Couldn't find videos on exactly how the Hilliard clutch of the 4 wheel drive works. Decided to make a video once I figured out how it worked.
Жүктеу.....
Пікірлер: 81
@bransonred14 жыл бұрын
Great explanation of how the hilliard clutch works. Thanks! I'm glad I'm not the only guy that has a crazy messy shop when I'm working on something.
@francisperreault21189 жыл бұрын
First person that could explain the functionning of the clutch. Thanks mate. It helped when you said the armature plate worked as a brake. cheers.
@andreythedon
9 жыл бұрын
just helping out where I can...glad it did you some good!
@joekirk1677 жыл бұрын
Thank you Bud. My tabs are worn off and now that the book doesn't explain what to look for , You answered all my Questions. My tabs are worn off. Off th Polaris to get two new ones tomorrow while I have both clutches out . Thanks again.
@michaelfrench343Ай бұрын
Thanks for the video, definitely know how it works now
@P.B.Theriver9 жыл бұрын
Best explanation so far. Thanks
@EarlRausch10 жыл бұрын
Hi from the Rocky Mountains, man I am sure glad i found your video! It was just what I needed to help me get my Trail boss back running. My clutch looks a bit different but same theory. I bought the atv already taken apart Thanks and great job ER
@matt021919928 жыл бұрын
Thank you so much for uploading this I've just acquired a polaris magnum 425 with this style of hub and was totally dumb founded on how they work but now i completely understand them and now can figure out why my one hub ain't locking
@dillonkluk9 жыл бұрын
This is an awesome explanation! Thanks so much for this, made it really simple repairing my 04s 4x4 system, keep up the great videos!
@OGBB3310 жыл бұрын
Gr8 video bro. I recently bought a Polaris Sportsman 500 4x4 and my left front wheel hub clutch is engaging even when AWD is turned off. I think I will disassemble the hub, bearing, and clutch and see if my Hilliard clutch or Armature plate is damaged. I had an idea how Polaris AWD worked but your video made it very clear. Keep the how to vids coming man! I think the Polaris 4wd system is great if you keep your hubs properly lubed and replace worn parts before they cause extreme damage. :)
@slammedncammed96577 жыл бұрын
I just got a scrambler 500 and this was very helpful, thanks!
@mwbjgamingprojects3 ай бұрын
That's very helpful, thanks to you explaining everything I believe that I can formulate a plan to bypass the electric magnet and just have analog full-time drive on mine 😀, I have a 1997 Polaris Magnum 425 6x6, so I'll get back to you it my plan works 😅.
@FuelTankerMan9 жыл бұрын
excellent treatise... I've always kinda wondered how that all worked. You explained it perfectly. :)
@zacharykarna28104 жыл бұрын
Pretty damn good video, considering you said you're not a mechanic. I'm an Automotive Technician and I can say I thought you explained this well. Good video. Would like to see more.
@robertwoerner204 жыл бұрын
Thanks for the explanation on this hub design. Now I get how it works!
@etstrauss Жыл бұрын
Great video, helped me! Thank you for taking the time to share.
@markstephens46062 жыл бұрын
Great job….simple explanation and accurate
@stuartpoovey64635 жыл бұрын
I am going with the others and say first one to truly explain how this thing works great info. now I can stop scratching my head and fix this Thing Thank You ! P.S You are The MAN!
@Dukk107811 жыл бұрын
Dude thanks for taking the time to video this. Very informative.
@wilson3707able8 жыл бұрын
Thx. Really helpful. I'll take mine apart and see if I can figure out the problem. I'll be back to ask you some questions if you don't mind
@ScrewTechSystems10 жыл бұрын
Thanks for the information. I am going to check this out as I have the problem of one of my front wheels not turning in AWD.
@damonironstand79837 ай бұрын
Awesome job explaining 💯
@minnesotakid132710 жыл бұрын
Thanks, the centrifugal forced clutch explains the on-demand AWD too.
