I worked as a Manager of an Auto Parts Store in the late 1970s - Chino Calif - I had a Customer who always did Engine Swaps, and he grew tired of putting 350s in S-10s - He wanted to show the kiddies what a REAL Swap was! Yuuuup, 454 in a S-10
@justinjacobs19
2 жыл бұрын
S-10s didn't come out until 82
@garrysshelton
2 жыл бұрын
@@justinjacobs19 My bad, it was 1981 - Close enough after 40+ years - LOL
@Anarchy-Is-Liberty
Жыл бұрын
@@garrysshelton They still didn't come out until 1982!!! ROFLMFAO!!!
@garrysshelton
Жыл бұрын
@@Anarchy-Is-Liberty 1979 or 1982 - Is your poking fun at me so important you laugh at a Brain Fart after some 40 Years?
@johnparrish92155 жыл бұрын
That big Ford Super Duty was glad to see you leave, it was afraid of the Puppy Truck.................LOL
@Anarchy-Is-Liberty
Жыл бұрын
I was going to put a built 460 Ford in my S10 just to piss the Chevy guys off!! LOL!!
@backyardbuilttrucks110 жыл бұрын
Nice job on rat motor install and backhalf . Looks nice
@Burnwell1on18 жыл бұрын
looks good in reverse...good job👌
@kyletesene14147 жыл бұрын
Nice build. Good attn to detail. Pro Streets where it's at. Fixin to drop an 8-71 blown 454 in my 92 S-10. should be fun.☠
@jekinneys Жыл бұрын
My only complaint and not mush you can to is the exhaust is so restrictive do to room. But love building s10's!!! Great stuff!
@ericharak762610 жыл бұрын
Bad ass truck can't wait to build one of my own
@caps428
9 жыл бұрын
Right this is my dream car lol
@ronnielewis26447 жыл бұрын
love your truck. I'd sure love to make a pass in it. luv Chevy
@kathymartinichio22409 жыл бұрын
Just like my guy.. with 427 in his S-10.
@skateboardingprogression6008
5 жыл бұрын
Kathy Martinichio acually 454
@Anarchy-Is-Liberty
Жыл бұрын
@@skateboardingprogression6008 Maybe her guy has a 427 in his.
@overspray60577 жыл бұрын
That's crazy man!
@leonardtribble247510 жыл бұрын
killer truck man.... perfect stance..
@Tennie1123
10 жыл бұрын
Hubby says Thanks!!!
@Anarchy-Is-Liberty Жыл бұрын
"it looks giant" - ROFLMFAO!!! Was going to say, that's what she said, but that IS actually what she said!!! LOL!!
@onthemicwithtarencebaileys56847 жыл бұрын
I found a 454 for $500 about to send it out to be redone and taken out to a 502. plan to put twin turbos on it and put it in my 73 nova in a couple years. I'm currently installing a 408 now
@rmcguire4218 жыл бұрын
nice work.. a lot of hours to make these rides happen, i have a 87 grand prix in progress
@4x4lonestarstateliftedlife36 жыл бұрын
Please tell me that the little roll bar in front of the rear window is not all you have to protect you in a rollover accident. Other than that it is one heck of a truck. Beautiful work of art, it really is.
@1BlubeTube9 жыл бұрын
Nice Truck
@buckster25758 жыл бұрын
sweet you live in VA to.
@damianchandler74128 жыл бұрын
nice ride man!!
@RobertSiwik19683 жыл бұрын
Nice truck!
@91sierra110 жыл бұрын
nice s10....what kind of headers/motor mounts combo did you use???
@mattm38434 жыл бұрын
I dont get why all these big block s10s sound so mild with a big block they dont sound aggressive
@nivesknight3 жыл бұрын
How long was the build? I am thinking about doing something similar. Any advice would be greatly appreciated. I have to do it on the cheaper side. Still worth doing.
@ajdthewheel76179 жыл бұрын
Nice truck my dad had the same year with a 406 stroker did about 9:15 in a quarter
@jonharrington9545
7 жыл бұрын
AJD@the wheel ah ok
@Anarchy-Is-Liberty
Жыл бұрын
406 stroker? 9:15 in the quarter is flyin'!!
@dcole8088 жыл бұрын
nice S10!!!!
@damonbar692 жыл бұрын
It’s a squeeze to fit a 350 in a s10… couldn’t imagine the fab work and everything to do to fit a big block 😳
@Anarchy-Is-Liberty
Жыл бұрын
Headers and steering are the biggest issues, nothing that can't be taken care of with a little ingenuity.
@trentspight3027 Жыл бұрын
What all you have too do to put the big block in the s-10 .
