1964 Impala SS Restoration Part 3 - Remove body DIY Auto Restoration
Автокөліктер мен көлік құралдары
SHOP INFORMATION :
Contact us at : guzzifabrication@yahoo.com
Our Address is: Guzzi Fabrication
3206 Main St Suite 106
Rowlett Tx 75088
Check out my other videos in our KZread playlist page: www.youtube.com/@guzzifabrica...
Honesty - Quality - Craftsmanship
What We Do : Rust / Collision Repair
Metal Fabrication - Steel - Aluminum - Stainless
Complete Chassis / Aftermarket Chassis - Front & Rear Installation
Frame Fabrication / Straightening
Drive Train ( OEM / Custom )
Wiring
HVAC
Resto Mod
4X4
Street Rod
Hot Rod
Custom
Antique
Speed Shop
DIY Auto Restoration
Over 20 Industry Certifications on Display:
Current AWS Welding Certs
I-Car Collision certifications
PPG Paint Certifications
OSHA - 10 Certification
NCS NESHAP Certification
EPA Compliance
Blacksmithing Certificate
Eastfield College
profile.php?...
Google search : guzzi fabrication rowlett tx - To check out our reviews
Thanks for watching !
Пікірлер: 53
Enjoy all the videos and the hard work
@guzzifabrication3448
Жыл бұрын
Thank you Mr. Brown and thank you for watching !
I saw that bent frame and you say…”nothing to serious” and I would say… FML! 😂 Keep up the good work brotha!
awesome video, searched everywhere for this info! cheers!
@guzzifabrication3448
Жыл бұрын
I have 20 videos in this series on the metal work from start to finish. Thanks for watching !
I'm doing a 63 Biscayne 2Dr. This series is very well done and very helpful. Thank you. I'll be watching them many times.
@guzzifabrication3448
2 жыл бұрын
Thank you !
Kill'n it like you always do my man!! Keep up the great work, the owner if that 64 knew what he was doing when he came to you!!
@guzzifabrication3448
2 жыл бұрын
Hey brother thank you ! I take care of my customers !
Following this build . Awesome work man
@guzzifabrication3448
2 жыл бұрын
Nice! hey thanks for watching
This is great. I recently bought a 64 2dr hardtop. I need all the help I can get!
@guzzifabrication3448
2 жыл бұрын
Stay tuned, Thanks for watching !
Spectacular video ... 👍 for showing how the brake line run 🙂
@guzzifabrication3448
Жыл бұрын
This is such a stock car it's hard to get good reference material anymore I was take the opportunity when I can, thanks for watching
Good job 👌
@guzzifabrication3448
2 жыл бұрын
Thanks !
Great video. Looking forward to the next one.
@guzzifabrication3448
2 жыл бұрын
Thanks brother !
Thanks so much for the close view On the breaks lines it’s gonna be so helpful to put it on
@guzzifabrication3448
2 жыл бұрын
No problem brother
Absolutely amazing originality. Untouched. Really makes it nice for putting it back together so much easier. When you can video document the exact details like that. It will be stunning when done. 👍
@guzzifabrication3448
2 жыл бұрын
Yes Sir !
Very smooth!! Love your channel...looking forward to mor parts!!
@guzzifabrication3448
2 жыл бұрын
Thanks for the support !
Love your channel! I like the amount of extra time you take to do it right the first time. Say, I have a 62 impala ss and was following that build. When will more videos come out on that one?
What are you going to get back on the 62?
You got lucky all my body mounts had to be cut off. At least you got 1 box brace good. Both mine were bad. Good stuff man !!
@guzzifabrication3448
2 жыл бұрын
I know, right... that's the norm cutting them off..... how's your Impala coming ?
@Cheez1979
2 жыл бұрын
Mine is going good. I’m in the truck area now. Burning in the bottom pan. It’s a garage build diy.
@guzzifabrication3448
2 жыл бұрын
@@Cheez1979 Nice, I checked out your videos
Awesome channel, do you have video of removing the rear end im having trouble taking it off to swap to a posi rear end from another impala
@guzzifabrication3448
Жыл бұрын
I don't have that footage, thanks for watching !
Im doing this to a 61. How do u feel about lifting body off with glass still in place. Windshield and back window specifically
@guzzifabrication3448
2 жыл бұрын
Probably ok , but if the glass is removed, no chance of damage lifting the body off the frame. Thanks for watching !
Will this method of lifting the body off the frame work with any car?..I got the 88 luxury sport..it's a solid car but I'm scared it gonna bend the roof or put a dent in the roof some how. Thanks for your time
@guzzifabrication3448
Жыл бұрын
Yes ( except convertibles ) an important note is when lifting the through pole is long enough ( and strong enough ) with the attachment points high enough so that the chain on the end doesn't damage the roof. Thanks for watching !
@santoscamacho3361
Жыл бұрын
Thanks buddy!..I'm scared to do a frame off but your channel is very informative..Thanks and God Bless you!
@guzzifabrication3448
Жыл бұрын
@@santoscamacho3361 you can absolutely do it just take precaution and pay attention you'll be good to go hey have a great day
for a 1960 impala, are the body mounts in the same place? Thanks.
@guzzifabrication3448
8 ай бұрын
Sorry I'm not sure on that one.
@DiamondSt8lows
7 ай бұрын
@@guzzifabrication3448would lifting it up the same way you did not bend the roof? I’m in the process of buying a gantry and trying to think of a way to lift as well
@guzzifabrication3448
7 ай бұрын
@@DiamondSt8lows As long as the cross bar is long enough and the chain or strap ( which ever you use ) is at at the ends of the cross bar not touching the roof skin it won't be damaged if your asking if lifting this way will deform the roof, no it will not.... it's a stripped bare shell and the inner structure and roof skin provide plenty of structual integrity. I've lifted countless bare car / truck shells this way without issue.
What kind of gantry did you use? What’s the weight capacity? I’m working on a 64 impala as well and doing a frame off build. Just wanna get the right parts to make sure I’m doing it right!
@edgarmorales1461
2 жыл бұрын
And sorry what’s that tool called that’s holding the 4x4? Gonna need 2 of those
@guzzifabrication3448
2 жыл бұрын
I custom built that Gantry out of 4x4 11 gauge square tubing and deny being for the top.
@guzzifabrication3448
2 жыл бұрын
The tool with the hook is called a chain hoist they also have electric chain hoists also makes life a little bit easier and they come in different lifting capacities. Thanks for watching
@edgarmorales1461
2 жыл бұрын
@@guzzifabrication3448 sorry I meant the tools on the sides. That you spun around
@guzzifabrication3448
2 жыл бұрын
@@edgarmorales1461 collapsible jack stands? you can find those at a welding supply store
How can I get in touch with you regarding some metal work I want done on a charger ?!!
@guzzifabrication3448
2 жыл бұрын
contact info is in the description - Contact us at : facebook.com/profile.php? Google guzzi fabrication rowlett tx Thanks for watching !
I guess beauty is in the eyes of the beholder that car don't look like it's in too good at shape to me just because the bolts come out does not mean the car is in good shape