1980-86 Ford F-Series EGR

This video shows you how to remove and install an EGR on a 1982 Ford F-250 Truck (4.9L 300cid L6). This EGR installation should be the same for all F-Series Pick-Up Truck models between 80-86.
Hope this video helps you!
Please give me a "thumbs up" and feel free to leave a comment if you wish. Also, please subscribe to my channel if you would like to see other similar video's.
Thanks for watching BryzGarage, and...
Have a Great Day!!!
Intro Music by: Nine Inch Nails - Only (Richard X Remix)

Пікірлер: 52

  • @garymahon1955
    @garymahon1955 Жыл бұрын

    Thank you Bry. Helpfull video. I know all about working on my vehicles in the snow and cold. ! Im 68yo, and never had a garage ! I have my late dad;s 83 F150, and my brothers did a lot of work on it, and they must have removed the EGR , as it has none on it., I guess it has done ok for many yrs without one.

  • @ThereIsNoGodOnlyUs
    @ThereIsNoGodOnlyUs5 жыл бұрын

    These vids on the inline 6 are way more helpful than some of the others out there. I hope you get a lot more subscribers, man, you totally deserve the support.

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    Hey thanx Joey, I really appreciate it!! I'm just really trying to help people that come across the same issues as me and have no where to turn to.

  • @tonyfourpaws4511

    @tonyfourpaws4511

    4 жыл бұрын

    @@bryzgarage5028 great vid! I'm new to all this and have a question. O the top right hand of your carb there is a nipple that looks like a vacuum port with nothing attached. What is that for? Thank you

  • @bryzgarage5028

    @bryzgarage5028

    4 жыл бұрын

    @@tonyfourpaws4511 can you please rewatch it and give me the exact time in your video that you see it. That will help me try to tell you what it is. Thanx

  • @JoseRodriguez-nl7no

    @JoseRodriguez-nl7no

    4 жыл бұрын

    BryzGarage you have a video how to tune the carb?

  • @garymahon1955
    @garymahon19552 жыл бұрын

    Very helpful to me. Good job!

  • @STOICDevelopmentcenterofEARTH
    @STOICDevelopmentcenterofEARTH6 жыл бұрын

    I subscribed bro! Really looking forward to more

  • @davejones2741
    @davejones27412 жыл бұрын

    I got rid of all that vaccum line stuff including that crap under the carb and the carb ! Why don't you get a new intake manifold ,I did offenhouser makes one for the inline 6 set up for a 4 barrel put an adapter on it for a stock 2barrel it will run great

  • @mikeplatero2774
    @mikeplatero27744 жыл бұрын

    Thanks for the video. My truck stalled yesterday. I have a feeling this part needs to be changed out as well. My truck has a stalling issue from use to time.. it will turn and turn when trying to start. I need to change out my fuel filter and spark plugs as well.

  • @bryzgarage5028

    @bryzgarage5028

    4 жыл бұрын

    You'll have to let us know how it goes after you change it

  • @aaronrainey788
    @aaronrainey7883 жыл бұрын

    Great video! I'm planning to also change this valve out on my 1983 F-150. Wish me luck.

  • @Redbody77

    @Redbody77

    4 ай бұрын

    How did it go

  • @whitecat3131
    @whitecat3131 Жыл бұрын

    Come to the video and I hear NIN ONLY Richard X version and I am like

  • @guillermonieri4203
    @guillermonieri42032 жыл бұрын

    Thank you.

  • @michaelgilmore3038
    @michaelgilmore303811 ай бұрын

    What could have been said is ... Where does a EGR vacuum line connect to .... My case is most of the Emissions stuff has been removed as the state of GEORGIA will EXEMPT Emissions Test at 25 Years and Older Vehicles

  • @sternstones4871
    @sternstones48715 жыл бұрын

    you helped me a lot with this. my truck dies when i get on the brakes. i think this is my issue.

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    Sweet, thank you for the comment

  • @fordinlinestraight
    @fordinlinestraight6 жыл бұрын

    Great job im kind of in same process. I see we have the same carb. Yfa 1 barrel great choice . Were your spark plugs fouling before you changed the egr valve? Subscribed

  • @bryzgarage5028

    @bryzgarage5028

    6 жыл бұрын

    ford 300 inline straight 6 hi Ford. Good luck with everything. No, my spark plugs were fine. I just chose to change them because I was unsure when they had been changed last.

  • @neillsouthwick8444
    @neillsouthwick8444 Жыл бұрын

    Great video. I bought my F250 new in 1981 and still use it frequently. It has the 300 inline 6 like yours. I have a very annoying whistle when it warms up and it varies with the amount of throttle I give it when I'm going down the road. At idle it never makes a sound. The two mechanics I had look at it can't come up with an answer. It Drives me nuts when I'm driving it. I stop at a traffic light and the noise stops regardless of the amount of throttle I give it. I'm hoping it might be the EGR valve, what are your thoughts on that? I've never changed the valve. The truck has less than 200K on it so for a 41 year old truck it's quite low. Thanks for any suggestions you may offer. Thanks, Neill

  • @Dace1314
    @Dace13144 жыл бұрын

    Great video! Quick question for you please, what is that circular tube for that goes downwards from the air inlet duct? I've got a similar truck that I'm working on and my tube is all cracked and busted and I'm trying to figure out what its function is. Thanks for your time!

