The exhaust piping is stock, but the catalytic converter has been hollowed out and the muffler has been removed.
Жүктеу.....
Пікірлер: 24
@Me-eb3wv11 ай бұрын
Better than an electric car
@Its_jack1112 Жыл бұрын
That looks exactly like my mustang I also have the 2.8 v6
@partysodown
Жыл бұрын
The only thing I really don't like about the 2.8 is that it's hard to get parts for em here in the US. I actually finished my 351W swap this summer, so I don't have the 2.8 in it anymore
@micahrlusk
Жыл бұрын
@@partysodown depends how you search, often if you search vehicle specific its hard but they used them in a lot of cars in the US
@epandaman3999
Жыл бұрын
I own the '86 3.8 V6 and some parts are hard to find for it
@91MustangLX Жыл бұрын
Awesome car!! Miss my 1980
@partysodown
Жыл бұрын
Thanks man!
@Choadgang
9 ай бұрын
I have a question so I’m 14 I just bought a 83 fox body I don’t have a lot of money to spend but what did u all do to make it sound like that mine is a v6 as well
@91MustangLX
9 ай бұрын
@Choadgang congrats on your first foxbody! I would say delete the the catalytic converter and then run any open chamber muffler (Flowmaster, magnaflow, thrush, cherry bomb) and use an LX V8 exhaust tip. It will snap and sound snotty. Hope that helps
@michelelovejoy94929 ай бұрын
I have a lx but woth 1967 289 in it with airshocks red intear a radial tites and airshocks
@partysodown
8 ай бұрын
Very cool! I have a 1975 351W in this car now
@michelelovejoy9492
8 ай бұрын
Cool
@Bread_vr574
7 ай бұрын
Also have a giant camshaft and we just need to rebuild the carb and we will be able to driveit btw this my new account
@jamesmacroll98382 жыл бұрын
I wanna see a 3.8 or 4.0 swap on one of these with turbo
@partysodown
2 жыл бұрын
I would have loved to put the 3.7V6 or another V6 and try to make some power, but instead I went the 351w route. Actually, the swap just got finished up this week, so I'll have another exhaust video up pretty soon.
@jaliahlockett81623 жыл бұрын
What did you do for it to pop like that
@partysodown
3 жыл бұрын
I didn't have to do anything. I'd guess something in the carburetor tune was off, but between the carb adjustments and checking the timing it always would backfire. The crackles only happened after the muffler delete, but the car always had an issue with backfiring.
@bradleywise83514 күн бұрын
Sounds like a tractor at first
@AC-lo6wx9 ай бұрын
What exhaust system you running ?
@partysodown
9 ай бұрын
It's the stock mustang exhaust, but the catalytic converter has been hollowed out and the muffler was removed with a length of pipe. I'm not sure what the diameter was.
@AC-lo6wx
9 ай бұрын
@@partysodown perfect thanks
@jaggass10 ай бұрын
Is that the Cologne V6 with 3 exhaust ports?
@partysodown
9 ай бұрын
Yes, the US version of these engines has the 3 separate exhaust ports. The Euro versions had the siamesed ports, which I believe was so they could use the Cologne V4 exhaust manifolds interchangeably.
@jaggass
17 күн бұрын
@@partysodown Over here Ford Europe did a 2.9 Cologne V6 with the more conventional 3 exhaust ports. Makes me wonder if you can put the US 2.8 V6 heads on a European one.
Пікірлер: 24
Better than an electric car
That looks exactly like my mustang I also have the 2.8 v6
@partysodown
Жыл бұрын
The only thing I really don't like about the 2.8 is that it's hard to get parts for em here in the US. I actually finished my 351W swap this summer, so I don't have the 2.8 in it anymore
@micahrlusk
Жыл бұрын
@@partysodown depends how you search, often if you search vehicle specific its hard but they used them in a lot of cars in the US
@epandaman3999
Жыл бұрын
I own the '86 3.8 V6 and some parts are hard to find for it
Awesome car!! Miss my 1980
@partysodown
Жыл бұрын
Thanks man!
@Choadgang
9 ай бұрын
I have a question so I’m 14 I just bought a 83 fox body I don’t have a lot of money to spend but what did u all do to make it sound like that mine is a v6 as well
@91MustangLX
9 ай бұрын
@Choadgang congrats on your first foxbody! I would say delete the the catalytic converter and then run any open chamber muffler (Flowmaster, magnaflow, thrush, cherry bomb) and use an LX V8 exhaust tip. It will snap and sound snotty. Hope that helps
I have a lx but woth 1967 289 in it with airshocks red intear a radial tites and airshocks
@partysodown
8 ай бұрын
Very cool! I have a 1975 351W in this car now
@michelelovejoy9492
8 ай бұрын
Cool
@Bread_vr574
7 ай бұрын
Also have a giant camshaft and we just need to rebuild the carb and we will be able to driveit btw this my new account
I wanna see a 3.8 or 4.0 swap on one of these with turbo
@partysodown
2 жыл бұрын
I would have loved to put the 3.7V6 or another V6 and try to make some power, but instead I went the 351w route. Actually, the swap just got finished up this week, so I'll have another exhaust video up pretty soon.
What did you do for it to pop like that
@partysodown
3 жыл бұрын
I didn't have to do anything. I'd guess something in the carburetor tune was off, but between the carb adjustments and checking the timing it always would backfire. The crackles only happened after the muffler delete, but the car always had an issue with backfiring.
Sounds like a tractor at first
What exhaust system you running ?
@partysodown
9 ай бұрын
It's the stock mustang exhaust, but the catalytic converter has been hollowed out and the muffler was removed with a length of pipe. I'm not sure what the diameter was.
@AC-lo6wx
9 ай бұрын
@@partysodown perfect thanks
Is that the Cologne V6 with 3 exhaust ports?
@partysodown
9 ай бұрын
Yes, the US version of these engines has the 3 separate exhaust ports. The Euro versions had the siamesed ports, which I believe was so they could use the Cologne V4 exhaust manifolds interchangeably.
@jaggass
17 күн бұрын
@@partysodown Over here Ford Europe did a 2.9 Cologne V6 with the more conventional 3 exhaust ports. Makes me wonder if you can put the US 2.8 V6 heads on a European one.