@RandyTWA7 жыл бұрын
Thanks for making it make sense.
@carlatjoses10 жыл бұрын
thanks man you made it look real simple
@benjaminward52956 жыл бұрын
That was the best explanation thankyou !!
@th3duke17 жыл бұрын
Very good explanation - thank you!
@mr.octopus6972 Жыл бұрын
I've done my own experiment with this clutch. If you want to see in in action, just put a big bushing where the hub goes (that giant nut in the middle of the clutch, if you have an older one is just perfect for that). So without the hub installed you will see the difference when in 2x4 and 4x4 and be able to film it.
@hrmthermalimage8 жыл бұрын
Real good video!!!!!!! I agree with Francis, great explanation, i have a problem with my own 500ho, it will be interesting to do my own troubleshooting
@mike333h9 жыл бұрын
Great video man!
@Norton31392 жыл бұрын
Dude thank you. I found a broken wire!!
@vantech200711 жыл бұрын
hey thanks for the video, it helped me to fix my sons polaris 4 wheel drive Thank you
@mcZED38 Жыл бұрын
Great vid and explanation. My O8 Scrambler 500 is in pieces now to address a bad hub wobble. Im guessing the hub bearings but they dont look all that bad. I'll swap and see
@TheRoguewelder10 жыл бұрын
Great dude! Helped me a lot. You da bomb!
@johnnyrichmond8359 Жыл бұрын
Thanks buddy nice video
@zongyang66026 ай бұрын
Great video bro....
@caiomariano61438 жыл бұрын
Thanks mate. I was very confused about it.
@andreythedon
8 жыл бұрын
sure thing. I haven't rode in quite a while. Time to get back to it.
@triggity10804 жыл бұрын
Thanks man, very helpful!
@robertmintz634 жыл бұрын
Thanks for the explanation of the armature plate which acts as a brake to the outer half of the Hilliard clutch , did not know what that was called either THANKS , Now I can see what happens ! With the splines on the axle engaged in the splines of the inner part of the clutch, (the big nut ) & the outer half not rotating freely, the big roller bearings will be forced out against the hub , forcing 4x4 THANKS
@robertmintz63
4 жыл бұрын
Proud of you man for figuring that all out ! Also if that plate is distorted in any way it is garbage ! In other vids they tell you to place a straight edge across where the axle comes out of & where the armature plate comes up against should be .001” , if more than that it will not work properly
@billybullock69447 жыл бұрын
great information, thanks.
@frederickkennedy79313 жыл бұрын
I believe the reason the magnet assembly needs to have a good ground is to eliminate the problem where the armature plate becomes magnetized when not asked to be (I.e awd switch not on) this gives the plate a complete circuit to ground. Great Video, garage is a mess
@canadacactus9 жыл бұрын
Thanks, really helpful.
@josh57ist8 жыл бұрын
very helpful thank you sir
@mikebrandon30674 жыл бұрын
Great explanation!!!!
@michaelheninger13574 жыл бұрын
awsome. thank you. very helpful.
@southernoutdoors35556 жыл бұрын
This this really helped
@thomasgemzala32964 жыл бұрын
Great video
@GlennWheelerDrone6 жыл бұрын
Great explanation.....
@willrobinson95757 жыл бұрын
Helped me out. Thanks.
@andreythedon
7 жыл бұрын
Will Robinson I just wish I had time to ride it anymore!!
@roysnider92808 жыл бұрын
I'm having the same problem with my 2002 Polaris 400. Bought it used and someone before me has all the wireing all screwed up. Was wonder how it worked. Just wondering if i can wire the clutches directly to a switch. Dont think the 4 WD switch is working. Thanks for sharing and making it easy to understand
@timschannel9104 жыл бұрын
Hi I just seen this I just got one but its a 400 and when I put it into 4x4 one tire will move and the other will not. I am going to ck this out because the rubber boot behind it is gone that is on the drive axle. I hope there is not much to it.