  • @mchl8

    @mchl8

    3 жыл бұрын

    It is a stove pipe, this allows warm air off the exhaust side to recirculate back to fresh air. It is for the colder areas to burn fuel properly. No matter if you have done away with the emissions crap you should keep this. It does help I just rebuilt a 4.9.

  • @omarsoto1261
    @omarsoto12613 жыл бұрын

    The vacuum line on the back of the egr valve where does it go connected to?

  • @aaronmortimore8303
    @aaronmortimore8303 Жыл бұрын

    E. G. R

  • @kylekenan2321
    @kylekenan23212 жыл бұрын

    What are the diaphragms under the alternator? Also, what's the little box up by the headlight and radiator with the two caps?

  • @andresbabyboys1560
    @andresbabyboys15603 жыл бұрын

    Where are you changing the egr valve, in front of it is a motor with this pulley, what is it for?

  • @braydonhorton2909
    @braydonhorton2909Ай бұрын

    What is the hose thats connected to the EGR spacer/ mount on the right side?

  • @whitecat3131
    @whitecat3131 Жыл бұрын

    So the EGR valve for the 1986 Ford F 150 5.0 engine looks different. It appears to be more like the 1987 and later models.

  • @ryan199426
    @ryan1994265 жыл бұрын

    What is the part called the valve is connected to ive looked up egr and everything onlone amd no luck i need to completely replace it in my 1981 f100 i have the same engine

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    I'd need to see a picture of the area you are talking about, sorry.

  • @jaunmendez2882
    @jaunmendez28824 жыл бұрын

    Hey is there anyway I could contact you? because my 84f150 inline 6 is making a weird noise and I can’t figure out what it is

  • @fordinlinestraight
    @fordinlinestraight5 жыл бұрын

    Hi where is the egr valve "vacuum line plugged into? And and also on the smog pump there's another device a little smaller than a coke can it has a vacuum line where does this plug in to?

  • @Flint-Dibble-the-Don

    @Flint-Dibble-the-Don

    5 жыл бұрын

    Did you ever figure it out? Currently looking as well.

  • @fordinlinestraight

    @fordinlinestraight

    5 жыл бұрын

    @@Flint-Dibble-the-Don no but with research I believe it ties in to the themomatic plug on the water pump. Once the reaches a peak it opens the vacuum to open the egr. Complicated but I'm eger to learn as much as I can. Cheers

  • @bryzgarage5028

    @bryzgarage5028

    4 жыл бұрын

    Fyi...a vacuum routing video has finally been posted

  • @Reesetrain44
    @Reesetrain443 жыл бұрын

    why do i hear Round and Round by Ratt also this may as well be one of many pieces of the engine i may have to replace for my van to run better

  • @bryzgarage5028

    @bryzgarage5028

    3 жыл бұрын

    Lol..that's the funniest comment I've got so far...touche my friend!

  • @jaycantrell9238
    @jaycantrell92385 жыл бұрын

    Do you still have this pickup?? Is there any chance I could get a Vacuum Line Guide? It would help me tons!!

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    Yes I do, and I actually am going to be doing two videos on that. I just haven't had time. I have just bought all my replacement lines in late November, but just haven't put a video together. Hopefully I'll be able to get around to it here shortly.

  • @bryzgarage5028

    @bryzgarage5028

    4 жыл бұрын

    Fyi...a vacuum routing video has finally been posted

  • @aliciasendejo4585
    @aliciasendejo45854 ай бұрын

    Were it cantata to

  • @WubiWatkins
    @WubiWatkins2 жыл бұрын

    anyone got a diagram on vacuum?

  • @bobbypulla
    @bobbypulla2 ай бұрын

    What is the EGR vacuum line connected to

  • @bryzgarage5028

    @bryzgarage5028

    2 ай бұрын

    I can't remember off the top of my head but I have another video showing the hose routing for this truck

  • @ThereIsNoGodOnlyUs
    @ThereIsNoGodOnlyUs5 жыл бұрын

    Would this also apply to an '82 E150 with the same engine?

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    Yes it would

  • @ThereIsNoGodOnlyUs

    @ThereIsNoGodOnlyUs

    5 жыл бұрын

    @@bryzgarage5028 thanks, man.

  • @ThereIsNoGodOnlyUs

    @ThereIsNoGodOnlyUs

    5 жыл бұрын

    What is the valve the pink vacuum hose is connected to near the EGR? It seems mine appears to be missing and the hose is plugged.

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    @@ThereIsNoGodOnlyUs I'll take a look....give me about an hour.

  • @bryzgarage5028

    @bryzgarage5028

    5 жыл бұрын

    @@ThereIsNoGodOnlyUs If you would like, post your email and I can send you some pics. It would be a lot easier for me to explain it with pictures.