Walkaround of my 1961 Ford Falcon 2 door. Has a roller cam 5.0L v8 with a T5 5 speed. F303 cam, Holley Sniper EFI, Hooker Super Comp headers. Great driver!
Жүктеу.....
Пікірлер: 253
@theariesexperiment46425 ай бұрын
Look the look of that car man. The ole moonshiner wheels. Just sick AF. Perfect color as well. Great build brother. Bravo.
@OctaneElectrons
5 ай бұрын
Appreciate it!
@FIGGY655 ай бұрын
Holy COW Dude! What a wicked sounding little engine! It must be a rocket ship; it must be an absolute blast to drive!
@OctaneElectrons
5 ай бұрын
This car was a total blast. I miss it!
@rolledbrim2326
5 ай бұрын
@@OctaneElectrons wow you sold it? I was just about to ask how did the T5 hold up? I have heard stories about them jumping out of gear.
@lawrencekraemer11232 ай бұрын
Small block Fords always sound the best.
@OctaneElectrons
2 ай бұрын
Agreed!
@Edward-uz4do2 жыл бұрын
This wS my first car. Bought it from the neighbor for $1000. . 55 years ago. Thanks for the memories.
@OctaneElectrons
2 жыл бұрын
No problem, glad you liked it!
@JamesWilson-bw5uq4 ай бұрын
Great job young man!!!! I'm 76yrs of age I had a '63 k falcon 2dr Hi top four spd. I dropped in a 289 270 hp engine. Ran great for its time. I like what you've done here. Great looking ride!!!
@OctaneElectrons
4 ай бұрын
Right on! Sounds like an awesome car. I had a blast with this one.
@Kevin_7474 ай бұрын
Perfect little hot rod. Everything tastefully done. Makes me miss my '63 Ranchero.
@OctaneElectrons
4 ай бұрын
It was a great car! I miss it, but having fun building my Model A hot rod and driving my 81 Firebird now. I need to make some new videos on those soon.
@gabrielabate60203 жыл бұрын
Very nice looking Falcon!
@OctaneElectrons
3 жыл бұрын
Thanks!
@hankroberts-mi3yd8 ай бұрын
Wow. Great job sir!! Love our Falcons. You should be very proud! Looking immaculate.
@OctaneElectrons
6 ай бұрын
Thanks! Always love Falcons.
@RandysFiftySevenChevy2 жыл бұрын
Good job on this, sounds pretty healthy and makes for a great sleeper. My neighbor was a Ford guy and his first car was a 61 Falcon. A 6cyl with 3 on the tree. First thing we did is put was extended shackles on the rear springs. Then talked many nights of putting a V8 in it.. never did.
@OctaneElectrons
2 жыл бұрын
Right on, sounds awesome! It's a great car, and alot of fun.
@eddiemartin226211 ай бұрын
Best thing you done not cut the radio out did you know that radios worth a lot of money that AM radio was featured from 1960 2 1962 that was one of the most powerful AM radio ever built by philco-ford and not only that only fit the Galaxy and the falcon❤😊😊 if working at reels worth a lot of money please keep it
@OctaneElectrons
11 ай бұрын
I agree, definitely wasn't going to cut the dash up. Looked great in there.
@exerperez4202 жыл бұрын
A beauty wow thanks for showing your beautiful falcon God bless you and your family hello 👋 from Puerto Rico 🇵🇷 see you next time 🙏🙏🙏😘😘😘🥰🇵🇷🇵🇷
@ironcast Жыл бұрын
Beautiful car. Love it.
@OctaneElectrons
Жыл бұрын
Me too!
@tedcorey30542 жыл бұрын
Nice car . My Dad had a '61 ,I think it was 2 yrs. old when he got it . It had a 170 ,factory buckets and console ,all black .
@OctaneElectrons
Жыл бұрын
Right on, great car!
@arnoldanderson15012 жыл бұрын
Such a nice Falcon, you have done a great job, thanks for sharing.
@OctaneElectrons
Жыл бұрын
Thanks! I need to do an update video soon.
@tygould2 жыл бұрын
Currently refurbing a 61 falcon and we put a 302 boss in it… sick car love that color on it
@OctaneElectrons
2 жыл бұрын
Right on! I'm sure it will be awesome.
@kenyork11072 жыл бұрын
Very nice and tidy , I wouldn't change a thing . Love it .
@OctaneElectrons
Жыл бұрын
Thank you! 😊
@muggins57 Жыл бұрын
Nice build, tastefully understated, job well done!
@OctaneElectrons
Жыл бұрын
thanks!
@genaroaviles79832 жыл бұрын
ONE OF THE BEST BEAUTIFUL FORD FALCON VIDEO, A DREAM CAR FOR SATURDAY AN SUNDAY
@OctaneElectrons
Жыл бұрын
Couldn't agree more!
