I plan to change my shocks on my 2001 Grand marque. Might do the springs too!
I cut an access hole in the trunk for each shock then covered them up with metal tape.
@JackofAllMasterofNone
3 жыл бұрын
I thought about it but wasn't sure exactly where to cut and didn't want to destroy stuff.
Hey I know its been a couple years but I was wondering couldn't you just stick a wrench on the top nut and then spin the upper casing of the shock from below maybe even by hand? I mean the stud is attached to that top outer shell portion of the shock right? I know you couldn't spin the shock from the bottom but isn't the whole top half one piece?
Tape the insulators on. I air Bag my 2000 GM as the sway bar rubbed on the Explorer IRS cover drain bolt when fully loaded. Soft or firm ride with air adjustment.
The heavy duty coil springs have been discontinued where can i find a direct replacement?
I’m going to do watts link have you a video on that ?
Thanks for this video. I'm interested in knowing more about that new dual exhaust. Did that car have factory duals or did you upgrade from single?
@JackofAllMasterofNone
2 жыл бұрын
Upgraded from single to dual using Walker components.
Very helpful thank you
Would it be worth doing the fronts as well?
Those will fit my 05 Grand marquis too right?
How many tons are your jack stands rated for?
I assume i can do this to my 2005 vic? I do a lot of city driving and recently it's become super bouncy I mean like wtf stop. Think my shocks may have broken off lol I get like a 6 time bounce when on the highway it is annoying
I have a 2000 Lincoln Town car, with the springs in the rear brginning to sag. Do you have any idea if the springs from the 2003 Crown Victoria Police Interceptor would be compatible with my vehicle? I am hoping that they may be compatible, because I was planning to have the coils replaced soon, and this would be a nice upgrade.
@JackofAllMasterofNone
Жыл бұрын
Yes, they will work!
Will this work on the 2000 Grand Marquis? Any.upgrades to the front? Thank you for the vid.
@JackofAllMasterofNone
2 жыл бұрын
Yes it's the same thing on the Grand Marquis. I didn't do any front upgrades
hi thank sfor the video. do you know if the parts you used are the same for a 2008 mercury grand marquis? thank you!
@JackofAllMasterofNone
2 жыл бұрын
The springs are but the shocks are not. In 2006, they completely redesigned the suspension front and rear. Outboard shocks and a much better ride.
@GenerationOldschoolEspañol
2 жыл бұрын
@@JackofAllMasterofNone thank you! I need to replace the shocks on all four corners
i just put air shocks on my p73 fixed the problem
@Clamjammer
3 жыл бұрын
Hey what parts did you use? I want to do the same thing to my grand marquis
I welded the wrench under a bar with a ratchet wrenches I sacrifice one of my ratchet wrenches I kind of cried but it made a good tool to get that shock nut off the top of that mercury
How long did it take you to do the rear springs on the crown vic
@JackofAllMasterofNone
3 жыл бұрын
20 minutes
My 2001 civilian model I changed my rear springs and shocks to police interceptor parts
@thesaudischolar274
3 жыл бұрын
Does it look higher now??
@jontaylove25
3 жыл бұрын
@@thesaudischolar274 not to me
@thesaudischolar274
3 жыл бұрын
@@jontaylove25 can i see your car ? I have got 2005 and it was for commercial (P72) and i dont know what the springs are but i dont think it looks higher than the other police crown vic ( im talking about the rear springs)
How much does this change the ride quality? Would it be noticeable on a 2003 with 254k miles on it?
@JackofAllMasterofNone
11 ай бұрын
Stiffens it up nicely in a good way
8:33 that's what she said
@65csx83
2 жыл бұрын
Shame on you.
@SilverBullet93GT
2 жыл бұрын
he said ir not meee:)
Those models were an absolute pita because of the top shock nut location. The later models were finally relocated for easier access thankfully.
@JackofAllMasterofNone
Жыл бұрын
Yeah. It wasn't an easy job.
Could I use the same setup with 06 grand Marquis
@JackofAllMasterofNone
3 жыл бұрын
Yes
Where did you get that shiny new exhaust?
@JackofAllMasterofNone
Жыл бұрын
It was just a Walker parts store system
Can I replace the airbags with coil springs easily?
@JackofAllMasterofNone
Жыл бұрын
Yes. Just remove airbags and put coil springs in there place. Everything else is the same.
Does this work for the grand marquis as well?
@JackofAllMasterofNone
Жыл бұрын
Yes
isn't there a top and bottom coil spring isolator ?
@Reallionaire314
Жыл бұрын
It's suppose to be, lol. He left his out
@fosholyfe6115
Жыл бұрын
My 2003 doesn't have any... But I'm putting some when I do the aprings
@mayken6661
5 ай бұрын
Yes, I wondered that
Where could I purchase this specific pair of springs online?
@JackofAllMasterofNone
3 жыл бұрын
eBay is a good place. Or any online Ford dealer.
@robertvilliard6768
3 жыл бұрын
I found some on rock auto, Swedish steel cargo springs $63!
@robertvilliard6768
3 жыл бұрын
Make sure you get progressive winding
@robertvilliard6768
3 жыл бұрын
They are way more responsive than air, did my shocks and struts too
@Rylee_G
3 жыл бұрын
@@robertvilliard6768 is progressive better than variable?
Do you need the rubber isolator on the springs?
@JackofAllMasterofNone
2 жыл бұрын
I would. Worst case without it you could get some squeaks every now and then.
@mayken6661
5 ай бұрын
And theyre only on top ?
Did it help with the the bumpy ness of the ride
@JackofAllMasterofNone
3 жыл бұрын
Not sure exactly what you mean. It firmed up the rear end. More sporty feeling if anything.
@miguelhernandez4764
3 жыл бұрын
Grease all joints need gun its 52 bucks auto zone fix all noise for ya
How much are the springs?
@JackofAllMasterofNone
3 жыл бұрын
Depends. I got a good deal on eBay for around 100 for the pair. Gotta shop around.
@robertvilliard6768
3 жыл бұрын
Don't buy regular ones, the progressive springs give way better ride. Run $89 at O'Reilly
Wow
Wood this work on my 2001 grand marquis too
@JackofAllMasterofNone
3 жыл бұрын
Yes
@captainamericaamerica8090
3 жыл бұрын
WOULD*** I'M 12 AND CAN SPELL, BETTER THAN YOU
Hard to believe you used a sawzall for this job.
Do you nknow where motor mounts are located
@JackofAllMasterofNone
2 жыл бұрын
On the sides of the engine. Near where the exhaust manifold go down
Can you use these springs on the 89?
@JackofAllMasterofNone
2 жыл бұрын
I do not think so.
glad mines an 03.....
@JackofAllMasterofNone
Жыл бұрын
Yeah. 2003 was a major design change and much better suspension