Good looking ride man. I see you cruzing my town this week.
@LeftForDeadGarage
Жыл бұрын
Oh man so the window sticker works! Lol Yea I figured I would be brave/dumb and ride the ole car to vacation this year. I couldn’t have picked a better time with that oddly cool beach weather. Iam glad you commented
@roamingwiththemilligans
Жыл бұрын
@@LeftForDeadGarage The weather has been odd for a few days, seen the car parked at a beach house then seen you role into the park across the street from town hall. I walked over and checked it out for a sec, did not want to bother you with your family. Then went to dirty Myrtle Tuesday-to pickup my daughter from the airport and seen you crushing 31. The car looks good man keep up the content.
@LeftForDeadGarage
Жыл бұрын
I seen a police officer walk over there while we were at the park, I was thinking yep here is where I have to try to explain that 1964 Virginia license plate. 😂😂😂 You wouldn’t have been a bother at all though. I was heading to surfside to visit my stepmother before I headed back home yesterday.
@roamingwiththemilligans
Жыл бұрын
@@LeftForDeadGarage lol no explanation needed my man.
@LeftForDeadGarage
Жыл бұрын
You must be HBPD? Lol
@danielthacker7931 Жыл бұрын
Awesome video keep up the good work.
@LeftForDeadGarage
Жыл бұрын
Thanks for watching
@bigblockkings1031 Жыл бұрын
Those calipers and brakes really did look pretty easy to install. I did the same thing to align my frontend too. Tracks pretty good on the interstate.
@LeftForDeadGarage
Жыл бұрын
I was very impressed when I opened the box to assembled spindles.
@sdkins79948 ай бұрын
GM ,im building a rolling chassis for my 64SS. If all of that is one kit, what is that kit #?🙏
@linnc7591 Жыл бұрын
what a sweet looking brake system, will you get that kit for the 55,
@LeftForDeadGarage
Жыл бұрын
It came with a new speedway kit but I want drop spindles on it too so I’ll probably do this same kit on it too
@jamieforbes388029 күн бұрын
hey do you know how much these widen the track/offset?
@LeftForDeadGarage
29 күн бұрын
It’s minimal compared to the kit I had on there, Iam thinking 5/8 or 7/8 per side. I could have swore I mentioned that in the video but if I didn’t I’ll gladly look into it for you. Thanks for watching
@jamieforbes3880
29 күн бұрын
@@LeftForDeadGarage i just watched again and you did mention 1/8,cheers great video im going to order a set.
@LeftForDeadGarage
29 күн бұрын
@jamieforbes3880 lol I was way off on my “remember” 🤦♂️. That kit i removed was like 1.500” it looked like a 4wd gm truck. If they offer an upgraded pad go for it. These in my kit create a lot of brake dust.
@elvergullio7 ай бұрын
By chance you have the brake and spindle item number from cpp?
@LeftForDeadGarage
7 ай бұрын
I had to call them when I ordered this. The PN got crazy because I wanted drilled and slotted with wilwood calipers and they were supposed to have been red calipers. I’ll see if I have the invoice though.
@elvergullio
7 ай бұрын
Appreciate ya if you do!
@LeftForDeadGarage
7 ай бұрын
@elvergullio i can’t believe i found it that easy. So the brake kit pn is 5864SWBK-D-12-WWBK then is says for the rotors ARGX-9003L ARGX-9003R Shipping was outrageous $130, don’t remember seeing that before lol.
@elvergullio
7 ай бұрын
@@LeftForDeadGarage man that’s awesome appreciate your time! Thanks again good luck in your build!!
@LeftForDeadGarage
7 ай бұрын
No problem! Call them and double check that PN. It had the rotor PN’s listed below the kit but $0.00 charge. I assume that kit number will include them.
@Freejohnsilkyputty4 ай бұрын
This guy is painful to listen to. Talk slower.
@LeftForDeadGarage
4 ай бұрын
Yea I try not to do that, I always feel rushed when making content.
@joshlepley1306 Жыл бұрын
Are those the Western Chassis spindles? They have the WC stamp on the backside. Im fighting my front end. Ive had 4 different brake setups and none of them fit how I need it to.
@LeftForDeadGarage
Жыл бұрын
Honestly idk who makes the spindles, they were just what came in the kit. Give CPP a call maybe they can tell you. FYI be prepared for a looong wait before you talk to a actual person. Hope you get it sorted out
@joshlepley1306
Жыл бұрын
@@LeftForDeadGarage first I got a kit from POL. That was a joke. They sent the wrong kit. 2nd kit did not fit either (wheels stuck out too far) so now I just got the CPP factory style disc brake drop spindles and my caliper brackets dont fit them. POL really pissed me off.
@LeftForDeadGarage
Жыл бұрын
Oh man that is a dang hassle, iam pleased with the fit of this kit. I was really expecting some sort of BS but it was almost to smooth.
@joshlepley1306
Жыл бұрын
@@LeftForDeadGarage I suppose that's how it goes when you do anything custom but dang lol I got hosed.. I wanted a zero offset drilled and slotted setup with 2 inch drop spindles but everything I found with spindles moves the wheels out too far and my 14 smash into the wheel wells and I cant lay it out.