@BlueOvalEdge11 ай бұрын
Sounds awesome brother. Good choice on the DUI distributor. Half the price of the blingy MSD with better performance since its curved for your application and not a universal dist.
@OctaneElectrons
11 ай бұрын
Thanks, I agree. Worked great on the car!
@billyhensley5923 жыл бұрын
Sweet falcon
@OctaneElectrons
3 жыл бұрын
Thanks!
@Nine_Finger_Wrenching Жыл бұрын
Wow!! I love that interior. The knobs matching steering wheel. ❤ outside was beautiful too. I’m all over FB market place right now looking for some rusty treasure to build with my 3 sons. Makes for great content too. 😂
@OctaneElectrons
Жыл бұрын
Right on, good luck hope you find something awesome!
@Nine_Finger_Wrenching
Жыл бұрын
@@OctaneElectrons I ended up with a 91 Mustang GT. It’s a mess 🤣 I should have content for years.
@OctaneElectrons
Жыл бұрын
@@Nine_Finger_Wrenching Haha nice. The worst ones usually provide lots of entertainment. Check out my latest video, working on a 72 Dodge van now!
@slicedbread90036 ай бұрын
Nice! I also had a '61 Falcon. It was bone stock. I always wanted to go in your direction. Then I got a '90 Mustang and had the 5.0 V8 already and sold the Falcon. Regrets. Yea, especially seeing your Falcon. Nice job. I like the steel wheels.
@OctaneElectrons
5 ай бұрын
Right on! thanks!
@johnosborne100910 ай бұрын
Very very NICE BABY BIRD👍🏽
@OctaneElectrons
9 ай бұрын
Yes, thanks
@danonoveh81142 жыл бұрын
That is one sweetass little falcon dude, i love it 💯💯💯👍😀
@OctaneElectrons
2 жыл бұрын
Thanks! I love it. It has been my every day daily driver off and on this year while I've been trying to find a good used truck. Really fun to drive and extremely reliable.
@williamm18742 жыл бұрын
What a beautiful car......well done .....and something different...
@OctaneElectrons
2 жыл бұрын
Thanks! I need to do another new video. Since this, I've done Holley CD ignition, Holley Dual-Sync distributor so the Sniper ECU can control timing. I've also had the car pinstriped and it's looking awesome.
@deborahchesser73757 ай бұрын
Yeh man ! Granny’s ride is under cover I love it.
@OctaneElectrons
6 ай бұрын
Yup!
@ozzymd16 ай бұрын
Nice car , I like all the modifications ! 👍
@OctaneElectrons
5 ай бұрын
Thanks! 👍
@gregkistner19553 жыл бұрын
Great looking and sounding car! Nice work!
@OctaneElectrons
3 жыл бұрын
Glad you enjoy it!
@eddienash54262 жыл бұрын
LOVE THIS CAR!
@OctaneElectrons
2 жыл бұрын
Thanks alot!
@dintexas2095 Жыл бұрын
Nice Job ! 😊. You did good !
@OctaneElectrons
Жыл бұрын
Thank you! 😁
@gw88gt7 ай бұрын
8 gallon oil pan?! I'd hate to see that oil change receipt 😂 Nice car man. Never been much of a fan of those but this one looks nice
@OctaneElectrons
6 ай бұрын
It's probably overkill I agree. But it looks cool! And more oil don't hurt.
@calescapee96426 ай бұрын
I like the Horseless Carriage plates.
@OctaneElectrons
5 ай бұрын
Best deal for registration! $5/year in CO.
@rma79212 жыл бұрын
Clean clean... have a 60 falcon myself and I'm on the fence about tossing in a 302 or keeping it stock... after that turn over start and the holley efi setup, think I'm not on the fence anymore... what u got is just too much fun!!
@OctaneElectrons
2 жыл бұрын
Right on! I'd got 302, it's worth it.
@markraborn43262 жыл бұрын
Nice Falcon my first car was 64 falcon sprint still love falcons nice car thanks for the video
@OctaneElectrons
2 жыл бұрын
Right on! No problem.
@tomhamilton91402 жыл бұрын
Great build . Thank you for sharing.
@OctaneElectrons
2 жыл бұрын
No problem 👍
@Hereford98 Жыл бұрын
Very nice! Especially like the Sniper display next to the old instrument cluster, cool. Hey but the shifter knobs is upside-down 🙃
@OctaneElectrons
Жыл бұрын
Thanks, it was a great car and setup.
@78SilverBronco3 жыл бұрын
Awesome falcon. I’ve got a 60 with a 61 grille (2 door sedan. I love these cars. You have some beautiful paint there and super straight body. Very nicely done. I bet at only 2300lb that thing rips!
@OctaneElectrons
3 жыл бұрын
Thanks very much! I love the car it is a lot of fun.
