Follow along with Tin Man Customs as we shorten a 1972 long bed Ford pickup.
Жүктеу.....
Пікірлер: 64
@frankshirley65223 жыл бұрын
Hey I have a 79 f100 father and son project could you let me know what you would charge to convert ours.
@frankshirley6522
3 жыл бұрын
@@thehousethatrustbuilttinma3608 ga not to far
@smitty315603 ай бұрын
I drove over 6 hours to take my 77 for him to do. I was not disappointed. I highly recommend him.
@michaelwalsh986 ай бұрын
As a retired welder, that is a beautiful job of welding and plating the frame, I like the oval plate with plug welds as a frame reinforcement!!!
@Rat_Poison_Devil5 ай бұрын
Nice job
@nickkuest66517 ай бұрын
Clean work
@doglegjake67882 ай бұрын
Thanks for sharing a great video
@anthonykills416 Жыл бұрын
I'm about to cut My long bed and this is SO helpfull thanks man
@thehousethatrustbuilttinma3608
Жыл бұрын
That’s why we put these videos out
@stevejanka3613 жыл бұрын
Good evening, I had to have my new rollback truck frame lengthened and they did not do a superior splice like you did. That is good engineering and excellent craftsmanship. I do like your plates on the splice with the rounded edges. That is exactly how aircraft panel splice work is done. Great video. You take care and good luck.
@martincastano34873 жыл бұрын
Awesome I thought about the fish plate too and here it is great job.
@chocodiledundee17 ай бұрын
Amazing work , you’re so fast and skilled man , and thank you for sharing all the info , I’ve got the 67-72 Bumpside Broncos made in Brazil 🇧🇷 I love the 67-72 as well as my favourite trucks . All the best from Kangaroo 🦘 Island 🏝️ South Australia 🇦🇺
@ervingoertzen7233 Жыл бұрын
Beautiful job of reinforcing, I have seen it done with just fishplates inside the frame. I know a group of truck enthusiasts doing their trucks that way and worked well. I guess each to their own as to how much you want to reinforce it
@thehousethatrustbuilttinma3608
Жыл бұрын
When dealing with customers, we like to go above and beyond. We also do it this way so the customer won’t try to sell it as all original to someone else without them knowing the frame has been heavily modified.
@jackmasterification2 жыл бұрын
Awesome work man
@williamhall320009 ай бұрын
If you don’t care about the stake pockets it would be even easier. Pretty much do a straight cut just up at the front. If you’re like me and don’t care about the 4” in the rear it gets even easier still.
@dylanphilbin34473 жыл бұрын
I like the rounded frame stiffeners Also have some quality welds on there
@MrR409a3 жыл бұрын
Thx for sharing great video
@refgarcia82183 жыл бұрын
Nice job.
@shawnwimberly92942 жыл бұрын
nice work
@franswijnands40223 жыл бұрын
Perfect die versterking u bent een ingenieur
@crisgallardo1088 Жыл бұрын
Saludos sr buen trabajo ✌️
@tonywilkes17812 жыл бұрын
Good job👍
@GregoryBamber Жыл бұрын
I prefer a long edition but I totally agree with your method of cutting. I have being welding of one sort or another for half my working life and z cuts are always stronger.
@dupremecanniedaboss14492 жыл бұрын
For sure, am going to have to bring my 70 f100 in to you
@the-btc-tradingfloor2808 Жыл бұрын
Well done
@gmspeb Жыл бұрын
I just bought a 78 F150 Ranger Lariat which I am thinking about making a short bed. Are you able to let me know roughly ( estimate - sight unseen of course ) how much such a job costs? I am in PA but would send truck down there somehow.
@HansoHasachiI8U3 жыл бұрын
Not too shabby....
@365TrustNo1 Жыл бұрын
Add a side step 🔥🔥🔥
@luispina40123 жыл бұрын
Your good.
@timcastle241 Жыл бұрын
Have you done a dentside? I’m about to get started shortening the bed by 16”, just can’t seem to get the perfect mark ups on the inner and outer bed sides yet. Not gonna cut until I’m 100% certain I have everything where I want it
@edwardlocke874 Жыл бұрын
Question for ya? Why did you cut the mid section of the frame 12” and 4” in back and 16” and 4” in the bed ? Am I missing something?
@davepsanchez3 жыл бұрын
post a video of when you did the back half please...
@donaldfrazier5244 Жыл бұрын
Nice job but,the frame is considered spring steel and must be drilled and riveted or bolted to remain flexible,in some states it’s illegal to weld a frame!
@thehousethatrustbuilttinma3608
Жыл бұрын
Unless a frame is marked do not weld, it is ok to weld. Most standard automotive frames are welded from the factory. Only in the case of semi trucks is it illegal to weld on the frame.
@heavydinsc2 жыл бұрын
I'm a little late to the party here, but do you still own the long bed you took off? If so, I'll make you an offer for it. I'm looking for one to replace what I have on my '78 F100. I've got a little too much rust to deal with. Thanks.