@joshlepley1306
Жыл бұрын
@@LeftForDeadGarage so now I'm also stuck with stuff I wont be able to use. Uugh
Пікірлер: 37
Good looking ride man. I see you cruzing my town this week.
@LeftForDeadGarage
Жыл бұрын
Oh man so the window sticker works! Lol Yea I figured I would be brave/dumb and ride the ole car to vacation this year. I couldn’t have picked a better time with that oddly cool beach weather. Iam glad you commented
@roamingwiththemilligans
Жыл бұрын
@@LeftForDeadGarage The weather has been odd for a few days, seen the car parked at a beach house then seen you role into the park across the street from town hall. I walked over and checked it out for a sec, did not want to bother you with your family. Then went to dirty Myrtle Tuesday-to pickup my daughter from the airport and seen you crushing 31. The car looks good man keep up the content.
@LeftForDeadGarage
Жыл бұрын
I seen a police officer walk over there while we were at the park, I was thinking yep here is where I have to try to explain that 1964 Virginia license plate. 😂😂😂 You wouldn’t have been a bother at all though. I was heading to surfside to visit my stepmother before I headed back home yesterday.
@roamingwiththemilligans
Жыл бұрын
@@LeftForDeadGarage lol no explanation needed my man.
@LeftForDeadGarage
Жыл бұрын
You must be HBPD? Lol
Awesome video keep up the good work.
@LeftForDeadGarage
Жыл бұрын
Thanks for watching
Those calipers and brakes really did look pretty easy to install. I did the same thing to align my frontend too. Tracks pretty good on the interstate.
@LeftForDeadGarage
Жыл бұрын
I was very impressed when I opened the box to assembled spindles.
GM ,im building a rolling chassis for my 64SS. If all of that is one kit, what is that kit #?🙏
what a sweet looking brake system, will you get that kit for the 55,
@LeftForDeadGarage
Жыл бұрын
It came with a new speedway kit but I want drop spindles on it too so I’ll probably do this same kit on it too
hey do you know how much these widen the track/offset?
@LeftForDeadGarage
29 күн бұрын
It’s minimal compared to the kit I had on there, Iam thinking 5/8 or 7/8 per side. I could have swore I mentioned that in the video but if I didn’t I’ll gladly look into it for you. Thanks for watching
@jamieforbes3880
29 күн бұрын
@@LeftForDeadGarage i just watched again and you did mention 1/8,cheers great video im going to order a set.
@LeftForDeadGarage
29 күн бұрын
@jamieforbes3880 lol I was way off on my “remember” 🤦♂️. That kit i removed was like 1.500” it looked like a 4wd gm truck. If they offer an upgraded pad go for it. These in my kit create a lot of brake dust.
By chance you have the brake and spindle item number from cpp?
@LeftForDeadGarage
7 ай бұрын
I had to call them when I ordered this. The PN got crazy because I wanted drilled and slotted with wilwood calipers and they were supposed to have been red calipers. I’ll see if I have the invoice though.
@elvergullio
7 ай бұрын
Appreciate ya if you do!
@LeftForDeadGarage
7 ай бұрын
@elvergullio i can’t believe i found it that easy. So the brake kit pn is 5864SWBK-D-12-WWBK then is says for the rotors ARGX-9003L ARGX-9003R Shipping was outrageous $130, don’t remember seeing that before lol.
@elvergullio
7 ай бұрын
@@LeftForDeadGarage man that’s awesome appreciate your time! Thanks again good luck in your build!!
@LeftForDeadGarage
7 ай бұрын
No problem! Call them and double check that PN. It had the rotor PN’s listed below the kit but $0.00 charge. I assume that kit number will include them.
This guy is painful to listen to. Talk slower.
@LeftForDeadGarage
4 ай бұрын
Yea I try not to do that, I always feel rushed when making content.
Are those the Western Chassis spindles? They have the WC stamp on the backside. Im fighting my front end. Ive had 4 different brake setups and none of them fit how I need it to.
@LeftForDeadGarage
Жыл бұрын
Honestly idk who makes the spindles, they were just what came in the kit. Give CPP a call maybe they can tell you. FYI be prepared for a looong wait before you talk to a actual person. Hope you get it sorted out
@joshlepley1306
Жыл бұрын
@@LeftForDeadGarage first I got a kit from POL. That was a joke. They sent the wrong kit. 2nd kit did not fit either (wheels stuck out too far) so now I just got the CPP factory style disc brake drop spindles and my caliper brackets dont fit them. POL really pissed me off.
@LeftForDeadGarage
Жыл бұрын
Oh man that is a dang hassle, iam pleased with the fit of this kit. I was really expecting some sort of BS but it was almost to smooth.
@joshlepley1306
Жыл бұрын
@@LeftForDeadGarage I suppose that's how it goes when you do anything custom but dang lol I got hosed.. I wanted a zero offset drilled and slotted setup with 2 inch drop spindles but everything I found with spindles moves the wheels out too far and my 14 smash into the wheel wells and I cant lay it out.
@joshlepley1306
Жыл бұрын
@@LeftForDeadGarage so now I'm also stuck with stuff I wont be able to use. Uugh