@user-hb8be5wb4q2 жыл бұрын
This is a great build, great vlog. Much better than the 1963 Falcon Futura, 144 c.I. 6cyl., 4 speed out of an English ford, a real wheezer, and cost me an arm and leg at the time. Two months after I bought it the Ford Company they came out with the Falcon Futura fastback, 260c.I. V8, better 4 speed, great upgrade. My only thought would be some high back seats with head rests, cause that v,8 is gonna snap you head!
@OctaneElectrons
2 жыл бұрын
haha thanks! I love the car. Yes the 5.0L roller cam motor is much better than an old 144 6. That Futura with the 260 sure would be awesome though. I originally had tall bucket seats in the car out of a ~2000 Cougar. They just didn't fit or look right. Way too tall. I really like the lowback vintage vinyl buckets in this thing.
@robertmead923410 ай бұрын
I love that shade of blue!
@OctaneElectrons
9 ай бұрын
me too!
@lindeleasley11 ай бұрын
Nicely done.
@OctaneElectrons
11 ай бұрын
Thanks!
@Sleeperdude2 жыл бұрын
Nice car, I hope to get mine there one day.
@OctaneElectrons
2 жыл бұрын
Good luck, I hope you get your car dialed in!
@garycichra9912 жыл бұрын
A good friend had a 62 Falcon wagon ‘ 3 on the tree 👍👍👍👍👍
@OctaneElectrons
2 жыл бұрын
Very cool!
@martincarranza75463 жыл бұрын
Hermoso!!! Saludos desde Argentina.
@dennishough3709
3 жыл бұрын
Muy Hermoso!!
@OctaneElectrons
3 жыл бұрын
Thanks!
@OctaneElectrons
3 жыл бұрын
Thanks!
@martincarranza7546
2 жыл бұрын
@@OctaneElectrons Aquí el Falcon es el clásico Argentino,es un auto muy amado y a la vez odiado.
@hankfink2 жыл бұрын
T-5 transmissions definitely have a speedo cable hookup, and plenty of gears for your rear end+tire height
@OctaneElectrons
Жыл бұрын
This T5 definitely does not have a speedo cable. I believe it is from a 90's mustang that had an electronic speedo output. It is geared perfectly for the car!
@scottbivins40513 жыл бұрын
That is one nice 61 Falcon.
@OctaneElectrons
2 жыл бұрын
Thanks, I love it!
@russellcarter18722 жыл бұрын
Awesome car. I will own one someday. My dad had a 61 wagon when I was young. Kick myself in the ass for letting it go.
@OctaneElectrons
2 жыл бұрын
Right on, I hope you get one!
@michaeledwards805811 ай бұрын
Australia missed out on the early 2 doors and the V8s . my 1960 XK 4 door had 144 cubes with 2speed fordomatic.
@OctaneElectrons
11 ай бұрын
Sill an awesome car! Australian Falcons were always cool.
@michaeledwards8058
11 ай бұрын
@@OctaneElectrons they are. I only wish I'd kept all my early cars
@darrellgambrell3713 жыл бұрын
Install a metl shield between the rear seat, and the trunk. In a rear-end collision, should the gs tnk rupture, this will provide a barrier providing some protection to occupamts.
@OctaneElectrons
3 жыл бұрын
I did this on my old 66 Mustang. I'm not too worried about it on the Falcon, but might at some point.
@matiasguinea41313 жыл бұрын
Nice car regards from Argentina 🇦🇷🇦🇷🇦🇷
@OctaneElectrons
3 жыл бұрын
Thanks!
@ricktotz40783 жыл бұрын
Beautiful falcon good job
@OctaneElectrons
3 жыл бұрын
Thanks 👍
@scottsession77893 жыл бұрын
beautifully executed!! Scott
@OctaneElectrons
2 жыл бұрын
Glad you liked it!
@morganleblanc7302 жыл бұрын
Cool FALCON! I would run some American Racing Torque Thrust on it if I had it but that would be the only thing I would change.
@OctaneElectrons
2 жыл бұрын
Thanks! I've looked at other rims, but I like these 15" wheels with the small center caps for now.
@tonyfriend74133 жыл бұрын
Man those Falcons from that generation are getting hard to find. When i had mine from 1978-1982. There was still plenty of them around yet. Not no more though.
@OctaneElectrons
3 жыл бұрын
I haven't seen another one around here in years. It's usually the only Falcon at Cars & Coffee and any shows. More interesting than a Mustang!
@tonyfriend7413
3 жыл бұрын
For sure.
@tonyfriend7413
3 жыл бұрын
I do not a Still a Dime a dozen cars and trucks. I like the rare ones.
@tonyfriend7413
3 жыл бұрын
Sorry like those
@americanmadejustice21683 ай бұрын
She’s beautiful
@OctaneElectrons
2 ай бұрын
Thanks!