@chadalac1977
2 жыл бұрын
Did you watch the video ?? Never took the bed off 1st Cut the long bed up to make short bed 2nd 🤦♂️
@thehousethatrustbuilttinma3608
2 жыл бұрын
That was the original long bed we shortened
@manuelpalacios64983 жыл бұрын
How much do you charge for a conversion of a long chassis, to a short chassis? I'm located in illinois ? Where are you located?
@thehousethatrustbuilttinma3608
2 жыл бұрын
We are located in Valdese, North Carolina. Sorry I’m just now seeing this, KZread hasn’t been giving me any notifications when someone comments. Look up our Facebook page @tinmancuatomsofnc.
@kurtiswilke28672 жыл бұрын
What would you charge to do this to another f100
@crisgallardo10883 жыл бұрын
Saludos amigo en mi canal de youtube tengo algunos videos similares
@kooldoozer3 жыл бұрын
Shortening a truck from 8 foot to 6 foot is the most insane thing I have heard of. Take away hauling capacity and room ?
@russgould707
2 жыл бұрын
I fully agree. People do it all kinds of work to make their truck useless. People will start to think all the long beds look better when there are hardly any of them left.
@olmoe1167
2 жыл бұрын
Useless ???? How do you figure this just by shortening the bed ?? I have a factory short bed on mine and never had an issue,,, haul 16 foot lumber and ladders with no problems... Now if one is done that involves putting it on a Crown Vic frame and using up the bed depth,, I can see your point... To each his own... Anyway,,, there’s way more long beds than short out there.... Have a good one....
@shawnwimberly9294
2 жыл бұрын
i agree totally... and I can't wait to do it again 😂
@kooldoozer
2 жыл бұрын
@@shawnwimberly9294 Ha. Hauling 16 foot lumber in a 6 foot bed. Totally grounded in reality. Some people would draw a mustache on the Mona Lisa. Maybe your dicks too long too, might go in for a bob job. I heard chicks like em better. Just because a bunch of people get together who have bad taste, magically makes them all think that suddenly they all have the same now good taste because everyone share their ideas. And a cult of bad taste is born. Just like that.
@donaldfrazier5244
Жыл бұрын
It’s the looks of the truck not the capacity!
@juniorwhelchel63372 жыл бұрын
Where are u located at in NC
@thehousethatrustbuilttinma3608
2 жыл бұрын
Valdese, NC
@juniorwhelchel6337
2 жыл бұрын
Ok Kool I have a great aunt who lives in Caesar and I know a guy who use to live in Valdese
@felixsanchez4602 Жыл бұрын
What's the price for the whole conversion
@thehousethatrustbuilttinma3608
Жыл бұрын
We charge $2,500 for the 1967-1972 Ford pickups
@mikehames34242 жыл бұрын
I gotta 76 F100 in Conover I want you to shorten for me. Do you have contact info?
@JoseNavarro-pg4fk2 жыл бұрын
How much does it cost to have it done
@thehousethatrustbuilttinma3608
2 жыл бұрын
What year model?
@JoseNavarro-pg4fk
Жыл бұрын
It’s a 66 f100 long bed
@cesarvazquez59257 ай бұрын
How much to do this to an 86 f150
@thehousethatrustbuilttinma3608
7 ай бұрын
We haven’t done an ‘86. If you will contact us over the phone then we will talk price. We do not discuss over social media due to privacy
@coreysim28112 жыл бұрын
What a waste
@donaldfrazier5244
Жыл бұрын
Not if you compare how much these short bed trucks sell for over a long bed!
@Daddyjohn19713 ай бұрын
It kills me every time I see somebody take a long bed and destroy it.
Пікірлер: 64
Hey I have a 79 f100 father and son project could you let me know what you would charge to convert ours.
@frankshirley6522
3 жыл бұрын
@@thehousethatrustbuilttinma3608 ga not to far
I drove over 6 hours to take my 77 for him to do. I was not disappointed. I highly recommend him.
As a retired welder, that is a beautiful job of welding and plating the frame, I like the oval plate with plug welds as a frame reinforcement!!!
Nice job
Clean work
Thanks for sharing a great video
I'm about to cut My long bed and this is SO helpfull thanks man
@thehousethatrustbuilttinma3608
Жыл бұрын
That’s why we put these videos out
Good evening, I had to have my new rollback truck frame lengthened and they did not do a superior splice like you did. That is good engineering and excellent craftsmanship. I do like your plates on the splice with the rounded edges. That is exactly how aircraft panel splice work is done. Great video. You take care and good luck.
Awesome I thought about the fish plate too and here it is great job.
Amazing work , you’re so fast and skilled man , and thank you for sharing all the info , I’ve got the 67-72 Bumpside Broncos made in Brazil 🇧🇷 I love the 67-72 as well as my favourite trucks . All the best from Kangaroo 🦘 Island 🏝️ South Australia 🇦🇺
Beautiful job of reinforcing, I have seen it done with just fishplates inside the frame. I know a group of truck enthusiasts doing their trucks that way and worked well. I guess each to their own as to how much you want to reinforce it
@thehousethatrustbuilttinma3608
Жыл бұрын
When dealing with customers, we like to go above and beyond. We also do it this way so the customer won’t try to sell it as all original to someone else without them knowing the frame has been heavily modified.
