I love the fact that you are recording the good times with your father

@RobertDickens2002

Жыл бұрын

I agree he will be grateful he did

I have an 1984 Bronco with a 302 sitting in my driveway, and only recently have I started seeing more of this era. The engine was not stuck, but the steering column bearings were shot so I am currently rebuilding the steering column. Thanks for sharing and saving another Bronco!

@RevStoration

Жыл бұрын

Hope your is up and driving before long.

I can’t believe how good this 302 runs from stuck to the ole man doing posi traction marks in the dirt. I can’t wait for the next video revival of the next vehicle that y’all got. May Y’all have a Blessed One David.

This episode reminded me of unsticking my 302 in my F150. It took some elbow grease and some ATF, but I finally broke loose! Now I just finished an almost complete rebuild with some "go faster" parts.

Hey Rev.....now Bishop has a play mate!!!!!

Love that generation of Bronco, keep on fixing the Fords.

I love the content you and your dad provides to us and I envy your relationship with the Ole Man. My Dad died in 1972 and I think of him constantly!

I like the way y'all do not give up on the old rigs Y'all got more patience than me Love your videos You and the old man put out Stay safe

Rev that wire nut on the coil did the trick! Lord oh Lord what a FORD!

Your mom is something I beet your dad had her scared to death the way he took off love you all and God bless you all

The Bronco needs a can of Bardahl. There's a guy in a black trench coat with a can in his coat pocket. Remember those commercials?

We're glad to see you all are back install.... Working on them old rigs. Great video.

I very much enjoy watching a Father and Son working together. Never had that kind of relationship with my dad. Cherish what you have and keep creating this motivational content. ☺️ Those Broncos are worth weight in gold now. Get her sorted out, cleaned and you have a great hunting truck.

I got 79 bronco... 80's isn't bad, but you got get one from down south, up north they rotted out bad. do like the standard, but mine has automatic. Nice revival. sometime the spring rots away inside those hubs. I have the same problem. After many months of research come to the conclusion. that I found fairly inexpensive replacements. that it's my future/

HAPPY Sunday REV with GOD'S HELP YOU ALWAYS MAKE IT WORK LOL FATHER IS HAPPY

them old fords are just resting and waiting for you to find them!!!luv them old fords!!!

Love an old Bronco!

Watching this video reminds me of my high school days when my brother in law bought a 78 Ford Bronco with a 351 w V8 with a 6 inch lift on 44 inch super swappers gosh I miss that old thing :(

Thank you for your APPRECIATION to your subscribers David

Hello my friend always glad to see you and your wonderful family God Bless 💟💟💟💟

Reminds me of that Bronco in that "Romancing the stone" Movie!!!!

I have always posted in will it run video's that the starter way is the best way to unstick a engine, and some of the well known you tuber's said how wrong it was to do it that way, and I just want to tell them that I'm old and this is not my first rodeo!! New it would work for you. Tell your pop's I'm his number one fan.

@RevStoration

Жыл бұрын

All it will potentially is the starter but when it works it is sweet. Thanks for watching!

Stuck between a rock and two Wheelers LOL I'd have thought that was a give er up job. WOW great job.

I too have an Edsel Ranger, 1959 w/87,191 miles. It’s been a fun project

Hey Rev and Ole man great job getting this old girl back on the road! Maybe Moose was your lucky mascot 😊. Nice to see Momma Wheeler joining you guys and enjoying a ride in this old girl.I hope? ☺️

That is awesome you got it unstuck .

@RevStoration

Жыл бұрын

She is alive.

I bought a similar one, locked tight, and found two rod caps swapped. I put them back where they belonged and it ran great.

1984 Ford Bronco we had them downunder 351c thrmoquad 4 barrel or a 250 inline 6 biggest problem wid em was rust. good ones are pullin big dollars in OZLAND NOW. Always liked them ole Henry's. thank rev and your Dad .

The seats are nice and the motor runs good so go ahead and buy a ignition and a coil plastic do hicky. Suprised it runs so good. Bleed the clutch more. It a runner I was very suprised. But Moma said it was still JUNK LOL Neds new floor mats so it will look better. And a Macco paint job.

Next Stuck engineering give vinager a try. Works better than anything I’ve seen yet

@RevStoration

Жыл бұрын

I have used vinegar too but it does not lube up the cylinder walls. Breaks up the rust though..

Hey buddy good to see y'all hope you an family are doing great see y'all soon still no court yet

we need some more videos of the other bronco!!!! Hope you all are doing good !