@johnblake90442 жыл бұрын
I too had a 62 falcon ranchero. Wish I had it now
@OctaneElectrons
2 жыл бұрын
Right on! Love Rancheros.
@lilorbielilorbie24962 жыл бұрын
Man I'll bet that thing is a blast to drive. Years ago my Great Aunt had one but it was a four door. She drove the wheels off of that thing. Right now I know where there is a car like yours that has been sitting up on jack stands under a carport for about 15 years. Do I need a another project not really.
@OctaneElectrons
2 жыл бұрын
It is a lot of fun! Sounds like you should grab that project car...
@lilorbielilorbie2496
2 жыл бұрын
@@OctaneElectrons Man my two bay shop is full and things are starting to take over my yard sooo. But with more projects in the yard that means there is less yard to mow. lol.
@B1Springfield2 жыл бұрын
Really nicely done car!
@OctaneElectrons
2 жыл бұрын
Thanks!
@commonsensepatriot94506 ай бұрын
Very nice!
@OctaneElectrons
5 ай бұрын
Thanks!
@johnmeredith602 жыл бұрын
Nice little car
@OctaneElectrons
2 жыл бұрын
Thanks! It's been great.
@SchofieldBrothersRacing2 жыл бұрын
Very nice car. I have a 62 I am building for drag and drive type stuff.
@OctaneElectrons
Жыл бұрын
Sounds great!
@garycichra9912 жыл бұрын
Nice. Nice Build. 👍👍👍
@OctaneElectrons
2 жыл бұрын
Thanks 👍
@zsuedram3 жыл бұрын
Hey all you need to do is shrink the headliner with a heat gun !!!! It is very simple just go slow heat then pull the heat gun back ! It will shrink
@OctaneElectrons
3 жыл бұрын
I've tried that a bit. It helped a little but didn't totally smooth it out. I will try again soon.
@johnp19663 жыл бұрын
world products are a good cylinder head. nice falcon.
@OctaneElectrons
3 жыл бұрын
They are just fine after having my local machine shop set them up correctly for the cam.
@dennishough37093 жыл бұрын
As light as the car is I bet she flys!!
@OctaneElectrons
3 жыл бұрын
It's fast, and alot of fun!
@amyjoobryan38072 жыл бұрын
Bad ass brother.love it.
@OctaneElectrons
2 жыл бұрын
Right on thanks!
@vincentenk44493 жыл бұрын
Nice ride!
@OctaneElectrons
3 жыл бұрын
Thanks!
@kiplindsay84133 жыл бұрын
Nice work!!!
@OctaneElectrons
3 жыл бұрын
Thanks!
@venvnco62593 жыл бұрын
Really nice car.
@OctaneElectrons
3 жыл бұрын
Thanks I agree!
@sorshiaemms59592 жыл бұрын
MY DAD DAD ONE WISH I HAD ONE NICE WITH THE V 8
@OctaneElectrons
2 жыл бұрын
right on!
@mastermatt289 Жыл бұрын
What oil pan did you use to clear I steering? Love the set up you have
@OctaneElectrons
Жыл бұрын
It has a Jegs (or Summit, don't remember) house-brand 7 or 8 quart (dont remember) oil pan. It's similar to a Moroso pan I've seen for sale. Works great and much cheaper.
@genius-no5sl2 жыл бұрын
Beautiful
@OctaneElectrons
2 жыл бұрын
Thank you! Cheers!
@MrLowrider5272 жыл бұрын
Sweet Ride
@OctaneElectrons
2 жыл бұрын
Thanks!
@derekhogle61862 жыл бұрын
I’m not sure how I’ve just now found this video. I’ve got almost the exact setup you do on my 63. I’d love to chat, if I that’s possible.
@OctaneElectrons
2 жыл бұрын
Sure! Email me at octaneandelectrons@gmail.com.
@victorslowik37863 жыл бұрын
Any Harleys in the works? Greetings from Texas. :)
@OctaneElectrons
3 жыл бұрын
I rode my old 98 Dyna Super Glide down to San Felipe in Baja Mexico about 3 weeks ago. 2 week trip with the boys, about 3k miles on old Dynas for the El Diablo Run. Bike's still in pretty rough shape from the trip, so it'll be getting fixed up soon. Currently working on a 2004 Royal Enfield Bullet 500 build, and a 1971 Moto Guzzi Ambassador rebuild, so the Harley will probably be sitting for a bit.
@user-cm4bg7zz6eАй бұрын
Very nice..what are the front bucket seats out of..who makes em..I have a 63 futura and I don't like the bench seat..
@OctaneElectrons
Ай бұрын
They are ProCar by Scat lowback vintage buckets. Easy to get at Summit/Jegs. Use the Procar 64+ Falcon seat bases and sliders, they work fine just have to drill some new holes for the inner mounts.
