1962 Austin Healey Sprite Mark II - Will It Drive?
Жүктеу.....
Пікірлер: 55
@THOMMGB3 жыл бұрын
Best of luck with this car. I was getting nervous with that driver's side rear wheel as you backed up. Good information you passed along.
@ianburit3705
3 жыл бұрын
Almost off the ramp, but still firmly on it, its a pass then..lol
@johnpearson492
3 жыл бұрын
That is the life of owning a sprite, every trailer, ramp and lift is right on the edge of too narrow. I've been told by U haul that I couldn't tow my sprite as it was too narrow for their trailer.
@easthigh3 жыл бұрын
I have a set of those ratcheting open-ended wrenches made by Craftsman. Received them as an X-mas gift back in the 90s.
@abcsd1254
3 жыл бұрын
I found some of them at our local Sears store when it was liquidating a few years ago branded Craftsman Industrial; the shipping boxes seemed to indicate they were made by Danaher Tool Group and were made in USA.
@lloydgreen40913 жыл бұрын
Ah Ha, so that's where those rectangular rubber plugs go. Knew they were for floorboard, but didn't realize they were British. Got into the misc. box, glad i didn't throw them away. I do like the white Sprite. Thank you for the video Steve.
@robertdavidson30903 жыл бұрын
Nice to see that another one of these little pieces of British automotive history is being brought back to life. Thanks for the video.
@uweh15083 жыл бұрын
Love the nononsense style of your videos, looking forward to the next one.
@daveshongkongchinachannel3 жыл бұрын
Along with almost everyone here, I'm looking forward to seeing how this project progresses.
@memyself74133 жыл бұрын
I like the way you explain things, without boring the listener to death with long drawn out unnecessary details for everything. I watched with bated breath as the driver's side rear wheel came, what looked like, dangerously close to the inner edge.................................phew! Anyway, "well done."
@johndavey723 жыл бұрын
Hi Steve. Another great video . Always entertaining and informative . My late brother had a '61 and '63 . I seem to recall the '63 had front disc's .....mind you this was 1969 !! Thanks Steve .
@buggeroff93 жыл бұрын
I would love to see more videos on this vehicle.
@144agency93 жыл бұрын
Great to see some night time driving! Plus you make it look so easy Steve!! I spent a day on my AHS Mark 4 yesterday and still could not get her started after being laid up for 12 months.
@jplacroix4613 жыл бұрын
Love your videos!!! Just the right amount of detail and fast forwarding through tedious bits. As a life long fan of LBCs I've owned Triumphs and now a 69' MGB GT as well as a 69' 1275 Midget. Your videos make owning and maintaining these wonderful classics that much easier. Keep them coming ..they're awesome.
@strokenumber33 жыл бұрын
Those old Sprites and Midgets were fun cars in their day .
@ianburit37053 жыл бұрын
Keep the videos coming young Steve, always watchable, and i`m always learning something new at my 73 years of age, and being British some cars are closer to my heart.. Thanks - Ian --UK.
@scottyh13363 жыл бұрын
I just bought my grandpas 67 Austin Healey sprite roadster it hasn’t ran in over 30 years I hope to get it restored .
@1701_FyldeFlyer3 жыл бұрын
Hey man, it's great to see you giving our old British cars a new lease of life! These cars look small today even on UK roads so I guess they must look tiny compared to your US vehicles!
@robt21513 жыл бұрын
Thanks for sharing. If you are going to be working on the brakes you could consider a front disc conversion from a later BL vehicle. It might offend the purist but not as much as a crunched bonnet would.
@2LV23 жыл бұрын
I see Steve, I press like! Where is Cassie and her Porsche? I am such a fan!
@SierraOne3 жыл бұрын
WOW What a time machine Brings back lots of memories of my younger days Thank-You!
@manuelstarr36023 жыл бұрын
Thanks for the memories. Cheers 🥂
@tiporari3 жыл бұрын
Nice work. Solid car to start from.
@mry823 жыл бұрын
Never seen a wrench that ratchets on both ends! I appreciate the editing of you videos. I am subbed to way too much stuff and the efficient informative no nonsense format of your videos is nice!
@regsparkes65073 жыл бұрын
Nice jobs there Steve. You're working on one of my 'dream cars', and I'm enjoying this 'mini series' a lot.
@davidadaur51633 жыл бұрын
Steve: I dont have an austin healey sprite or midget but I have restored several antique cars. I think you should paint the parts that you replace. The master cylinder and bracket as well as the slave cylinder. This would not improve function, only the looks. Left unpainted it will rust up and look just as bad as the old one. David Adair
@stevemercer9523 жыл бұрын
What a great little mk2, and a great video! Looking forward to part three, and also hopefully a recap on the remaining frogeyes. Thanks again.