Awesome work man
If you don’t care about the stake pockets it would be even easier. Pretty much do a straight cut just up at the front. If you’re like me and don’t care about the 4” in the rear it gets even easier still.
I like the rounded frame stiffeners Also have some quality welds on there
Thx for sharing great video
Nice job.
nice work
Perfect die versterking u bent een ingenieur
Saludos sr buen trabajo ✌️
Good job👍
I prefer a long edition but I totally agree with your method of cutting. I have being welding of one sort or another for half my working life and z cuts are always stronger.
For sure, am going to have to bring my 70 f100 in to you
Well done
I just bought a 78 F150 Ranger Lariat which I am thinking about making a short bed. Are you able to let me know roughly ( estimate - sight unseen of course ) how much such a job costs? I am in PA but would send truck down there somehow.
Not too shabby....
Add a side step 🔥🔥🔥
Your good.
Have you done a dentside? I’m about to get started shortening the bed by 16”, just can’t seem to get the perfect mark ups on the inner and outer bed sides yet. Not gonna cut until I’m 100% certain I have everything where I want it
Question for ya? Why did you cut the mid section of the frame 12” and 4” in back and 16” and 4” in the bed ? Am I missing something?
post a video of when you did the back half please...
Nice job but,the frame is considered spring steel and must be drilled and riveted or bolted to remain flexible,in some states it’s illegal to weld a frame!
@thehousethatrustbuilttinma3608
Жыл бұрын
Unless a frame is marked do not weld, it is ok to weld. Most standard automotive frames are welded from the factory. Only in the case of semi trucks is it illegal to weld on the frame.
I'm a little late to the party here, but do you still own the long bed you took off? If so, I'll make you an offer for it. I'm looking for one to replace what I have on my '78 F100. I've got a little too much rust to deal with. Thanks.
@chadalac1977
2 жыл бұрын
Did you watch the video ?? Never took the bed off 1st Cut the long bed up to make short bed 2nd 🤦♂️
@thehousethatrustbuilttinma3608
2 жыл бұрын
That was the original long bed we shortened
How much do you charge for a conversion of a long chassis, to a short chassis? I'm located in illinois ? Where are you located?
@thehousethatrustbuilttinma3608
2 жыл бұрын
We are located in Valdese, North Carolina. Sorry I’m just now seeing this, KZread hasn’t been giving me any notifications when someone comments. Look up our Facebook page @tinmancuatomsofnc.
What would you charge to do this to another f100
Saludos amigo en mi canal de youtube tengo algunos videos similares
Shortening a truck from 8 foot to 6 foot is the most insane thing I have heard of. Take away hauling capacity and room ?
@russgould707
2 жыл бұрын
I fully agree. People do it all kinds of work to make their truck useless. People will start to think all the long beds look better when there are hardly any of them left.
@olmoe1167
2 жыл бұрын
Useless ???? How do you figure this just by shortening the bed ?? I have a factory short bed on mine and never had an issue,,, haul 16 foot lumber and ladders with no problems... Now if one is done that involves putting it on a Crown Vic frame and using up the bed depth,, I can see your point... To each his own... Anyway,,, there’s way more long beds than short out there.... Have a good one....
@shawnwimberly9294
2 жыл бұрын
i agree totally... and I can't wait to do it again 😂
@kooldoozer
2 жыл бұрын
@@shawnwimberly9294 Ha. Hauling 16 foot lumber in a 6 foot bed. Totally grounded in reality. Some people would draw a mustache on the Mona Lisa. Maybe your dicks too long too, might go in for a bob job. I heard chicks like em better. Just because a bunch of people get together who have bad taste, magically makes them all think that suddenly they all have the same now good taste because everyone share their ideas. And a cult of bad taste is born. Just like that.
@donaldfrazier5244
Жыл бұрын
It’s the looks of the truck not the capacity!
Where are u located at in NC
@thehousethatrustbuilttinma3608
2 жыл бұрын
Valdese, NC
@juniorwhelchel6337
2 жыл бұрын
Ok Kool I have a great aunt who lives in Caesar and I know a guy who use to live in Valdese
What's the price for the whole conversion
@thehousethatrustbuilttinma3608
Жыл бұрын
We charge $2,500 for the 1967-1972 Ford pickups
I gotta 76 F100 in Conover I want you to shorten for me. Do you have contact info?
How much does it cost to have it done
@thehousethatrustbuilttinma3608
2 жыл бұрын
What year model?
@JoseNavarro-pg4fk
Жыл бұрын
It’s a 66 f100 long bed
How much to do this to an 86 f150
@thehousethatrustbuilttinma3608
7 ай бұрын
We haven’t done an ‘86. If you will contact us over the phone then we will talk price. We do not discuss over social media due to privacy
What a waste
@donaldfrazier5244
Жыл бұрын
Not if you compare how much these short bed trucks sell for over a long bed!
It kills me every time I see somebody take a long bed and destroy it.
Awesome work man