@johna11603 жыл бұрын
7:00 Every viewer with OCD just had a melt down!
@OctaneElectrons
3 жыл бұрын
Haha nice. I had borrowed the shift lever and 4 speed knob from my buddies galaxy to see if I liked the height. I've since replaced it with a new Hurst stick and correct 5 speed knob!
@ronnieking10253 жыл бұрын
return spring on the throttle would be nice
@OctaneElectrons
3 жыл бұрын
What makes you think there is no throttle return spring? I have 2. You can clearly see it from the bottom of the throttle linkage to rear of intake manifold at: kzread.info/dash/bejne/a42Xt5mygsKuZZs.html
@TOBYH3 жыл бұрын
Last comment, spray some tire black spray on the tires then you are set!
@OctaneElectrons
3 жыл бұрын
Yup it needs that for sure.
@dcheetham8603 Жыл бұрын
Hey man, me again - what did you do for exhaust manifolds/headers? I have a set of gt40p Heads that I'd like to use on the 302 I'm swapping in for the original 260...
@OctaneElectrons
Жыл бұрын
Standard Hooker Super Comp headers for 302. They fit fine. Very tight clearance at the steering box, had to put a dent in them to clear well at that point but that's it. Overall they were great.
@dcheetham8603
Жыл бұрын
@@OctaneElectrons Thank you!
@mastermatt289 Жыл бұрын
Hey can you tell me how much clearance you have at the bell housing to firewall please. I’m using a 95 bell housing and someone told me it will hit the fire wall. Thanks for answering my questions. Love the car.
@EvanGrist
Жыл бұрын
Sure I'll check. Email me at octaneandelectrons@gmail.com. I can take some pictures for you.
@OctaneElectrons
Жыл бұрын
Send me an email below and I'll check for you.
@jackwill357810 ай бұрын
saaaweeeet !
@OctaneElectrons
9 ай бұрын
Thanks!
@moerizk37536 ай бұрын
What is the front end made up of? 5 lugs? Spindles from another car? Steering? Or is it all original. I’m doing the same build and wondering what I should use for the front end suspension steering and brakes.
@OctaneElectrons
5 ай бұрын
Yes 5 lugs from a Mustang I believe? I don't remember now sorry. Worth it for wheel/tire options.
@CastleGraphics2 жыл бұрын
My '61 is very close to yours with the config. '85 GT 5.0 & T5. 4-wheel discs & panhard bar on rear
@OctaneElectrons
2 жыл бұрын
Sounds awesome. Any video of it on here?
@CastleGraphics
2 жыл бұрын
Just a bit of dash cam before it got painted. It's blue now, which was it's original color, and it also has the EFI now. kzread.info/dash/bejne/oXypo8mjdMyfdNY.html
@ronmorris1641 Жыл бұрын
What exhaust manifold do you have on the driver side? I am doing a 1960 Comet and the original manifold hits the steering worm gear...any help would be greatly appreciated, thanks!
@OctaneElectrons
Жыл бұрын
Hooker super comp headers. Had to clearance the driver side a bit with a hammer, but they fit.
@TOBYH3 жыл бұрын
Here's a good tip for polishing it, I detailed cars for 50 years from age 14 to age 64, try the new Mothers cmx ceramic spray wax, fantastic results, fills in all the fine scratches, best polish I have ever used, get it on Amazon, $17 bucks, Dave
@OctaneElectrons
3 жыл бұрын
Nice thanks!
@mastermatt289 Жыл бұрын
What headers did you use? Will the 5.0 factory Shorty headers fit or is there a better option that will fit the falcon, thanks
@OctaneElectrons
Жыл бұрын
They are Hooker Super Comp headers for a 5.0. They do fit but are very tight next to the steering box, and need to be clearanced (with a hammer haha) a bit. I did not see a better option.
@fugubudday2 ай бұрын
Any chance you know the number for the upper radiator hose?
@OctaneElectrons
2 ай бұрын
I don't recall sorry!
@rayplaag56655 ай бұрын
nice !
@OctaneElectrons
5 ай бұрын
Thanks!
@mastermatt289 Жыл бұрын
Nice car! I have a 63 and getting ready to put in a 95 mustang engine and T5. Did you you the mustang tail shaft and if so do you think it’s to far back for use with a bench seat? What crossmember did you go with? Keep up the video’s!
@OctaneElectrons
Жыл бұрын
Right on! I don't recall, I believe it might be a chevy s10 tailshaft that moves the shifter further forward. The Mustang tailshaft sits further back and might interfere with a bench seat. The crossmember is fabricated. Thanks!
@jimskenadore17913 жыл бұрын
Boys with the toy's.
@OctaneElectrons
2 жыл бұрын
Yup
@jarredloffler4331 Жыл бұрын
What size wheels and tires are those? Any spacers or mods to make them fit?
