This was my first bike as a teen back in 1995 I've always wanted to find one for a project but every time I find one they're hammered and way overpriced, beautiful bike you do nice work
@acardona909
3 жыл бұрын
How much you trying to spend on one
@Mr10usdad4 жыл бұрын
Great job! This year is one of the best looking bikes. I have a 1986 CR125 and a 1995 CR250 I just restored.
@rurugocrazy967
3 жыл бұрын
Where you find plastics ? I have a Cr125 1988 but can’t find plastics
@zacharywatters1843
3 жыл бұрын
I just picked up an 86 CR125 project and have a 1990 CR250r awaiting restoration. Going to sell the 125 even though I'd like to build it, just have too many projects
@TTR66
3 жыл бұрын
@@zacharywatters1843 125 still available...contact me
@zacharywatters1843
3 жыл бұрын
@@TTR66 Sold it a couple days after I bought it, bike is running/riding and going through full restoration
@20BMR3 жыл бұрын
That’s a cool ass restoration, nice build man💯🤙🏼.
@constructionkings68462 жыл бұрын
Gracias por compartirlo Jimmy 👍 que guay un saludo
@free-birdrocker88092 жыл бұрын
My friend, you hit a home run with your CR! The gold excel rims set it off, gives it a works bike apppearance. I bet this bike flat hauls! I noticed zippy ties for zie fork boots. You can order all 4 metal clamps for that size boots. Think 90's xr-650, they have tons of them, for the upper and lower parts of the boot. You can keep the boots flush under the triple clamp and not have the 80's leg warmer boot look. LOL! Ps, I have his bigger brother in my garage, the 89' 250R. and its a ripper. Great Job!
@jkiseracing
2 жыл бұрын
Hey there. Thanks for great comments. And greatvtip on the clamps too!! I'll check that out.
@free-birdrocker8809
2 жыл бұрын
@@jkiseracing Jim, can I ask a quick question, My 250R has a stained rear rim, the front is ok, is there a fluid or spray or something I can put on it to clean up the white spots? If you have a tip, id be grateful. Thanks Jimmy!
@stevejones68048 ай бұрын
Bought 1new in 89 , still my favourite looking bike..❤
@jkiseracing
Ай бұрын
No doubt the 88/89's were so cool! And fast!!
@stevejones68048 ай бұрын
Great restoration by the way 👏 👍..
@jkiseracing
8 ай бұрын
Thanks! This was restoration #2 in a line of many more through the years
@stephaneracicot7912 жыл бұрын
i just got a1982 cr 125 everything there bike and runs with owner ships dont see that to often love your bike man good job plan on doing mine but not all of it again nice job looks real good.
@carlieswink33602 жыл бұрын
I wish I could post photos to be honest. I'm smack dab in the middle of restoring my 89 cr125 as well. If there could be a problem with the engine when I got the bike, this engine had it. Very clean resto. 👌
@jkiseracing
2 жыл бұрын
I understand that! I've actually done two 89 CR125s and almost finished with an 88 now. The 88 is almost the same bike.
@rochellestanley95322 жыл бұрын
Awesome MxKeid replica.👍
@Mr10usdad3 жыл бұрын
great job!
@Lamotobylette3 жыл бұрын
Beau boulot 👍
@ianmangham45703 жыл бұрын
Totally AWESOME
@gcostanza2115 Жыл бұрын
Very good restoration. The CR's of that era take some beating. It's a shame Honda moved over to the alloy frame, the steel frame is better in every respect, in my opinion.
@TN_HondaDad Жыл бұрын
Bellissima!!
@ederrangel79342 жыл бұрын
Cool!!😍
@diegodeluise8363 Жыл бұрын
amazing,i restored 1998 cr 125
@user-eg5ys8nm7sАй бұрын
So beautiful ❤
@jkiseracing
29 күн бұрын
@@user-eg5ys8nm7s thanks! It's definitely a popular one and one of my personal favorites
@utahdesertrider18063 жыл бұрын
I had a 1989 CR125. I loved it back then but now I wonder how good was it? I ride a 300 now. I remember burning out a few pistons. Gotta rev them out!
@djantix1200 Жыл бұрын
Amazing job on this bike! I'm restoring an '86 125 right now. Did you have to drill out the spoke holes in the hubs for the Excel spoke set?
@jkiseracing
Жыл бұрын
Thanks. Actually I sent the wheels to Dubya for the oe rebuild
@djantix1200
Жыл бұрын
@@jkiseracing Right on, thnx!
@tchoups872 жыл бұрын
belle restauration
@thomashpdk30973 жыл бұрын
Hello JImmy, i really need some help here, do you know how many milimeters before top end? I am not that good at english but timing, do you know what timing it needs to be at?
