1978 Ford Bronco 7.3L GODZILLA V8 w/ HEADERS & BORLA PRO-XS!
Автокөліктер мен көлік құралдары
WANT A BORLA PRO-XS? CLICK THE LINK BELOW!
amzn.to/478U4u5
WANT LCGP RESONATORS? CLICK THE LINK BELOW!
amzn.to/3RDqfME
WANT A DC SPORTS RESONATED EXHAUST TIP? CLICK THE LINK BELOW!
amzn.to/3viUGjs
*Commission Earned From Associate Links*
1978 Ford Bronco 7.3L GODZILLA V8 w/ HEADERS & BORLA PRO-XS!
#exhaustaddicts #ford #godzilla
0:00 Before: Flo Pro Exhaust
1:15 Undercarriage
4:16 Decibel Reading & Revs
6:52 Interior Sound
7:17 Under The Hood
8:44 Revs w/ Open Cut-Outs
9:12 Drive Off
Located at Discount Mufflers & Custom Exhaust 3560 Dickerson Pike Nashville, TN 37207
Call us for prices and information at 615-612-6244!
Comment below with your thoughts & questions!
Follow us on TIkTok!
@exhaustaddicts
Follow us on Instagram!
@theexhaustaddicts
Subscribe for more awesome car content!
Пікірлер: 211
This is what Ford should be making with the Bronco, 5.0 and the 7.3.
@cesarpalmos8235
6 ай бұрын
They did make a 5.0 Bronco, look it up.
@landis277
6 ай бұрын
@@cesarpalmos8235he probably means the current generation of broncos
@cesarpalmos8235
6 ай бұрын
@@landis277 Exactly, Ford made a specialty 5.0 Coyote Baja Bronco for $300,000. Look up Bronco DR.
@thelevelingxpgam3s483
6 ай бұрын
Screw it then, put a gooseneck on that bronco.
@Joe-hz1nw
6 ай бұрын
Blame half the country that votes for all the crazy EPA garbage.
The owner of this Bronco speaks my language. The year, the engine choice and the build. 👌
Modern engines need a crossover pipe and this right here is the perfect example of why.
The 7.3 fits the bronco like bread and butter
I love the truck, but honestly, the exhaust tone can be better. 100% needs an x pipe or h pipe.
@Terminxman
6 ай бұрын
just needs some flowmaster super 40s or 10s
@SPPTA
6 ай бұрын
Hard to do a true h/x pipe with that transfer case and front drive shaft.
@domtorres6120
6 ай бұрын
I agree it sounds terrible
@whatwasthat3269
5 ай бұрын
needs 8 to 1
@strokinbaby965
Ай бұрын
@@whatwasthat32698 to 1 what? Compression? That's garbage.
I'd be leaving those cut-outs open! That's one amazing rig!!! 🤤
I like the first exhaust,matches better with the overall restoration
Finally, a Bronco restomod that hasn’t been way overdone
It need's a crossover of some sort, and needs to be tuned to fix that surging idle. Otherwise it looks like a super clean swap
@byronlemay2166
6 ай бұрын
Yeah, that engine isn't quite ready for prime time. Whoever installed it still has bugs to work out. I also think the exhaust is obnoxious...needs a crossover pipe to tone it down. Nice toy otherwise.
Whoever edited this video needs a raise 😂😂😂
Absolutely stellar,,, what a beautiful example of an era gone by.. Thanks for doing your part to keep it alive fellas.... GO EXHAUST ATTICKS
He’ll be back, gotta get rid of that fluttery sound. Too many muffling devices. I have two carven tr’s waiting to be installed my 2500 suburban. I’m going 2.5” true duals with the carven tr’s. That Bronco is a Monster tho!
Beautiful car inside and out, the blue is beautiful. Along with it sounding great. Great work!
I would take that tuck over the new ones. Very nice. Excellent move.
I felt so happy to see this car. I think this is the most gorgeous car that i have seen in this channel. Congrats for the good work you did. Big and loud. Thats a real Bronco!!
This is the baddest bronco ever
Best sounding truck you have ever had on the hoist , !
Very well done still loud, but quieter and a better tone
That bronco sounds amazing and Looks amazing wow
Sounds really great with headers and borla pro-xs 💪
That’s a awesome build a perfect Bronco 🔥🔥🔥
My grandpa bought a new 79 with a 400m. It had 30 year old glasspacks on it and sidepipes. My buddy bought it about 10 years ago and restored it with a 12 valve Cummins and a 6 speed
@coreysharp9794
6 ай бұрын
The 400 is not a M. Only the 351
Best looking ford on the channel so far.