@nombr11 жыл бұрын
Any vids on pulling the bendix/starter drive?...I have a 96 400 xplorer and the estarts not working so I have the recoil housing off but can't get the bendix out. Do you have any vidoes on hooking up the throttle cable?....mine sticks so I have to do that to
@maryvandyke9659 жыл бұрын
my magnet does not seem to have enough pull to hold it in place? any ideas?
@andreythedon11 жыл бұрын
yea I couldn't find many videos explaining it and I like to fix my own stuff (when I know what I'm doing!)
@peteramarose6 жыл бұрын
I’m getting power to the magnet but hub will not lock... has some resistance but will not lock fully
@carfeller9 жыл бұрын
Good video. This is going,to help me because I just picked up a 97 4x4 and it's only 3 wheel drive. I bet the bad part is the plate that locks it in. Thanks
@johnhoran8026
8 жыл бұрын
+Robert Remley I also have 3 wheel drive, Robert. My front right wheel is not turning. Did this work for you?
@carfeller
8 жыл бұрын
+John Horan no I had wires hooked up wrong on the wiring panel.
@TriStarGearhead3 жыл бұрын
Thanks!
@scottweyen55938 жыл бұрын
it was a good vidieo, is there any way I can make it full Time 4x4
@fernandogodinho96568 жыл бұрын
Awesome.
@vidajohnston93547 жыл бұрын
Thank you sir
@cashjob19756 жыл бұрын
Good video. I took mine apart lastnight and found my armature plates are bent in a concave shape. I'm assuming that's my problem, fingers crossed
@cumminsjake38154 жыл бұрын
Thanks
@JohnnyRebKy4 жыл бұрын
I’m still lost on it. My 400 scrambler 2 stroke started working in 3 wheel drive yesterday. I found my cv boot was cut open and it was exposed to mud and water. So I dunno if it just needs a new axle Or the hub parts are damaged ?
@adrew1963
4 жыл бұрын
you figure it out I only have 3 wheels turning on my polaris 500.Tore it down and found the armature plate pretty bent up put a new one in and still have only the same 3 wheels turning
@JohnnyRebKy
4 жыл бұрын
andycel schneider I haven’t tore into mine yet. But if your plate is good and everything looks good you need to check the current in the wiring with a meter. No current no wheel turn
@andreythedon11 жыл бұрын
Nice....You're Welcome
@andreythedon11 жыл бұрын
I sure don't man...sorry...I've got the 4 wheeler at my folks...when I get it back next time maybe I'll do a vid of the throttle cable hook up...not hard at all though.
@det6437 жыл бұрын
What was setting on the torque for the nut?
@andreythedon
7 жыл бұрын
det643 I honestly don't remember. it's been a while. I'll have to see if I can dig the PDF file. I should have the entire repair manual if you want it. Shoot me your email or something
@weed34600
7 жыл бұрын
126NM
@jeffersonmoctezuma37335 жыл бұрын
I think i put the armiture plate backwards
@SSteeleify2 жыл бұрын
Most of the problems with this system are... neglect of service of the hubs. Dead magnet or bad connection to the magnet. Or messed up armature plate tabs.
@lifebeginsat1907 жыл бұрын
great info but got motion sick from watching this...haha
@jaywinters2483 Жыл бұрын
I can't watch this: camera moving too much too fast. exiting out. Thank you for the effort, though.
@A2J_Tim2 жыл бұрын
good explanation of how this system works, What a terrible design though.
Пікірлер: 81
Great explanation of how the hilliard clutch works. Thanks! I'm glad I'm not the only guy that has a crazy messy shop when I'm working on something.
First person that could explain the functionning of the clutch. Thanks mate. It helped when you said the armature plate worked as a brake. cheers.
@andreythedon
9 жыл бұрын
just helping out where I can...glad it did you some good!