@salimbaloch60772 жыл бұрын
Nice
@Junior-fd8ux3 жыл бұрын
Man you killed this. I have two of these bikes that I'm always messing with and buying more pieces to hopefully get the end result you did one of these days. Also if you don't mind me asking what method of painting, color and brand did you use on the case, brakes, ect. You really got it down..also how what route did you go to get the tank to shine like that. Its outglowing the new plastic im some pics lol. Very impressive.
@jkiseracing
3 жыл бұрын
Thanks for the encouraging words. As far as color codes I simply went with powder coat on the frame. I asked the powder coater to give me something as close to Honda red or fire engine red that he had. I think I just got lucky there because it turned out fantastic. But the powder coater I use has always done fantastic work. On the tank I used a standard plastic refinishing method. Which starts out with a heavier grit sandpaper and then work your way up. Then heat to bring out the shine. There are several KZread videos showing that process.
@Junior-fd8ux
3 жыл бұрын
@@jkiseracing thanks for the info brother. Your powder guy nailed and you nailed it.. The tank looks better then the come new, must have been missing some skin on your finger tips after that wet sanding lol. Everything is top notch. Very inspiring bro!
@26mai692 жыл бұрын
nice
@immaboss45263 жыл бұрын
💯💯❤️
@martinpruckl80912 жыл бұрын
Pure Red2 Honda!!
@daneagan76562 жыл бұрын
Great bike, couldn't take the music anymore
@jkiseracing
2 жыл бұрын
Turn down the volume then. Easy
@leelee42172 жыл бұрын
Oh my God! Jimmy.
@basf22203 жыл бұрын
awesome build. about to start one on a 89 myself. Why did you go with gold wheels?
@jkiseracing
3 жыл бұрын
Although gold wheels were not standard in 89, I chose the gold wheels just to highlight the classic late 80s Honda look.
@tcrides21372 жыл бұрын
I'm going through the same thing right now. Just asking someone who has already restored one. Did you use the original inner clutch cover? Yours looks awesome
@jkiseracing
2 жыл бұрын
On this one I did. Believe it or not there was zero rot on this one.
@discmotoslots2 жыл бұрын
mx kid replica. nice!
@stephenburns32222 ай бұрын
Where do you get your plastics trying to get some now. Thanks great looking bike awesome job.
@jkiseracing
Ай бұрын
UFO makes a great replica plastic set. Sometimes you have to rely on Ebay too.
@Goon_Toob3 жыл бұрын
cant find any headers for my 88' cr125 not even on ebay, any suggestions
@jkiseracing
3 жыл бұрын
It's a constant search. I just kept looking on eBay daily. For months. Eventually one will show up.
@jamescuthrell88414 жыл бұрын
I have the same bike & im looking for the factory decals? Any direction?
@aarmancuda3570
4 жыл бұрын
maybe UFO graphics?
@jkiseracing
4 жыл бұрын
Yessir. When it comes to old MX bike restorations, Ebay is your friend!!
@jaygetgwuap4213
3 жыл бұрын
Ebay
@stephaneracicot7912 жыл бұрын
would you know of any good place to find parts for an 1982 cr 125 in the states i dont know if you work for a dealership or own one just asking again thank you ps im from ontario canada
@jkiseracing
2 жыл бұрын
Start with a supplier of oem parts. I use Motosport and RMATV a lot for those. I use ebay quite a bit too. What parts I can't find means I restore the one I have.
@ppd1133
2 жыл бұрын
@@jkiseracing if you have to restore the parts you have how do you go about doing that? Like your triple clamps… they look new.
@jkiseracing
2 жыл бұрын
@@ppd1133 the vapor blasting process made those clamps look new. I also send the carb, engine mounts airbox swing arm, and really any other aluminum and metal parts.
@marcemr7085 Жыл бұрын
🇭🇳🇭🇳👍👍
@lam11253 жыл бұрын
Great job !!! What was the final price detailed please ?
@jkiseracing
3 жыл бұрын
Unfortunately I did not keep up with the price of this build. Because it was my personal bike I didn't really account. Normally I keep up with the entire cost of a build. On this one I didn't.
@kenharris87432 жыл бұрын
Sometimes I think the old bikes were prettier than the new one's
@jkiseracing
2 жыл бұрын
Definitely agree. The late 80s and 90s had a look that still turn heads today.
@GSkill-nm3wv
2 жыл бұрын
I had a 1986 Honda CR 125 that I bought in 1992. Unfortunately it got destroyed from a head on collision with a car. But I'm still here to tell the story.
@Wyatt.6oh2 жыл бұрын
Where do you get your parts i gotta 89 cr250 and i cant fing anything
@jkiseracing
2 жыл бұрын
I use rmatvmc a lot for oem parts. I search eBay and FB marketplace for nearly everything else. I'm constantly on the lookout.