I’m not a ford guy, but dam that’s nice. It’s a perfect blend of old school and new.
I like it. Just wish it stuck to chrome exhaust tips.
One of the best things I've ever heard!
sounds good both ways but quieter, it is nice and subtle I like it
That is a work of art!
Nice truck. Love that color.
Sounds so good
Those cut-outs with the Freedom Pedal WFO 😍😍😍
Man that Bronco is great! incredible
Love it. 👊🏻😎🔨Beautiful. Nice work. Sounds great.
7.3 Godzilla motor is the best thing ford made.
Looks amazing sounds amazing! Love it
Dees videos keep getting better 👏
Sounds great, that deep growl is perfect! Great job!
@exhaustaddicts
6 ай бұрын
Thanks a lot!
It sounds beautiful ❤❤❤ it's a gem.
Man that's my favorite ford product!
I’ll be swapping my coyote for the megazilla this winter. Good to know what kinda sound I can get out of it
That thing is sick
Thanks for the video haven’t seen much on the gas 7.3 it sounds good the way y’all did it but I liked it better the way it was so you could really hear all that power. Anyways just my 2 cent. Thanks again God bless you
That's a Beast
Absolutely beautiful! I predict that the owner will be seriously considering some 1-ton axles in the near future…
I liked the before with the crackle sound kinda fits the old school truck
That’s a lot of juice for that old rig. Man that thing is nice 🤙🏽🇺🇸
Sweet 👍 things I wish I never would have gotten rid of! 1978 Bronco, 1970 429 STJ, 4speed,. 4;10-4;09 gears and 36-12.5 super swampers!
@donniecardwell3786
6 ай бұрын
I owned a 92 Bronco 5.8 , in 08 when gas became $4 a gallon I let it go now I would love to have it back and plant a 7.3 Godzilla under the hood
@jameshuffman835
6 ай бұрын
@@donniecardwell3786 I still have a 94 with a 5.8, 84 with 4.9, 77 302, 74 302! Kinda like my ponies!!
Whoever put the exhaust on before you guys did amazing work!. Galvanized painted welds and everything. Top notch. P.S. Those mufflers are AP Xlerators.
Super sharp second generation Ford Bronco kustom 4x4.
The Godzilla even sounds like a 460 big block to me, it has that old school roar that an LS just doesn’t make.
@christybobby7147
6 ай бұрын
Yeah I commented this as well. It sounded so cool and old school muscle-y when the valves were open and I’m curious as to how/why considering it’s still a DOHC engine. Curious to know if I can make my coyote sound like this
@christybobby7147
6 ай бұрын
Wait nvm just found out it’s a OHV pushrod that makes so much more sense lmao
@coreysharp9794
6 ай бұрын
@christybobby7147 yessir it's a old school push rod!
This is what Ford should be cranking out instead of this twin turbo 6 cylinder nonsense. Perfect.
@alcerz984
6 ай бұрын
They wouldn’t make hand over fist money.
Best video….. ever
What a build
That thing was beautiful
That is just beautiful
Beautiful car!
Got Rid Of The Clap
@the_crusader25
6 ай бұрын
No
@liampuccinelli4883
6 ай бұрын
Kinda liked the clap. Made it sound a bit meaner. But with the fix it sounds lazy
@Zach-ju5vi
5 ай бұрын
Depends on what you want. On an old school vehicle a little snap works in my opinion.
@briankuhn7396
5 күн бұрын
It's like antibiotics... for the truck
Very nice.
Definitely sounds way better
Clean bronco 👍
Absolutely awesome.. I got a 1990 Ford van with only 50k miles I plan on doing a Godzilla swap on and customize it going back to a 70s style paint and interior scheme! Doing a crown Vic front end swap and 4 link rear. These coyotes and Godzilla engines make unbelievable resto mods . Ford has it in the bag with these engines now, they make these older cars come alive!!
%100 perfect 👌🏿
Nice bronco , I would have gone with flo master 40.
@iraqifoodcart8447
6 ай бұрын
You _like_ the hollow tin can sound those mufflers produce?
@loganneese9060
6 ай бұрын
@@iraqifoodcart8447 yes actually
Why would you want to make it quieter? It sounds beautiful.
Man, that is a beautiful wagon. Need to fix that spare issue though.