@crystalmcintyre903510 жыл бұрын
What part of VA are you guys in? Custom headers? A friend of mine is building a 454 s10 and said he couldn't find production headers anywhere.
@brokenmedic91336 жыл бұрын
Lol. I had a back halved s-10 blazer with a 454 and every time someone asked what motor I had, I told them it was a hybrid. The WTF faces of the ppl that believed my was hilarious. That did get old tho, goin to get gas turned into a 2 hour trip. Should have just left the hood off.
@TiaShaw.10 жыл бұрын
awesome
@doyletarver54738 жыл бұрын
What kind of headers do you have on your truck
@chrischamberlain74168 жыл бұрын
he scattered of it
@mr.briangates21527 жыл бұрын
Did you have to modify the steering shaft?
@maniacal-s106 жыл бұрын
Grate sound and looks grate! I have a '89s10 that I am putting a 414big block w/ glide and a 4.11 or 4.30 gear. The bully jegs/ summit/autozone. How do I get intouch please?
@Anarchy-Is-Liberty
Жыл бұрын
Looks like an S10 to me, not a grate!!
@jamesallen5008 жыл бұрын
nice!!
@Tennie1123
8 жыл бұрын
+jay galloway Tim says Thanks!
@illduitmyself7 жыл бұрын
very cute
@350toocute8 жыл бұрын
Gotta love it..No rice burner can compete up against American anyday.
@WickedG5150
6 жыл бұрын
350toocute lol. Are you kidding?
@4x4lonestarstateliftedlife3
6 жыл бұрын
350toocute I am all for American muscle but a lot of imports also have some serious muscle. I have seen many of big and small blocks beat by four and six bangers.
@terrypresnell7874
5 жыл бұрын
@@4x4lonestarstateliftedlife3 no replacement for displacement in the end cubic inches will always dominate
@quintonschmidt5763
5 жыл бұрын
@@terrypresnell7874 tell that to guys running 4g63 2.0 litre engies with big old turbos making 1200 all day long while getting 22mpg... it's not 1969 anymore hahah
@terrypresnell7874
5 жыл бұрын
@@quintonschmidt5763 how about big blocks with turbos making 3000hp
@curtishanlon17812 жыл бұрын
What headers did you use?
@dalebarany46457 жыл бұрын
what kind of headers do you have on that
@AlexS-nw7yo2 ай бұрын
What headers u use??
@ROTAXD8 жыл бұрын
Love the big block. Hate the fact that it's tubbed and has pizza cutters up front. Love to see it with coulovers & a 4 link out vack with some 88-90 Iroc wheels all the way around or even with some chevy steel rally wheels. Nice build though.
@jonharrington9545
7 жыл бұрын
ROTAXD it would schred anything smaller
@carter123cbq
6 жыл бұрын
Lmao. Hate the fact that it’s tubbed? You’d never be able to hook anywhere with fuckin stock size shit on there bud
@loganperry8348
5 жыл бұрын
ive got a 95 s10 with a decently built 305 with some iroc rims and a 295-50-16 tire and the rims look great on the truck
@corybeckmann88237 жыл бұрын
That thing sounds so god damn healthy.
@pl7479 жыл бұрын
Noticed you had cast iron exhaust manifolds on it once. What year/model did they come off of?
@Tennie1123
9 жыл бұрын
Junk Yard 69-72 big block Chevy - still have them
@pl747
9 жыл бұрын
Tennie1123 I was curious what model they come off of. I have some from 73 or 74 One ton truck and some from 67 Chevelle SS and they are different from each other.
@mitchellmusgrove630210 жыл бұрын
i got same build and need to kn what kinda headers them are???
@gottago9063
4 жыл бұрын
Metal ones lmao
@Anarchy-Is-Liberty
Жыл бұрын
The kind that work!!
@maniacal-s106 жыл бұрын
Sounds grate guy. KZread the bully jegs/summit/autozone. My girlfriend and I are putting a BBC 414 tunnelram with 2 4s and a pg with a 1.76 and a gm corporate 4.11.
@slimelines43947 жыл бұрын
Lol what does that cage cert' to 14.6
@ohancientone52508 жыл бұрын
how much power?
@maniacal-s105 жыл бұрын
Hey to whom this may concern. Great '84 s10 with a 454 "How sweet it is". 700r4 or? and diff 7.5 or? Please check out my '89 (maniacal s10) 21 vids thanks and Happy Holidays to every 1! Mike.
@tintdr3 жыл бұрын
Is it for sale yet?
@ccopher795 жыл бұрын
What headers did you use for your build
@Tennie1123
5 жыл бұрын
Hi, My husband is out of town right now. When he gets back in a couple days I will ask.
