Parts used linked in the description of the video!

@user-vf3du3hs8u

Жыл бұрын

Hey, have the same w124 here with door bass speakers and fader button in middle. So i'm wondering, one person sayd that there is no need to cut and do all this stuff with cables, in stead use adaptor called: backer Power speaker to DIN ISO adaptor. Any info about this move and is it better to make it that way?

Probably the best video for these cars I've ever seen. My 1992 190e is similar and you've helped me a great deal. Thank you.

Thanks for showing how to route the cable to the stereo to thinkgs under the carpet at the front. I want to install a digital antenna and bluetooth mic to my new stereo, and this will be massively helpful.

I just inherited this vehicle. I needed this!!! Thank you!!!!

Great video. Thanks. Definitely know Sugar Ray 🙂

Bro good work made me does my audio myself !

Great video for w124 with the extra amps in rear. Does your power antenna work? Which wire is the antenna power from the car?

@tydale8629

3 жыл бұрын

Im trying to figure that out right now!! did you ever find out?

Awesome Video. I was wondering did you have to use a stereo installation kit or did it just slide in the stock opening?

Does the antenna still work? The antenna needs to get power from the radio to roll up. What cord is the antenna cord, that connects to the radio for power? The cord you connect from the antenna to the radio in this video is not the power cord. I have a W116 so maybe things are a bit different on my chassis.

I just spent a lot by installing the original stereo in my W124 300E...

later models that did not have the fader switch in the console adhere to an ISO standard for the connections at the back of the stereo. Maybe 1994 on up?

Hello. Is there a way i could hide the wires the same way on my 1990 190e 2.6? I'm planning on wiring the 4 new replacement speakers i got directly to the single din head. that a good idea? Thank you.

So I have a 1995 Mercedes E-300 diesel and I am planning on putting in a sub and amp as well as a new head unit. It is my understanding that there is two different metra harnesses for this vehicle there is the amp integration model number 70-1786, as well as the non amp number 70-9401. I do not have the same fader control button that this vehicle had, mine was purely run by my head unit. So does that mean that I don't have the amp? Crutchfield recommended that I get the non amp version but metra said it may use either one. As well I guess I could run new speaker wire and install like you have in this vehicle. However, after just having done this in my ram and realizing how difficult it can be I don't know if I am quite ready to do it again yet! Any help would be greatly appreciated thank you!

Hey, have the same w124 here with door bass speakers and fader button in middle. So i'm wondering, one person sayd that there is no need to cut and do all this stuff with cables, in stead use adaptor called: backer Power speaker to DIN ISO adaptor. Any info about this move and is it better to make it that way?

Hi there just want to know how do you put the radios in place, i try to do it but the space its a little small and the radio case won't fit,.

Those 2 pairs of gray and brown wires that connect to those speaker type connectors (visible at 2:32), do you remember where those wires lead to? Thanks.

My 91 Mercedes 300e has a radio alarm system will that affect anything???

Kind regards, with the antenna extension cable the retractable antenna remains working when turning the radio on and off?

@charlesnicholson1915

10 ай бұрын

on my w124 the antenna does not work after i ran the extension cable,is there a fuse for the antenna

hey guys!! i got that mercedes her in salt lake! you did the install in my car...but now the front speakers are not working.. also the antena, where you are located

@caposolomon8745

4 жыл бұрын

The wire that hook on to the speaker it self probably came lose. Just take out the speaker and repair the connection

Which cables are the door speakers

So frustrated. I have rewired accordingly but getting no power. Its brand new, checked fuses etc. No idea whats going on :(

What's the part number for the wire harness

I I’m trying to put a aftermarket radio in my 1993 Mercedes Benz 190e 1.8L but I can’t find anything about it

Hi, The speakers issue an annoying sound when I step on the fuel as the solution to my problem

@ProvoBeastAudio

5 жыл бұрын

Sounds like you have a ground loop issue. Try grounding your radio to a better location, or use a ground loop isolator.

@GeorgiaOverlander

5 жыл бұрын

What ohm speaker wire are you using ?

Good night, greetings, I have an original 93 Mercedes Benz W124 stereo, and when I turn it on I get the word wait. I do not know how to remove it since the player does nothing else, could you help me, thanks

@emreakin8861

3 жыл бұрын

The reason is, you have entered the wrong code 3 times, then the radio is blocked for 10minutes with "WAIT" written on the screen. Fastest way, disconnect the battery and connect again, then radio is reset to code entry. Enter the code properly, its done.

What about the door speakers

@obnxsdonky9394

3 жыл бұрын

what about them?

No sock to protect the shift lever :)

would this be the same for a 1991 Mercedes 300 SE?

How would this work with out the amps?

@ProvoBeastAudio

5 жыл бұрын

The radio has a built in internal amplifier which pushes out about 20w RMS x 4

WHAT WIRE IS WHAT SPEAKER!? Nobody ever talks about it I can’t figure out what to wire together😭

@ShinyRedGrapple

3 жыл бұрын

Heres the audio wiring diagram, it lists everything by color: tinyurl.com/y34wdbuk

Factory becker radios are rare and expensive, and there is still people that prefers that crappy radios for the simple reason that they have cds, Bluetooth, aux input and so on... Jesus.

The radio is not the radio per say. It acts like a preamp with all the amps and tuner in the trunk.

@charlesnicholson1915

10 ай бұрын

my antenna on my 92 3ooce no longer works after using the extension cable,is there a fuse for the anntenna

Would this work on a 1985 190e?

@peetu5986

5 жыл бұрын

Thats What im thinking too

@JoseVelez-yx9uj

4 жыл бұрын

Hello my name is Enrique my 1991 Mercedes 560 I want to change the factory caset for regular radio with bluetooth I can't not do show me please thank Denver CO

I have a 93 300D 2.5 Turbo where can I get the harness from?

@kyanschroeder2449

4 жыл бұрын

Rueben Orelue me too!

What if you don't have the keys for the clips

@ProvoBeastAudio

2 жыл бұрын

Make some, or find some.

My amp is different

Can somebody help me with the car radio code?

@S550Nick

3 жыл бұрын

Do you get the please wait message on the radio?

@agallegos159

3 жыл бұрын

Mine does. It says wait. Honestly I rather keep the original radio but I don't know how to fix it.

Where do i get the key and harness plug in?

@ProvoBeastAudio

3 жыл бұрын

Amazon or eBay

2:53 radio pinout

thats my car... jajaj that one came from factory with active base system... jaja i have to put the original radio and fix all the mess you did to get it right.. the antenna never work after you guys install the radio..you just bypass the spkers... poor job.

@MatthewDannevik

4 жыл бұрын

Antenna always breaks

I neeed help

HAHAHA easy to get in that player ..show me!

Its a class E not a 300 class.

@alm4132

2 жыл бұрын

Not until 1995........

@markanderson8980

2 жыл бұрын

@@alm4132 I guess all three of us learned something they were 300 Class E -Einigspritzen from 1953 to 1993 and then E class from 1993. en.wikipedia.org/wiki/Mercedes-Benz_E-Class

Oh really? Bullet connectors? You fool!

Just removed best original player and install modern bullshit. best way is to install BT module into old player