Thank you Bud. My tabs are worn off and now that the book doesn't explain what to look for , You answered all my Questions. My tabs are worn off. Off th Polaris to get two new ones tomorrow while I have both clutches out . Thanks again.
Thanks for the video, definitely know how it works now
Best explanation so far. Thanks
Hi from the Rocky Mountains, man I am sure glad i found your video! It was just what I needed to help me get my Trail boss back running. My clutch looks a bit different but same theory. I bought the atv already taken apart Thanks and great job ER
Thank you so much for uploading this I've just acquired a polaris magnum 425 with this style of hub and was totally dumb founded on how they work but now i completely understand them and now can figure out why my one hub ain't locking
This is an awesome explanation! Thanks so much for this, made it really simple repairing my 04s 4x4 system, keep up the great videos!
Gr8 video bro. I recently bought a Polaris Sportsman 500 4x4 and my left front wheel hub clutch is engaging even when AWD is turned off. I think I will disassemble the hub, bearing, and clutch and see if my Hilliard clutch or Armature plate is damaged. I had an idea how Polaris AWD worked but your video made it very clear. Keep the how to vids coming man! I think the Polaris 4wd system is great if you keep your hubs properly lubed and replace worn parts before they cause extreme damage. :)
I just got a scrambler 500 and this was very helpful, thanks!
That's very helpful, thanks to you explaining everything I believe that I can formulate a plan to bypass the electric magnet and just have analog full-time drive on mine 😀, I have a 1997 Polaris Magnum 425 6x6, so I'll get back to you it my plan works 😅.
excellent treatise... I've always kinda wondered how that all worked. You explained it perfectly. :)
Pretty damn good video, considering you said you're not a mechanic. I'm an Automotive Technician and I can say I thought you explained this well. Good video. Would like to see more.
Thanks for the explanation on this hub design. Now I get how it works!
Great video, helped me! Thank you for taking the time to share.
Great job….simple explanation and accurate
I am going with the others and say first one to truly explain how this thing works great info. now I can stop scratching my head and fix this Thing Thank You ! P.S You are The MAN!
Dude thanks for taking the time to video this. Very informative.
Thx. Really helpful. I'll take mine apart and see if I can figure out the problem. I'll be back to ask you some questions if you don't mind
Thanks for the information. I am going to check this out as I have the problem of one of my front wheels not turning in AWD.
Awesome job explaining 💯
Thanks, the centrifugal forced clutch explains the on-demand AWD too.
Thanks for making it make sense.
thanks man you made it look real simple
That was the best explanation thankyou !!
Very good explanation - thank you!
I've done my own experiment with this clutch. If you want to see in in action, just put a big bushing where the hub goes (that giant nut in the middle of the clutch, if you have an older one is just perfect for that). So without the hub installed you will see the difference when in 2x4 and 4x4 and be able to film it.
Real good video!!!!!!! I agree with Francis, great explanation, i have a problem with my own 500ho, it will be interesting to do my own troubleshooting
Great video man!
Dude thank you. I found a broken wire!!
hey thanks for the video, it helped me to fix my sons polaris 4 wheel drive Thank you
Great vid and explanation. My O8 Scrambler 500 is in pieces now to address a bad hub wobble. Im guessing the hub bearings but they dont look all that bad. I'll swap and see
Great dude! Helped me a lot. You da bomb!
Thanks buddy nice video
Great video bro....
Thanks mate. I was very confused about it.
@andreythedon
8 жыл бұрын
sure thing. I haven't rode in quite a while. Time to get back to it.
Thanks man, very helpful!