@Anarchy-Is-Liberty
Жыл бұрын
@@Tennie1123 It's been 3 years now, that's a long GD trip!!! ROFLMFAO!!
@kristenmiller61467 жыл бұрын
that rear end.i need that
@Anarchy-Is-Liberty
Жыл бұрын
Yes you do!!
@jamesbruce56619 жыл бұрын
I went to sleep .....does it do anything besides back out the drive and go back in the driveway. ...let's see that thing twerk one time
@4x4lonestarstateliftedlife3
6 жыл бұрын
James Bruce you had me rolling on this comment. 👍 Like crank the stall up and mat the throttle already. The beast needs to be unleashed now and then.
Пікірлер: 100
Love s10s timeless classic lines
I worked as a Manager of an Auto Parts Store in the late 1970s - Chino Calif - I had a Customer who always did Engine Swaps, and he grew tired of putting 350s in S-10s - He wanted to show the kiddies what a REAL Swap was! Yuuuup, 454 in a S-10
@justinjacobs19
2 жыл бұрын
S-10s didn't come out until 82
@garrysshelton
2 жыл бұрын
@@justinjacobs19 My bad, it was 1981 - Close enough after 40+ years - LOL
@Anarchy-Is-Liberty
Жыл бұрын
@@garrysshelton They still didn't come out until 1982!!! ROFLMFAO!!!
@garrysshelton
Жыл бұрын
@@Anarchy-Is-Liberty 1979 or 1982 - Is your poking fun at me so important you laugh at a Brain Fart after some 40 Years?
That big Ford Super Duty was glad to see you leave, it was afraid of the Puppy Truck.................LOL
@Anarchy-Is-Liberty
Жыл бұрын
I was going to put a built 460 Ford in my S10 just to piss the Chevy guys off!! LOL!!
Nice job on rat motor install and backhalf . Looks nice
looks good in reverse...good job👌
Nice build. Good attn to detail. Pro Streets where it's at. Fixin to drop an 8-71 blown 454 in my 92 S-10. should be fun.☠
My only complaint and not mush you can to is the exhaust is so restrictive do to room. But love building s10's!!! Great stuff!
Bad ass truck can't wait to build one of my own
@caps428
9 жыл бұрын
Right this is my dream car lol
love your truck. I'd sure love to make a pass in it. luv Chevy
Just like my guy.. with 427 in his S-10.
@skateboardingprogression6008
5 жыл бұрын
Kathy Martinichio acually 454
@Anarchy-Is-Liberty
Жыл бұрын
@@skateboardingprogression6008 Maybe her guy has a 427 in his.
That's crazy man!
killer truck man.... perfect stance..
@Tennie1123
10 жыл бұрын
Hubby says Thanks!!!
"it looks giant" - ROFLMFAO!!! Was going to say, that's what she said, but that IS actually what she said!!! LOL!!
I found a 454 for $500 about to send it out to be redone and taken out to a 502. plan to put twin turbos on it and put it in my 73 nova in a couple years. I'm currently installing a 408 now
nice work.. a lot of hours to make these rides happen, i have a 87 grand prix in progress
Please tell me that the little roll bar in front of the rear window is not all you have to protect you in a rollover accident. Other than that it is one heck of a truck. Beautiful work of art, it really is.
Nice Truck
sweet you live in VA to.
nice ride man!!
Nice truck!
nice s10....what kind of headers/motor mounts combo did you use???
I dont get why all these big block s10s sound so mild with a big block they dont sound aggressive
How long was the build? I am thinking about doing something similar. Any advice would be greatly appreciated. I have to do it on the cheaper side. Still worth doing.
Nice truck my dad had the same year with a 406 stroker did about 9:15 in a quarter
@jonharrington9545
7 жыл бұрын
AJD@the wheel ah ok
@Anarchy-Is-Liberty
Жыл бұрын
406 stroker? 9:15 in the quarter is flyin'!!
nice S10!!!!
It’s a squeeze to fit a 350 in a s10… couldn’t imagine the fab work and everything to do to fit a big block 😳
@Anarchy-Is-Liberty
Жыл бұрын
Headers and steering are the biggest issues, nothing that can't be taken care of with a little ingenuity.
What all you have too do to put the big block in the s-10 .
What part of VA are you guys in? Custom headers? A friend of mine is building a 454 s10 and said he couldn't find production headers anywhere.
Lol. I had a back halved s-10 blazer with a 454 and every time someone asked what motor I had, I told them it was a hybrid. The WTF faces of the ppl that believed my was hilarious. That did get old tho, goin to get gas turned into a 2 hour trip. Should have just left the hood off.
awesome
What kind of headers do you have on your truck
he scattered of it
Did you have to modify the steering shaft?