Hi Rev! California high desert preacher here! God bless you and you're s.

Had to laugh at your comment, being stuck like a rock like a Chevy, but I notice the Chevy was the one pulling the Ford home. Lol. “Ole man” has some good taste, still. Love them OBS GM trucks as well!

@RevStoration

Жыл бұрын

I do too but I love poking fun at the Chevrolet! All in good fun!

@3BlueTrucks

Жыл бұрын

@@RevStoration love watching the episodes! Need to see more on JC’s truck, though. My boys’ got a similar 90 F150 we’ve been working on.

I gad you and the old man back. You and the old man working together make happy to watch your show. I hope you and the old man keep working together on them old cars. God bless you and your family.

I have a bronco like Nikki T has the same year. Beautiful year for the bronco was the 80's mid's 90's. Ole Man got a beautiful bronco there. I like the charger rims from duke's of Hazzard car. Can't wait for new videos from you and the ole man, family. I like and would like one of the shirts you wearing.

Y'all looked like y'all had fun with that ol bronco and your mom still said it is junk...🤣🤣🤣 I cried laughing

Way to go Rev. Great to see you guys again. Another great video and buy on the Bronco. I love those old full size Bronco's. Can't wait to see the other purchase. Even though I heard what the Ole Man said. Lol. God Bless all of you. Speaking of Bronco's. What's the latest on Bishop The Bronco. Nikki T's ride.

Good Lord, what a FORD! someday you will treasure these videos! Thank You!

Should’ve got a Chevrolet Lol Love your videos and the Ol man makes it very interesting with his way of accomplishing the things he gets done

@jessematthew5988

Жыл бұрын

Glad you got your mom on camera nice to see your whole family involved and please don’t pick on Chevy

@RevStoration

Жыл бұрын

All in good fun.. laugh because that is all I'm doing..

Love watching y'all like I said ur old Man reminds me of mine God bless you

Good Lord Almighty...! My favorite KZreadrs. Always love to see y’all & your videos. Blessings from Jerome & family in California.

You and your father really should be wearing your seat belts. It sets the right example (especially with a son learning to drive) and it's the law.

@RevStoration

Жыл бұрын

If it had some I would.. probably need brakes, working head lights, turn signal, and alot of other stuff. We drove a total of 1.5 miles in a circle on a dirt road miles away from traffic. Not setting a bad example just having fun.. Thanks for watching!

@stephenwillies2420

Жыл бұрын

@@RevStoration I was referring to the Old Man's Chevrolet.

Crazy ole ma. I love it hes a kid at heart he likes ripping that rig very cool nickki t will be upset hers it alittle problems. The ole man is a good ole boy still 💯💯👍👍✌✌

Nice job gentlemen! Those 80-86 were the nicest bull noses of all.

Man i love it! I had a 83 bronco a few years back, it was a 300 inline 6 with the 4 speed. yall sure makin me wish i had it back right about now! lol great video!

Y'all should try watching mortske repair. He's got a couple of special tools he uses to turn stuck engines. One he made himself that you could make too so you don't have to worry about breaking the crank bolt.

I always enjoy visiting with y'all!!!

A chevy pulling a Ford. Being a chevy man I'm loving it,lol. I like old ford's too though.

@RevStoration

Жыл бұрын

The Ole Man was quick to tell me about it too! Thanks for watching!

@locotrucker46

Жыл бұрын

@@RevStoration I always look forward to new videos from yall.

I'm gonna disagree with your Mamma, that Bronco has a ton of potential! I want to see some content on this one, and yours David. The more Bronco's the better, lol

Yeah Rev that's a good job y'all did with that truck man your mom is funny she said that's still a piece of junk but she rode in it anyway waiting on the next video bro

I loved mama saying it's still a PIECE of junk. Love your channel from way out west here in Oregon.

Great recovery. Great information. Old man don't cut no slack!!! Great driver. Lol. Blessings. 😅

I'm sorry Rev, I couldn't help myself. I had to go back and see what Pops said when he was referring to the car that he's wanted to pick up, but I'll keep it to myself because it'll be fun to see her.

@RevStoration

Жыл бұрын

He is looking forward to working on it!

Glad you got engine unstuck and running! Glad clutch is also not stuck and working and 4x4 also works! Must have locking axles since all 4 wheels spin! Looks like à good runner for winter! Take care!

I miss my 64 comet,. Ty for the content.

@RevStoration

Жыл бұрын

Thanks for watching!