@Wyatt.6oh
2 жыл бұрын
@@jkiseracing ok, thank you
@ianmangham45703 жыл бұрын
JUMP BIKE
@scottpeters52602 жыл бұрын
Great video. But that music is depressing.
@jkiseracing
2 жыл бұрын
Ha ok. New music on the next one
@kirbylee573 жыл бұрын
LOL
@bradleys3783 жыл бұрын
Annoying music.
@jkiseracing
3 жыл бұрын
Thanks.
@WyMustIGo2 жыл бұрын
He cleaned it, did not restore it.
@jkiseracing
2 жыл бұрын
Haha. I don't think so.
@WyMustIGo
2 жыл бұрын
@@jkiseracing I do
@jkiseracing
2 жыл бұрын
@@WyMustIGo "you" would be wrong sir. Check out some of the other videos to learn some of the processes and updates on other bikes!👍
Пікірлер: 86
This was my first bike as a teen back in 1995 I've always wanted to find one for a project but every time I find one they're hammered and way overpriced, beautiful bike you do nice work
@acardona909
3 жыл бұрын
How much you trying to spend on one
Great job! This year is one of the best looking bikes. I have a 1986 CR125 and a 1995 CR250 I just restored.
@rurugocrazy967
3 жыл бұрын
Where you find plastics ? I have a Cr125 1988 but can’t find plastics
@zacharywatters1843
3 жыл бұрын
I just picked up an 86 CR125 project and have a 1990 CR250r awaiting restoration. Going to sell the 125 even though I'd like to build it, just have too many projects
@TTR66
3 жыл бұрын
@@zacharywatters1843 125 still available...contact me
@zacharywatters1843
3 жыл бұрын
@@TTR66 Sold it a couple days after I bought it, bike is running/riding and going through full restoration
That’s a cool ass restoration, nice build man💯🤙🏼.
Gracias por compartirlo Jimmy 👍 que guay un saludo
My friend, you hit a home run with your CR! The gold excel rims set it off, gives it a works bike apppearance. I bet this bike flat hauls! I noticed zippy ties for zie fork boots. You can order all 4 metal clamps for that size boots. Think 90's xr-650, they have tons of them, for the upper and lower parts of the boot. You can keep the boots flush under the triple clamp and not have the 80's leg warmer boot look. LOL! Ps, I have his bigger brother in my garage, the 89' 250R. and its a ripper. Great Job!
@jkiseracing
2 жыл бұрын
Hey there. Thanks for great comments. And greatvtip on the clamps too!! I'll check that out.
@free-birdrocker8809
2 жыл бұрын
@@jkiseracing Jim, can I ask a quick question, My 250R has a stained rear rim, the front is ok, is there a fluid or spray or something I can put on it to clean up the white spots? If you have a tip, id be grateful. Thanks Jimmy!
Bought 1new in 89 , still my favourite looking bike..❤
@jkiseracing
Ай бұрын
No doubt the 88/89's were so cool! And fast!!
Great restoration by the way 👏 👍..
@jkiseracing
8 ай бұрын
Thanks! This was restoration #2 in a line of many more through the years
i just got a1982 cr 125 everything there bike and runs with owner ships dont see that to often love your bike man good job plan on doing mine but not all of it again nice job looks real good.
I wish I could post photos to be honest. I'm smack dab in the middle of restoring my 89 cr125 as well. If there could be a problem with the engine when I got the bike, this engine had it. Very clean resto. 👌
@jkiseracing
2 жыл бұрын
I understand that! I've actually done two 89 CR125s and almost finished with an 88 now. The 88 is almost the same bike.
Awesome MxKeid replica.👍
great job!
Beau boulot 👍
Totally AWESOME
Very good restoration. The CR's of that era take some beating. It's a shame Honda moved over to the alloy frame, the steel frame is better in every respect, in my opinion.
Bellissima!!
Cool!!😍
amazing,i restored 1998 cr 125
So beautiful ❤
@jkiseracing
29 күн бұрын
@@user-eg5ys8nm7s thanks! It's definitely a popular one and one of my personal favorites
I had a 1989 CR125. I loved it back then but now I wonder how good was it? I ride a 300 now. I remember burning out a few pistons. Gotta rev them out!
Amazing job on this bike! I'm restoring an '86 125 right now. Did you have to drill out the spoke holes in the hubs for the Excel spoke set?
@jkiseracing
Жыл бұрын
Thanks. Actually I sent the wheels to Dubya for the oe rebuild
@djantix1200
Жыл бұрын
@@jkiseracing Right on, thnx!
belle restauration
Hello JImmy, i really need some help here, do you know how many milimeters before top end? I am not that good at english but timing, do you know what timing it needs to be at?