@RedneckTaZ3 жыл бұрын
One headlight still works?? That "factree!" right there!
@JBFromOZ3 жыл бұрын
Great seeing so much Austin Healey content! love my bugeye!
@johnmoruzzi7236
3 жыл бұрын
Mk2 was a big step forward !
@stegradon78273 жыл бұрын
Keep em coming.
@hughbishopnh3 жыл бұрын
Yes Steve we want to see these kinds of videos. They are educational and slightly entertaining. But if Cassie could provide a commentary as you work thru these jobs then the entertainment factor would go up exponentially.
@elund4083 жыл бұрын
your the only car channel I subscribe to, I have given up on three others. great informative videos.
@marcryvon3 жыл бұрын
I still can't believe you can find those cars in such a nice condition today. Awesome ! What is the HP output of those engines ? 60 HP ?
@deep6thisdeep6this922 жыл бұрын
the wheels weren't far enough apart on my '61 mga to fit properly on a '60's era gas station's oil changing lift (i worked at one for a year or so back then). one side always rode up on the ledge.
@Barret_Radtke3 жыл бұрын
I seen one of those bug eyed sprites on my way home from work today it was red and on the back of a trailer or truck.
@rstevep94133 жыл бұрын
yes
@parrotraiser65413 жыл бұрын
Good thinking, opening the garage door before testing the brakes. That way, if they don't you can just roll to a stop in the yard, rather than picking the car out of the door. :-)*
@yardarm53 жыл бұрын
Fun ride great video thanks.
@jimferro40543 жыл бұрын
Good video. Keep up the good work with interesting cars, How about some Fiats, like your Dad's 850 Spyder, or a 124 Spyder?
@stephenhenion83043 жыл бұрын
Great Wrenching Here!!
@Zillustration3 жыл бұрын
i was wondering if the rear tire was going to ride off the lift as you were backing in. what about a sharpie line at the width of a tire down the rail to show you where you are? might save some grief in the future.
@jplacroix461
3 жыл бұрын
That's great idea ! I have the same problem with my 4 post lift and wouldn't have thought of doing this...cheers
@mundanestuff3 жыл бұрын
Did you customize a wrench to get to those pipe bolts or did you buy one? I think you had an example once upon a time of a wrench you bent to reach those bolts?
@ThisWeekWithCars
3 жыл бұрын
The ones on the master cylinder? No a regular open end wrench will get to them no problem.
@nickbruscia1566
2 жыл бұрын
@@ThisWeekWithCars do you recall the proper wrench size for these fittings? One loosened without a problem using an 11mm, but the other is stuck and has rounded out a bit in the past - would like to get the right size on this one to avoid destroying it.
@ianatkinson84643 жыл бұрын
😎👍
@jamesdearman8143 жыл бұрын
you need to paint a stripe down teh center of those lift rails- help you center the cars - i hold my breath every time you back on there with a small car because i think you're gonna miss the ramp.
@travisgrochoske89492 жыл бұрын
how did you remove the brake lines while the master was still bolted in the pedal box?
@triumphtr7793 жыл бұрын
When are we going to get to see that red TR7?
@ThisWeekWithCars
3 жыл бұрын
I just put it on the lift, I might film it tonight!
@triumphtr779
3 жыл бұрын
I look forward to that video
@davidkeizor15303 жыл бұрын
Need a update from Cassie on her 914
@biffick993 жыл бұрын
Master cylinder made in China. How long will it last?
Пікірлер: 55
Best of luck with this car. I was getting nervous with that driver's side rear wheel as you backed up. Good information you passed along.
@ianburit3705
3 жыл бұрын
Almost off the ramp, but still firmly on it, its a pass then..lol
@johnpearson492
3 жыл бұрын
That is the life of owning a sprite, every trailer, ramp and lift is right on the edge of too narrow. I've been told by U haul that I couldn't tow my sprite as it was too narrow for their trailer.
I have a set of those ratcheting open-ended wrenches made by Craftsman. Received them as an X-mas gift back in the 90s.
@abcsd1254
3 жыл бұрын
I found some of them at our local Sears store when it was liquidating a few years ago branded Craftsman Industrial; the shipping boxes seemed to indicate they were made by Danaher Tool Group and were made in USA.
Ah Ha, so that's where those rectangular rubber plugs go. Knew they were for floorboard, but didn't realize they were British. Got into the misc. box, glad i didn't throw them away. I do like the white Sprite. Thank you for the video Steve.
Nice to see that another one of these little pieces of British automotive history is being brought back to life. Thanks for the video.
Love the nononsense style of your videos, looking forward to the next one.
Along with almost everyone here, I'm looking forward to seeing how this project progresses.
I like the way you explain things, without boring the listener to death with long drawn out unnecessary details for everything. I watched with bated breath as the driver's side rear wheel came, what looked like, dangerously close to the inner edge.................................phew! Anyway, "well done."