@OctaneElectrons
Жыл бұрын
15", though I don't recall exact tire sizes. No spacers needed but very close to fenders.
@robertrodriguez89344 ай бұрын
What headers did you use for this set up?
@OctaneElectrons
3 ай бұрын
Hooker Super Comp. Needed a bit of clearancing (with a hammer) around the steering box, otherwise fit great.
@concernedcitizen13202 жыл бұрын
what is needed to swap in a 289? Suspension mods? Mounts? Etc?
@OctaneElectrons
2 жыл бұрын
This car has v8 falcon springs, stock otherwise. It will get upgraded this year most likely. The 5.0 swap was done when I bought it, not sure what mounts were used.
@SuperMustang331 Жыл бұрын
Can you tell me exactly what Holley you have and what fuel system with it. I have a 62 and looking to do the same exact thing
@OctaneElectrons
Жыл бұрын
Its the base Holley Sniper system. I'm using the Falcon/Mustang 14 gallon tank in-tank regulated fuel pump with no return needed. Works great.
@classicstangbrn8964 Жыл бұрын
What t5 are you running to not use a speedometer cable?
@OctaneElectrons
Жыл бұрын
I believe it was Fox body mustang, but I don't recall.
@fabiogauna40113 жыл бұрын
Ey!! hermoso Falcon..
@OctaneElectrons
3 жыл бұрын
gracias!
@johnjtrey2 жыл бұрын
Any chance you can dig up the link for the seats? Those are some quality seats for the price! Sick car!
@OctaneElectrons
2 жыл бұрын
Ya no problem, I posted it below: Sure they are ProCar by SCAT lowback buckets. Passenger: www.jegs.com/i/Scat/942/80-1400-51R/10002/-1 Driver: www.jegs.com/i/Scat/942/80-1400-51L/10002/-1 And I used the later Falcon seat brackets, they fit perfectly. The outer holes were already there, but since this was a bench seat car I had to drill the inner holes for each bracket. Passenger: www.summitracing.com/parts/SCA-81241 Driver: www.summitracing.com/parts/SCA-81240
@JonathanSparks-ht4vq4 ай бұрын
What are the rims and tires off of???
@OctaneElectrons
4 ай бұрын
Really not sure. They are pretty common 15" ford steel wheels. The hubcaps are from a Crown Vic I think.
@l.munnier96582 жыл бұрын
Q. Is that A , 4 or 5 SPD. Trans. ??? Thinking about 5 SPD. In my wife 63 Merc. Comet. Thanks Lou. M.
@OctaneElectrons
2 жыл бұрын
5 speed, a T5 out of a Mustang. The 5th gear is great for highway speed cruising.
@l.munnier9658
2 жыл бұрын
@@OctaneElectrons Did you have to cut up the tunnel or anything else, I know you need a hole for the shifter. My comet is a rag top.
@W.H.Slater-49Fordlightning2 жыл бұрын
Do you remember which tank that you have is the fuel pump top load or front?
@OctaneElectrons
2 жыл бұрын
I had to put in a 66 Mustang 14 gallon tank to fit the Holley fuel pump. It fits and works fine. The Falcon had a stock 11 gal tank that is not compatible with the Holley in tank pump. The pump installs in the front side and bottom of the tank.
@W.H.Slater-49Fordlightning
2 жыл бұрын
@@OctaneElectrons Thanks so much for your reply. I getting ready to order a tank, is yours a top load or a front load. I need a 255lph and 58psi is that the same as yours. Thanks Bill
Пікірлер: 253
Look the look of that car man. The ole moonshiner wheels. Just sick AF. Perfect color as well. Great build brother. Bravo.
@OctaneElectrons
5 ай бұрын
Appreciate it!
Holy COW Dude! What a wicked sounding little engine! It must be a rocket ship; it must be an absolute blast to drive!
@OctaneElectrons
5 ай бұрын
This car was a total blast. I miss it!
@rolledbrim2326
5 ай бұрын
@@OctaneElectrons wow you sold it? I was just about to ask how did the T5 hold up? I have heard stories about them jumping out of gear.
Small block Fords always sound the best.
@OctaneElectrons
2 ай бұрын
Agreed!
This wS my first car. Bought it from the neighbor for $1000. . 55 years ago. Thanks for the memories.
@OctaneElectrons
2 жыл бұрын
No problem, glad you liked it!
Great job young man!!!! I'm 76yrs of age I had a '63 k falcon 2dr Hi top four spd. I dropped in a 289 270 hp engine. Ran great for its time. I like what you've done here. Great looking ride!!!
@OctaneElectrons
4 ай бұрын
Right on! Sounds like an awesome car. I had a blast with this one.
Perfect little hot rod. Everything tastefully done. Makes me miss my '63 Ranchero.