Nice
Man you killed this. I have two of these bikes that I'm always messing with and buying more pieces to hopefully get the end result you did one of these days. Also if you don't mind me asking what method of painting, color and brand did you use on the case, brakes, ect. You really got it down..also how what route did you go to get the tank to shine like that. Its outglowing the new plastic im some pics lol. Very impressive.
@jkiseracing
3 жыл бұрын
Thanks for the encouraging words. As far as color codes I simply went with powder coat on the frame. I asked the powder coater to give me something as close to Honda red or fire engine red that he had. I think I just got lucky there because it turned out fantastic. But the powder coater I use has always done fantastic work. On the tank I used a standard plastic refinishing method. Which starts out with a heavier grit sandpaper and then work your way up. Then heat to bring out the shine. There are several KZread videos showing that process.
@Junior-fd8ux
3 жыл бұрын
@@jkiseracing thanks for the info brother. Your powder guy nailed and you nailed it.. The tank looks better then the come new, must have been missing some skin on your finger tips after that wet sanding lol. Everything is top notch. Very inspiring bro!
nice
💯💯❤️
Pure Red2 Honda!!
Great bike, couldn't take the music anymore
@jkiseracing
2 жыл бұрын
Turn down the volume then. Easy
Oh my God! Jimmy.
awesome build. about to start one on a 89 myself. Why did you go with gold wheels?
@jkiseracing
3 жыл бұрын
Although gold wheels were not standard in 89, I chose the gold wheels just to highlight the classic late 80s Honda look.
I'm going through the same thing right now. Just asking someone who has already restored one. Did you use the original inner clutch cover? Yours looks awesome
@jkiseracing
2 жыл бұрын
On this one I did. Believe it or not there was zero rot on this one.
mx kid replica. nice!
Where do you get your plastics trying to get some now. Thanks great looking bike awesome job.
@jkiseracing
Ай бұрын
UFO makes a great replica plastic set. Sometimes you have to rely on Ebay too.
cant find any headers for my 88' cr125 not even on ebay, any suggestions
@jkiseracing
3 жыл бұрын
It's a constant search. I just kept looking on eBay daily. For months. Eventually one will show up.
I have the same bike & im looking for the factory decals? Any direction?
@aarmancuda3570
4 жыл бұрын
maybe UFO graphics?
@jkiseracing
4 жыл бұрын
Yessir. When it comes to old MX bike restorations, Ebay is your friend!!
@jaygetgwuap4213
3 жыл бұрын
Ebay
would you know of any good place to find parts for an 1982 cr 125 in the states i dont know if you work for a dealership or own one just asking again thank you ps im from ontario canada
@jkiseracing
2 жыл бұрын
Start with a supplier of oem parts. I use Motosport and RMATV a lot for those. I use ebay quite a bit too. What parts I can't find means I restore the one I have.
@ppd1133
2 жыл бұрын
@@jkiseracing if you have to restore the parts you have how do you go about doing that? Like your triple clamps… they look new.
@jkiseracing
2 жыл бұрын
@@ppd1133 the vapor blasting process made those clamps look new. I also send the carb, engine mounts airbox swing arm, and really any other aluminum and metal parts.
🇭🇳🇭🇳👍👍
Great job !!! What was the final price detailed please ?
@jkiseracing
3 жыл бұрын
Unfortunately I did not keep up with the price of this build. Because it was my personal bike I didn't really account. Normally I keep up with the entire cost of a build. On this one I didn't.
Sometimes I think the old bikes were prettier than the new one's
@jkiseracing
2 жыл бұрын
Definitely agree. The late 80s and 90s had a look that still turn heads today.
@GSkill-nm3wv
2 жыл бұрын
I had a 1986 Honda CR 125 that I bought in 1992. Unfortunately it got destroyed from a head on collision with a car. But I'm still here to tell the story.
Where do you get your parts i gotta 89 cr250 and i cant fing anything
@jkiseracing
2 жыл бұрын
I use rmatvmc a lot for oem parts. I search eBay and FB marketplace for nearly everything else. I'm constantly on the lookout.
@Wyatt.6oh
2 жыл бұрын
@@jkiseracing ok, thank you
JUMP BIKE
Great video. But that music is depressing.
@jkiseracing
2 жыл бұрын
Ha ok. New music on the next one
LOL
Annoying music.
@jkiseracing
3 жыл бұрын
Thanks.
He cleaned it, did not restore it.
@jkiseracing
2 жыл бұрын
Haha. I don't think so.
@WyMustIGo
2 жыл бұрын
@@jkiseracing I do
@jkiseracing
2 жыл бұрын
@@WyMustIGo "you" would be wrong sir. Check out some of the other videos to learn some of the processes and updates on other bikes!👍