1989 CHEVY CAPRICE REAR COIL-OVER INSTALL
Автокөліктер мен көлік құралдары
Please remember that we are trained professionals. We do not recommend you do or try anything you see in this video or comments. There are many variables that we can control or are aware of. If you do what is seen in this video you can injury/kill yourself, others, or everyone. You can also cost yourself or others lots of money if you do what is seen in this video. DO NOT DO WHAT YOU SEE IN THIS VIDEO OR COMMENTS.
UMI REAR CONTROL ARM INSTALL
REAR QA1 REAR COIL-OVER INSTALL
BMR REAR END BUSHING INSTALL
Пікірлер: 45
FINALLY, SOMEONE WHO DOES A DETAIL OVERVIEW OF THE PARTS THAT ARE USED IN THE BOX CHEVY COILOVER CONVERSION... MUCH APPRECIATED... 😎💪🏿💪🏿💪🏿💪🏿💪🏿
There is nothing like a honest mechanic can you get nothing but blessings that way 👌🏿
@whiteoneauto
2 жыл бұрын
Thanks
@mattbartolovich8228
2 жыл бұрын
And a good vehicle on top of that
What’s the part number for the bracket on the bottom of the qa1 shock
This was a great video and showed the detail of the work. Great jobs💯💯💯
Love this brother
Was wondering if you remembered the link for the bushings
Does the rear coilovers eliminate the coil springs? Thanks
@whiteoneauto
Жыл бұрын
Yes.
What do u use for tire rods in the front
@whiteoneauto
2 жыл бұрын
Stock replacement tie rod ends but replaced the sleeve with bullet aluminum sleeves.
Do you/can you still get the "floaty" ol school ride with the upgrade or does it just depend on which coilovers you get and how you adjust them?
@whiteoneauto
2 жыл бұрын
The ride feel very controlled. If you turn the wheel the car turn not thinks then turns.
@JDSpeaks
2 жыл бұрын
@@whiteoneauto appreciate your reply. As I've seen a very knowledgeable and upstanding brotha from your videos, I wish you nothing but future success. Keep the videos coming.
I'm trying to find out what spring rate I need for my 88 box. Performance driving, 15 or 16 in wheels. It's 4200lbs with me in it but I'm not sure about how much the front and rear weigh separately. I think I'm going with qa1 sb 383 as well w/ aluminum heads..... Any help appreciated....
@whiteoneauto
2 жыл бұрын
Put the car on a set of scales that give you front back and side to weight measurement. Then select your spring size.
Do you have any videos for the front suspension lift installation or short video. Had a car come to my shop for custom audio installation and his front set up doesn't look good at all. Lower ball joint is angled when on the ground, upper control arm is tight to the frame. I believe he is using the original spring and shock which could be the issue or it's something else. I will do a video tomorrow of how it looks to share in your comments if you could help or explain any issue you see. I've never done these, Primarily audio builds, installs and repairs. Much appreciated and awesome content.
@whiteoneauto
Жыл бұрын
No detailed video yet.
@stevenb320
Жыл бұрын
@@whiteoneauto Thank you. Definitely something with this set up doesn't look right with how the ball joints are angled and I also noticed the front end sits slightly higher than the rear. His coil springs look curved or pinched as well because 1 side touches the physical shock.
@stevenb320
Жыл бұрын
kzread.info/dash/bejne/nJWMpMOGkbesiKw.html
@stevenb320
Жыл бұрын
Added a video link for the car front suspension that is in question
Yoooo I got a TH 400 I'm tryna put in my 89 caprice what did you have to do to run that trans this is my first time doing a swap so any info will help it had a 200-4r in it right now
@whiteoneauto
2 жыл бұрын
Summit crosmember that will bolt TH400 in a caprice. You will need a different driveshaft. I would make a new other that cutting the original one down.
How are they working out for you?
@whiteoneauto
25 күн бұрын
GREAT!
@boxkilla7314
25 күн бұрын
@@whiteoneauto Nice! What size wheels on the box?
Where you located... whats your turn around time for a full suspension and brake job?
@whiteoneauto
2 жыл бұрын
Detroit,MI. Normally about a week. Call the shop 313-264-1689 leave message we will get back with you.
I can’t find the adjustable lowers to save my life💪💪💪💪
@whiteoneauto
3 жыл бұрын
I have customer selling some. Email shop if interested Fixyourcar@whiteoneauto.com
Where can i find those coil over mounting brackets for rear
@whiteoneauto
2 жыл бұрын
That QAI coilover kit we have 2 in-stock. 313-264-1689
Where did u get the adjustable arms
@whiteoneauto
2 жыл бұрын
They made by UMI if you can't find them we have some in stock. You can call the shop and leave a message 313-264-1689.
How much u guys charge to install this set up I have l my qa1 parts for front and rear
@whiteoneauto
2 жыл бұрын
Call the shop 313-264-1689.
Say Bro....do you have any connections in Milwaukee? Great footage...work
@whiteoneauto
2 жыл бұрын
No sir
Hey where you guys located at
@whiteoneauto
2 жыл бұрын
WhiteOneAutoLLC 12245 Harper Detroit MI 48213 313-264-1689
Where you located
@whiteoneauto
3 жыл бұрын
WhiteOneAutoLLC 12245 Harper Detroit MI 48213 313-264-1689 call for appointment please
Where u located
@whiteoneauto
2 жыл бұрын
WhiteOneAutoLLC 12245 Harper Detroit MI 48213 313-264-1689 call for an appointment. Thanks