@OctaneElectrons
4 ай бұрын
It was a great car! I miss it, but having fun building my Model A hot rod and driving my 81 Firebird now. I need to make some new videos on those soon.
Very nice looking Falcon!
@OctaneElectrons
3 жыл бұрын
Thanks!
Wow. Great job sir!! Love our Falcons. You should be very proud! Looking immaculate.
@OctaneElectrons
6 ай бұрын
Thanks! Always love Falcons.
Good job on this, sounds pretty healthy and makes for a great sleeper. My neighbor was a Ford guy and his first car was a 61 Falcon. A 6cyl with 3 on the tree. First thing we did is put was extended shackles on the rear springs. Then talked many nights of putting a V8 in it.. never did.
@OctaneElectrons
2 жыл бұрын
Right on, sounds awesome! It's a great car, and alot of fun.
Best thing you done not cut the radio out did you know that radios worth a lot of money that AM radio was featured from 1960 2 1962 that was one of the most powerful AM radio ever built by philco-ford and not only that only fit the Galaxy and the falcon❤😊😊 if working at reels worth a lot of money please keep it
@OctaneElectrons
11 ай бұрын
I agree, definitely wasn't going to cut the dash up. Looked great in there.
A beauty wow thanks for showing your beautiful falcon God bless you and your family hello 👋 from Puerto Rico 🇵🇷 see you next time 🙏🙏🙏😘😘😘🥰🇵🇷🇵🇷
Beautiful car. Love it.
@OctaneElectrons
Жыл бұрын
Me too!
Nice car . My Dad had a '61 ,I think it was 2 yrs. old when he got it . It had a 170 ,factory buckets and console ,all black .
@OctaneElectrons
Жыл бұрын
Right on, great car!
Such a nice Falcon, you have done a great job, thanks for sharing.
@OctaneElectrons
Жыл бұрын
Thanks! I need to do an update video soon.
Currently refurbing a 61 falcon and we put a 302 boss in it… sick car love that color on it
@OctaneElectrons
2 жыл бұрын
Right on! I'm sure it will be awesome.
Very nice and tidy , I wouldn't change a thing . Love it .
@OctaneElectrons
Жыл бұрын
Thank you! 😊
Nice build, tastefully understated, job well done!
@OctaneElectrons
Жыл бұрын
thanks!
ONE OF THE BEST BEAUTIFUL FORD FALCON VIDEO, A DREAM CAR FOR SATURDAY AN SUNDAY
@OctaneElectrons
Жыл бұрын
Couldn't agree more!
Sounds awesome brother. Good choice on the DUI distributor. Half the price of the blingy MSD with better performance since its curved for your application and not a universal dist.
@OctaneElectrons
11 ай бұрын
Thanks, I agree. Worked great on the car!
Sweet falcon
@OctaneElectrons
3 жыл бұрын
Thanks!
Wow!! I love that interior. The knobs matching steering wheel. ❤ outside was beautiful too. I’m all over FB market place right now looking for some rusty treasure to build with my 3 sons. Makes for great content too. 😂
@OctaneElectrons
Жыл бұрын
Right on, good luck hope you find something awesome!
@Nine_Finger_Wrenching
Жыл бұрын
@@OctaneElectrons I ended up with a 91 Mustang GT. It’s a mess 🤣 I should have content for years.
@OctaneElectrons
Жыл бұрын
@@Nine_Finger_Wrenching Haha nice. The worst ones usually provide lots of entertainment. Check out my latest video, working on a 72 Dodge van now!
Nice! I also had a '61 Falcon. It was bone stock. I always wanted to go in your direction. Then I got a '90 Mustang and had the 5.0 V8 already and sold the Falcon. Regrets. Yea, especially seeing your Falcon. Nice job. I like the steel wheels.
@OctaneElectrons
5 ай бұрын
Right on! thanks!
Very very NICE BABY BIRD👍🏽
@OctaneElectrons
9 ай бұрын
Yes, thanks
That is one sweetass little falcon dude, i love it 💯💯💯👍😀
@OctaneElectrons
2 жыл бұрын
Thanks! I love it. It has been my every day daily driver off and on this year while I've been trying to find a good used truck. Really fun to drive and extremely reliable.
What a beautiful car......well done .....and something different...
@OctaneElectrons
2 жыл бұрын
Thanks! I need to do another new video. Since this, I've done Holley CD ignition, Holley Dual-Sync distributor so the Sniper ECU can control timing. I've also had the car pinstriped and it's looking awesome.
Yeh man ! Granny’s ride is under cover I love it.
@OctaneElectrons
6 ай бұрын
Yup!
Nice car , I like all the modifications ! 👍
@OctaneElectrons
5 ай бұрын
Thanks! 👍
Great looking and sounding car! Nice work!