Whata sexy Bronco love the Godzilla killing Tesla 😂😂
Why would you want to make it quieter? It sounded beautiful.
Man this is Beautiful Sweet , 😊
Nice!👍
I like the before
nice work, I think he should put a h pipe
The intake filter has no box around it meaning it's sucking in the hot air and dirt from the engine bay.
@byronlemay2166
6 ай бұрын
I think the owner is flying by the seat of his pants.
It sounded perfect to me before the change
My favorite body style for the broncos..but personally I’m not a fan of the sound,I don’t like the fluttering sound it has now.
I’m a Furd Turd and I approve of this message 🫡
OJ SIMPSON: Now that’s a BRONCO!!!!
Man id like to see one in a old thinderbird or ltd.
ficou show
🔥🔥🔥
Needs an X pipe real bad.
@user-ex5fx5jj7z
6 ай бұрын
Yup and lose those rice resonators. Also a tachometer that works properly.
@timmysd88
6 ай бұрын
@@user-ex5fx5jj7zI commented to myself the same thing!
Still sounds like shit just quieter...needs a crossover pipe
You don't worry about the cutouts causing burned valves?
Godzilla killing Tesla, that's about right 😂🤣
I mean it sounds great, but i'd prefer the way it was before adding the borla's. Man. It sounds good either way.
very nice Bronco ... so much nicer compared to the crap Bronco they make today ...
Hey EA, Can't find Matko Motors in PA. Not posted yet. Can you post the link for the swap shop? Thanks
@stevematko3128
6 ай бұрын
I have done lots of swaps but I am just officially starting my own business.. I will have it up and going very soon… thanks
Beautiful rig. I honestly liked the original exhaust better. The after result could’ve done without the ugly tips.
What gauge cluster is that?
what flo pro muffler was it?
All you had to do was put an h pipe on it n he would've saved like 400. It was so loud n rasp cause it's true dualed.
MENGA MINT!!!
I would get the current 2023 Bronco, or a Shelby F150, and put a 7.3 in it! This is absolutely HAWT!! Mine would be anything short of quiet, that motor needs to be heard across the state!!
@bigmike9527
6 ай бұрын
What the hell did you just say? Makes no sense whatsoever?
@BobSmith-mc7uq
6 ай бұрын
Terrence has issues with drugs. lol@@bigmike9527
Man, if I was gonna put a 7.3 in a classic bronco it sure wouldn't be a gasser.
Loved my 7.3. Not so much the 10 spd. But to be honest getting 380 miles out of a 34 gal tank got old quick. Empty! Loaded even less
@techs1smh13
5 ай бұрын
Nice to hear truth.
@richvangorder3900
5 ай бұрын
@@techs1smh13 it shouldnt be shocking i suppose. Its the largest engine by any mfgr offered. It was designed to provide tremendous torque at a bargain. The truth is i didnt need its abilities. Modern day half tons are extremely capable and i chose to go back that route. In the end a truck is a tool not an extension of your personality as so many ppl think. And a 3/4 ton truck or higher used as a DD, unladen most of the time, is a pretty terrible choice just to boost ones ego
@techs1smh13
5 ай бұрын
@richvangorder3900 get tired of it makes so much torque down low and bla bla bla 18 mpg. My DMAX yes it does effortlessly and 20 some times.
@richvangorder3900
5 ай бұрын
@@techs1smh13 it should! 2 turbos and a $8,000 premium over the gas variant. Purpose built. Thats like comparing my 14L cummins to a light duty diesel. One is clearly superior to the other and purpose built for the task at hand
@techs1smh13
5 ай бұрын
@richvangorder3900 duramax engings only have one turbo. Mine is 20 years old. It's also a non emissions standard. It makes approx 750-800 ft lbs at tire and 450 hp at tire . Comparison there is non.
Very cool but I'd prefer a 7.3 powerstroke.
My buddy had a 78 Ford bronco 7.3 he had the same mother and so loud 20 Inc tips
@FirstnameLastname-pe5ib
6 ай бұрын
u wot
Sounded much better before...
Wonder what transmission is it.
@stevematko3128
4 ай бұрын
6r80
BBBBBAAAAADDDDDAAASSSS!
I had one these, 79, bbf, g2g B.W t-case, 4core rad from a camper edition ford p/u, motor still under warranty, new paint, 4spd trans, new clutch, new lights, mrk111 interior, longtubes, full exhaust, cams, head work, intake, it was all done and all new. Lord, I miss it so much. I sold it bc I was hurt and needed the money.