Hi Steve. Another great video . Always entertaining and informative . My late brother had a '61 and '63 . I seem to recall the '63 had front disc's .....mind you this was 1969 !! Thanks Steve .
I would love to see more videos on this vehicle.
Great to see some night time driving! Plus you make it look so easy Steve!! I spent a day on my AHS Mark 4 yesterday and still could not get her started after being laid up for 12 months.
Love your videos!!! Just the right amount of detail and fast forwarding through tedious bits. As a life long fan of LBCs I've owned Triumphs and now a 69' MGB GT as well as a 69' 1275 Midget. Your videos make owning and maintaining these wonderful classics that much easier. Keep them coming ..they're awesome.
Those old Sprites and Midgets were fun cars in their day .
Keep the videos coming young Steve, always watchable, and i`m always learning something new at my 73 years of age, and being British some cars are closer to my heart.. Thanks - Ian --UK.
I just bought my grandpas 67 Austin Healey sprite roadster it hasn’t ran in over 30 years I hope to get it restored .
Hey man, it's great to see you giving our old British cars a new lease of life! These cars look small today even on UK roads so I guess they must look tiny compared to your US vehicles!
Thanks for sharing. If you are going to be working on the brakes you could consider a front disc conversion from a later BL vehicle. It might offend the purist but not as much as a crunched bonnet would.
I see Steve, I press like! Where is Cassie and her Porsche? I am such a fan!
WOW What a time machine Brings back lots of memories of my younger days Thank-You!
Thanks for the memories. Cheers 🥂
Nice work. Solid car to start from.
Never seen a wrench that ratchets on both ends! I appreciate the editing of you videos. I am subbed to way too much stuff and the efficient informative no nonsense format of your videos is nice!
Nice jobs there Steve. You're working on one of my 'dream cars', and I'm enjoying this 'mini series' a lot.
Steve: I dont have an austin healey sprite or midget but I have restored several antique cars. I think you should paint the parts that you replace. The master cylinder and bracket as well as the slave cylinder. This would not improve function, only the looks. Left unpainted it will rust up and look just as bad as the old one. David Adair
What a great little mk2, and a great video! Looking forward to part three, and also hopefully a recap on the remaining frogeyes. Thanks again.
One headlight still works?? That "factree!" right there!
Great seeing so much Austin Healey content! love my bugeye!
@johnmoruzzi7236
3 жыл бұрын
Mk2 was a big step forward !
Keep em coming.
Yes Steve we want to see these kinds of videos. They are educational and slightly entertaining. But if Cassie could provide a commentary as you work thru these jobs then the entertainment factor would go up exponentially.
your the only car channel I subscribe to, I have given up on three others. great informative videos.
I still can't believe you can find those cars in such a nice condition today. Awesome ! What is the HP output of those engines ? 60 HP ?
the wheels weren't far enough apart on my '61 mga to fit properly on a '60's era gas station's oil changing lift (i worked at one for a year or so back then). one side always rode up on the ledge.
I seen one of those bug eyed sprites on my way home from work today it was red and on the back of a trailer or truck.
yes
Good thinking, opening the garage door before testing the brakes. That way, if they don't you can just roll to a stop in the yard, rather than picking the car out of the door. :-)*
Fun ride great video thanks.
Good video. Keep up the good work with interesting cars, How about some Fiats, like your Dad's 850 Spyder, or a 124 Spyder?
Great Wrenching Here!!
i was wondering if the rear tire was going to ride off the lift as you were backing in. what about a sharpie line at the width of a tire down the rail to show you where you are? might save some grief in the future.
@jplacroix461
3 жыл бұрын
That's great idea ! I have the same problem with my 4 post lift and wouldn't have thought of doing this...cheers
Did you customize a wrench to get to those pipe bolts or did you buy one? I think you had an example once upon a time of a wrench you bent to reach those bolts?
@ThisWeekWithCars
3 жыл бұрын
The ones on the master cylinder? No a regular open end wrench will get to them no problem.
@nickbruscia1566
2 жыл бұрын
@@ThisWeekWithCars do you recall the proper wrench size for these fittings? One loosened without a problem using an 11mm, but the other is stuck and has rounded out a bit in the past - would like to get the right size on this one to avoid destroying it.
😎👍
you need to paint a stripe down teh center of those lift rails- help you center the cars - i hold my breath every time you back on there with a small car because i think you're gonna miss the ramp.
how did you remove the brake lines while the master was still bolted in the pedal box?
When are we going to get to see that red TR7?
@ThisWeekWithCars
3 жыл бұрын
I just put it on the lift, I might film it tonight!
@triumphtr779
3 жыл бұрын
I look forward to that video
Need a update from Cassie on her 914
Master cylinder made in China. How long will it last?