1971 Vw Bus Engine Removal

Автокөліктер мен көлік құралдары

Hey welcome to my channel! This is my first video ever so don't be to hard on me. Just me and my go pro working on some old VW's. Ill be getting a proper camera soon and a tripod so you can actually see what Im doing. Im working on pulling the Engine and Transmission out so I can get it rebuilt. Stay tuned for more vids of me doing random stuff to my Bus!

Пікірлер: 30

  • @TheOriginalCoda
    @TheOriginalCoda Жыл бұрын

    Although it was difficult to watch with the audio and camera issues, I really appreciate that you took the leap and recorded this. I've gotta go remove the engine in my own 71 bus in a few minutes, and getting to see where all the bolts are etc (the manuals just tell you but never show you properly) makes me a little less nervous. Thanks a lot, I'm gonna check out what other videos you've posted later.

  • @mini_worx
    @mini_worxАй бұрын

    Great video!

  • @jaychute5367
    @jaychute536710 ай бұрын

    Dude this is actually a great video. It's right to thr point without any bullshit. It's awesome you showed the throttle line so we know to disconnect it. Extremely helpful vid and pretty good quality too! Right to the point. Thanks!

  • @hunterluxton5976
    @hunterluxton5976 Жыл бұрын

    What a lovely bus.❤

  • @brandonstockton4289
    @brandonstockton42892 жыл бұрын

    Bro your camera angles aren't the best but thank God that you made this video! Thanks for the help!

  • @brycemcquair2438
    @brycemcquair24383 жыл бұрын

    Great walkthrough! we are picking up a 71 westy this saturday and it needs a clutch replacement and a couple other things, ill definitely be reloading this vid if i get stuck or need a refresh, cheers!

  • @devynkopulos1058
    @devynkopulos10583 жыл бұрын

    I call that patina perfection

  • @felixgonzalez3378

    @felixgonzalez3378

    10 ай бұрын

    😊

  • @specialfriends.1749
    @specialfriends.17493 жыл бұрын

    nice bro...

  • @MichaelMorrisseyNYC
    @MichaelMorrisseyNYC3 жыл бұрын

    Thank you for making this video. I need to take the engine out of my bus and it really helps. Which jack setup do you think works best? Can you recommend one? Also do I need an electric impact wrench or is it not totally necessary?

  • @westygarage6608

    @westygarage6608

    3 жыл бұрын

    I use a low profile 1.5 ton jack but I would recommend a full size floor jack for sure. I have a lowered bug as well so the low profile works for me. As for the impact you don’t need one but on certain parts it makes life easier. The mustache bar mounts are kind of a pain to get off without it. I’d say lots of pb blaster.

  • @juniorclassicvwbugs924
    @juniorclassicvwbugs9242 жыл бұрын

    I jus purchased one this kombi, but is a tin top

  • @MartinSage
    @MartinSage Жыл бұрын

    Child’s play 1hr max

  • @garyhuffman7953
    @garyhuffman79532 жыл бұрын

    What engine did you put in ?

  • @davidmartin1369
    @davidmartin13692 жыл бұрын

    I have a 1971 transporter that has VERY sloppy shifter. do you have a video on how to fix this?

  • @westygarage6608

    @westygarage6608

    2 жыл бұрын

    I do not unfortunately, but mine had the same issue and I went in and replaced all the shifter bushings. Although for the one toward the back you need to remove the transmission so it’s kind of a pain

  • @stucrossland3719
    @stucrossland37193 жыл бұрын

    Can you put a Bug engine in a van? Will the rear engine mount be attachable to the bug engine?

  • @devynkopulos1058

    @devynkopulos1058

    3 жыл бұрын

    Any bus past 68 has a mustache bar so you cannot put a beetle motor in unless you have the same mounting points

  • @westygarage6608

    @westygarage6608

    3 жыл бұрын

    @@devynkopulos1058 correct, although they do sell an adapter that bolts on I believe to accept the mustache bar.

  • @stucrossland3719

    @stucrossland3719

    3 жыл бұрын

    @@devynkopulos1058, Are those mounting points on the engine case?

  • @joelcantoran7403
    @joelcantoran7403 Жыл бұрын

    hi what is this engine?

  • @TheOriginalCoda

    @TheOriginalCoda

    Жыл бұрын

    Looks like a standard '71 Type 1 1600 DP, but not 100% sure.

  • @mra2957
    @mra29573 жыл бұрын

    Got sick trying to watch, camera jerkiness..Otherwise good big picture review.

  • @westygarage6608

    @westygarage6608

    3 жыл бұрын

    Yes I know! To be fair it’s my first ever video with a go pro, I think I figured out a better way to do it in the others. Thank you for watching!

  • @MrBonerinthewind
    @MrBonerinthewind2 жыл бұрын

    Dude, whats with the shake footage. not watchable

  • @westygarage6608

    @westygarage6608

    2 жыл бұрын

    Lol, first vid sorry about that, didn’t have a tripod.

  • @jackstackma
    @jackstackma2 жыл бұрын

    Couldn't watch. Too much scratching noise.

  • @356er
    @356er2 жыл бұрын

    Truly some of the worst photography in YT history.

  • @westygarage6608

    @westygarage6608

    2 жыл бұрын

    I’m sorry about that friend I’ll try better next time!

Келесі