Grate sound and looks grate! I have a '89s10 that I am putting a 414big block w/ glide and a 4.11 or 4.30 gear. The bully jegs/ summit/autozone. How do I get intouch please?
@Anarchy-Is-Liberty
Жыл бұрын
Looks like an S10 to me, not a grate!!
nice!!
@Tennie1123
8 жыл бұрын
+jay galloway Tim says Thanks!
very cute
Gotta love it..No rice burner can compete up against American anyday.
@WickedG5150
6 жыл бұрын
350toocute lol. Are you kidding?
@4x4lonestarstateliftedlife3
6 жыл бұрын
350toocute I am all for American muscle but a lot of imports also have some serious muscle. I have seen many of big and small blocks beat by four and six bangers.
@terrypresnell7874
5 жыл бұрын
@@4x4lonestarstateliftedlife3 no replacement for displacement in the end cubic inches will always dominate
@quintonschmidt5763
5 жыл бұрын
@@terrypresnell7874 tell that to guys running 4g63 2.0 litre engies with big old turbos making 1200 all day long while getting 22mpg... it's not 1969 anymore hahah
@terrypresnell7874
5 жыл бұрын
@@quintonschmidt5763 how about big blocks with turbos making 3000hp
What headers did you use?
what kind of headers do you have on that
What headers u use??
Love the big block. Hate the fact that it's tubbed and has pizza cutters up front. Love to see it with coulovers & a 4 link out vack with some 88-90 Iroc wheels all the way around or even with some chevy steel rally wheels. Nice build though.
@jonharrington9545
7 жыл бұрын
ROTAXD it would schred anything smaller
@carter123cbq
6 жыл бұрын
Lmao. Hate the fact that it’s tubbed? You’d never be able to hook anywhere with fuckin stock size shit on there bud
@loganperry8348
5 жыл бұрын
ive got a 95 s10 with a decently built 305 with some iroc rims and a 295-50-16 tire and the rims look great on the truck
That thing sounds so god damn healthy.
Noticed you had cast iron exhaust manifolds on it once. What year/model did they come off of?
@Tennie1123
9 жыл бұрын
Junk Yard 69-72 big block Chevy - still have them
@pl747
9 жыл бұрын
Tennie1123 I was curious what model they come off of. I have some from 73 or 74 One ton truck and some from 67 Chevelle SS and they are different from each other.
i got same build and need to kn what kinda headers them are???
@gottago9063
4 жыл бұрын
Metal ones lmao
@Anarchy-Is-Liberty
Жыл бұрын
The kind that work!!
Sounds grate guy. KZread the bully jegs/summit/autozone. My girlfriend and I are putting a BBC 414 tunnelram with 2 4s and a pg with a 1.76 and a gm corporate 4.11.
Lol what does that cage cert' to 14.6
how much power?
Hey to whom this may concern. Great '84 s10 with a 454 "How sweet it is". 700r4 or? and diff 7.5 or? Please check out my '89 (maniacal s10) 21 vids thanks and Happy Holidays to every 1! Mike.
Is it for sale yet?
What headers did you use for your build
@Tennie1123
5 жыл бұрын
Hi, My husband is out of town right now. When he gets back in a couple days I will ask.
@Anarchy-Is-Liberty
Жыл бұрын
@@Tennie1123 It's been 3 years now, that's a long GD trip!!! ROFLMFAO!!
that rear end.i need that
@Anarchy-Is-Liberty
Жыл бұрын
Yes you do!!
I went to sleep .....does it do anything besides back out the drive and go back in the driveway. ...let's see that thing twerk one time
@4x4lonestarstateliftedlife3
6 жыл бұрын
James Bruce you had me rolling on this comment. 👍 Like crank the stall up and mat the throttle already. The beast needs to be unleashed now and then.
4min 32 seconds of damn nice truck and no action.
What headers
@Tennie1123
4 жыл бұрын
My husband told me he hand made them.
wheres the burnout????
@Tennie1123
9 жыл бұрын
agcrx33 kzread.info/dash/bejne/oa2lmsacdK6dntY.html
@ADN1996
6 жыл бұрын
with those tires im not even sure it will do a burnout. probably just go lol
Thought my sbc was a tight fit
@Anarchy-Is-Liberty
Жыл бұрын
We ain't tappin' virgins around here, we got work to do!!!
You. Had to use a shoehorn I'm sure
@Tennie1123
6 жыл бұрын
Glenn Manchester My husband loves that truck.
@glennmanchester1568
6 жыл бұрын
Tennie1123 I'm sure he does I sure would
-7500 FPS
sweet you live in VA to.
I went to sleep .....does it do anything besides back out the drive and go back in the driveway. ...let's see that thing twerk one time