Pull the distributor and get a oil pump priming tool on a drill, that'll show you if the oil pump works..

Hey y'all thank you for the video and I think the old man got his self a good truck see that marble mystery oil always works I'm happy for him and I think that that truck was flooded

That just makes me excited to see next week's video now.

From another old man good job on getting unstuck and running.

Awesome bronco has the clutch in it better than the automatic transmission runs good rev and the old man

STUCK engine, stick shift, put in high gear after lubing cylinders, Rock back and forth !

Glad ya'll got it running

Well done, fellers... 👍

You know a lot of folks use vinegar to sit in the cylinders to break up rust , but i have seen CLR put in the cylinders to do a better job . thays what i would put in them before pulling heads . Let set for a week drain the oil , put 30 hd (a good high detergent oil) put Marvel on the rockers let soak valves and try the starter .

Had an 84 with a 300 in it , loved that rig , till my son got hit and demolished it

Great job guys

Can’t kill them old fords, might need a little time every now and again but 302’s were awesome, hoping someday to have an old bull nose f-150 and bronco or a bull nose f-150 and a 65-66 mustang

Good Job Guys, Good to see your mom 👍

Mrs Cheryl said that's a piece of JUNK! LOL!

Excellent video Rev :) , Old Man :) get that 1984 Ford Bronco 1 and need get Key ignition switch fix on plus hood on ready to 4×4 at trails and lots fun times too! I have friend of mine had 1978 Ford Bronco with 460 Lincoln 4 barrel carb also daul exhaust, 4speed Overdrive Automatic transmission with Shift Kit and 411 rears ends gear plus 3/4 ton with 33 wheels Mikey Thompsons on !

grats on finding a diamond in the rough. I'd change that oil and filter one more time now that its got some heat in it and mixed well.

See how smart “the old man” is. Didn’t nobody have to tell him to drop that hot screwdriver. 😊

@RevStoration

Жыл бұрын

Quick.. Still got it in his advanced age!

@BillHilly169

Жыл бұрын

@@RevStoration love you guys! Great content as always and good Lord what a FORD!!

Pastor David, your dad is a wise man. Any man that carries channel locks in hi pocket is a wise man

That's pretty funny you don't have enough cars to work on so you bought two more lol Well for an engine that was stuck to an engine that was running and driving and working in 4 wd and 2 wd you will need that in the snow coming. Great video thanks for sharing.

Don't worry Old Man next week I'll send you another screw driver set . But no welding with them this time lol

Looks pretty good! Your lil lady is going to be upset here isn’t going…

Great video glad you posted keep them coming thanks

That back lid will come off and give you full size bed or just a cool beach style. Oh wait it's not a GMC Jimmy, too bad.

@RevStoration

Жыл бұрын

It will come off.. Little difficult and heavy but it can come.off.

@CoIoneIPanic

Жыл бұрын

@@RevStoration nice rig.

Glad to see that you got the bullnose bronco running and the t-shirts are cool. I have a 1986 bullnose F150 with a 302 high performance engine in it and I love my truck. It is a 4x4 with 6"lift. I have several bullnose trucks t-shirts myself too. Lol

Hi that truck look still perfect

Now I like them old big broncos just around here they don't have floorboards or packed full of Bondo because everyone that had them had to go mudding always and they just rotted away

Really enjoyed this video, keep the videos coming and take care of mom and the old man ! Hilarious made my day! 🙏🇺🇸👍😂

That motor sounds great, I knew you could get it going

Keep it coming REV love it

Like your mama said, it's a piece of crap but now it's a running driving four-wheel drive piece of crap 😂 great job guys and keep up the good work. I enjoy what you all are doing 👍✌️🇺🇲

@RevStoration

Жыл бұрын

Amen.. she agrees

One word perseverance 👍

Good job folks !!

Fun times 😄 Lee

Man that's a nice looking ride

Wow an early RevStoration video yeah

Congratulations, VERY good job! As good as any professional mechanic can do.

I so enjoy your channel you bring a smile to my face, God Bless.

Hello again very nice work you guys always have fun with u too thanks 👍 o Hello mom very nice to see you old man ok always but you know love you always Lee

Enjoyed this video.

The seats look in good condition.

Good to see that you got it running. Did you ever get a hood for it? I hope. Those old Ford's don't want to die!

You could pour some disel in it and the add some cheap oil in let it sit and try to turn it over .

Niki tee might want this one

great great episode,you guys are awesome 👍 God bless