Thanks for the explanation of the armature plate which acts as a brake to the outer half of the Hilliard clutch , did not know what that was called either THANKS , Now I can see what happens ! With the splines on the axle engaged in the splines of the inner part of the clutch, (the big nut ) & the outer half not rotating freely, the big roller bearings will be forced out against the hub , forcing 4x4 THANKS
@robertmintz63
4 жыл бұрын
Proud of you man for figuring that all out ! Also if that plate is distorted in any way it is garbage ! In other vids they tell you to place a straight edge across where the axle comes out of & where the armature plate comes up against should be .001” , if more than that it will not work properly
great information, thanks.
I believe the reason the magnet assembly needs to have a good ground is to eliminate the problem where the armature plate becomes magnetized when not asked to be (I.e awd switch not on) this gives the plate a complete circuit to ground. Great Video, garage is a mess
Thanks, really helpful.
very helpful thank you sir
Great explanation!!!!
awsome. thank you. very helpful.
This this really helped
Great video
Great explanation.....
Helped me out. Thanks.
@andreythedon
7 жыл бұрын
Will Robinson I just wish I had time to ride it anymore!!
I'm having the same problem with my 2002 Polaris 400. Bought it used and someone before me has all the wireing all screwed up. Was wonder how it worked. Just wondering if i can wire the clutches directly to a switch. Dont think the 4 WD switch is working. Thanks for sharing and making it easy to understand
Hi I just seen this I just got one but its a 400 and when I put it into 4x4 one tire will move and the other will not. I am going to ck this out because the rubber boot behind it is gone that is on the drive axle. I hope there is not much to it.
Any vids on pulling the bendix/starter drive?...I have a 96 400 xplorer and the estarts not working so I have the recoil housing off but can't get the bendix out. Do you have any vidoes on hooking up the throttle cable?....mine sticks so I have to do that to
my magnet does not seem to have enough pull to hold it in place? any ideas?
yea I couldn't find many videos explaining it and I like to fix my own stuff (when I know what I'm doing!)
I’m getting power to the magnet but hub will not lock... has some resistance but will not lock fully
Good video. This is going,to help me because I just picked up a 97 4x4 and it's only 3 wheel drive. I bet the bad part is the plate that locks it in. Thanks
@johnhoran8026
8 жыл бұрын
+Robert Remley I also have 3 wheel drive, Robert. My front right wheel is not turning. Did this work for you?
@carfeller
8 жыл бұрын
+John Horan no I had wires hooked up wrong on the wiring panel.
Thanks!
it was a good vidieo, is there any way I can make it full Time 4x4
Awesome.
Thank you sir
Good video. I took mine apart lastnight and found my armature plates are bent in a concave shape. I'm assuming that's my problem, fingers crossed
Thanks
I’m still lost on it. My 400 scrambler 2 stroke started working in 3 wheel drive yesterday. I found my cv boot was cut open and it was exposed to mud and water. So I dunno if it just needs a new axle Or the hub parts are damaged ?
@adrew1963
4 жыл бұрын
you figure it out I only have 3 wheels turning on my polaris 500.Tore it down and found the armature plate pretty bent up put a new one in and still have only the same 3 wheels turning
@JohnnyRebKy
4 жыл бұрын
andycel schneider I haven’t tore into mine yet. But if your plate is good and everything looks good you need to check the current in the wiring with a meter. No current no wheel turn
Nice....You're Welcome
I sure don't man...sorry...I've got the 4 wheeler at my folks...when I get it back next time maybe I'll do a vid of the throttle cable hook up...not hard at all though.
What was setting on the torque for the nut?
@andreythedon
7 жыл бұрын
det643 I honestly don't remember. it's been a while. I'll have to see if I can dig the PDF file. I should have the entire repair manual if you want it. Shoot me your email or something
@weed34600
7 жыл бұрын
126NM
I think i put the armiture plate backwards
Most of the problems with this system are... neglect of service of the hubs. Dead magnet or bad connection to the magnet. Or messed up armature plate tabs.
great info but got motion sick from watching this...haha
I can't watch this: camera moving too much too fast. exiting out. Thank you for the effort, though.
good explanation of how this system works, What a terrible design though.