@OctaneElectrons
3 жыл бұрын
Glad you enjoy it!
LOVE THIS CAR!
@OctaneElectrons
2 жыл бұрын
Thanks alot!
Nice Job ! 😊. You did good !
@OctaneElectrons
Жыл бұрын
Thank you! 😁
8 gallon oil pan?! I'd hate to see that oil change receipt 😂 Nice car man. Never been much of a fan of those but this one looks nice
@OctaneElectrons
6 ай бұрын
It's probably overkill I agree. But it looks cool! And more oil don't hurt.
I like the Horseless Carriage plates.
@OctaneElectrons
5 ай бұрын
Best deal for registration! $5/year in CO.
Clean clean... have a 60 falcon myself and I'm on the fence about tossing in a 302 or keeping it stock... after that turn over start and the holley efi setup, think I'm not on the fence anymore... what u got is just too much fun!!
@OctaneElectrons
2 жыл бұрын
Right on! I'd got 302, it's worth it.
Nice Falcon my first car was 64 falcon sprint still love falcons nice car thanks for the video
@OctaneElectrons
2 жыл бұрын
Right on! No problem.
Great build . Thank you for sharing.
@OctaneElectrons
2 жыл бұрын
No problem 👍
Very nice! Especially like the Sniper display next to the old instrument cluster, cool. Hey but the shifter knobs is upside-down 🙃
@OctaneElectrons
Жыл бұрын
Thanks, it was a great car and setup.
Awesome falcon. I’ve got a 60 with a 61 grille (2 door sedan. I love these cars. You have some beautiful paint there and super straight body. Very nicely done. I bet at only 2300lb that thing rips!
@OctaneElectrons
3 жыл бұрын
Thanks very much! I love the car it is a lot of fun.
This is a great build, great vlog. Much better than the 1963 Falcon Futura, 144 c.I. 6cyl., 4 speed out of an English ford, a real wheezer, and cost me an arm and leg at the time. Two months after I bought it the Ford Company they came out with the Falcon Futura fastback, 260c.I. V8, better 4 speed, great upgrade. My only thought would be some high back seats with head rests, cause that v,8 is gonna snap you head!
@OctaneElectrons
2 жыл бұрын
haha thanks! I love the car. Yes the 5.0L roller cam motor is much better than an old 144 6. That Futura with the 260 sure would be awesome though. I originally had tall bucket seats in the car out of a ~2000 Cougar. They just didn't fit or look right. Way too tall. I really like the lowback vintage vinyl buckets in this thing.
I love that shade of blue!
@OctaneElectrons
9 ай бұрын
me too!
Nicely done.
@OctaneElectrons
11 ай бұрын
Thanks!
Nice car, I hope to get mine there one day.
@OctaneElectrons
2 жыл бұрын
Good luck, I hope you get your car dialed in!
A good friend had a 62 Falcon wagon ‘ 3 on the tree 👍👍👍👍👍
@OctaneElectrons
2 жыл бұрын
Very cool!
Hermoso!!! Saludos desde Argentina.
@dennishough3709
3 жыл бұрын
Muy Hermoso!!
@OctaneElectrons
3 жыл бұрын
Thanks!
@OctaneElectrons
3 жыл бұрын
Thanks!
@martincarranza7546
2 жыл бұрын
@@OctaneElectrons Aquí el Falcon es el clásico Argentino,es un auto muy amado y a la vez odiado.
T-5 transmissions definitely have a speedo cable hookup, and plenty of gears for your rear end+tire height
@OctaneElectrons
Жыл бұрын
This T5 definitely does not have a speedo cable. I believe it is from a 90's mustang that had an electronic speedo output. It is geared perfectly for the car!
That is one nice 61 Falcon.
@OctaneElectrons
2 жыл бұрын
Thanks, I love it!
Awesome car. I will own one someday. My dad had a 61 wagon when I was young. Kick myself in the ass for letting it go.
@OctaneElectrons
2 жыл бұрын
Right on, I hope you get one!
Australia missed out on the early 2 doors and the V8s . my 1960 XK 4 door had 144 cubes with 2speed fordomatic.
@OctaneElectrons
11 ай бұрын
Sill an awesome car! Australian Falcons were always cool.
@michaeledwards8058
11 ай бұрын
@@OctaneElectrons they are. I only wish I'd kept all my early cars
Install a metl shield between the rear seat, and the trunk. In a rear-end collision, should the gs tnk rupture, this will provide a barrier providing some protection to occupamts.
@OctaneElectrons
3 жыл бұрын
I did this on my old 66 Mustang. I'm not too worried about it on the Falcon, but might at some point.
Nice car regards from Argentina 🇦🇷🇦🇷🇦🇷
@OctaneElectrons
3 жыл бұрын
Thanks!
Beautiful falcon good job
@OctaneElectrons
3 жыл бұрын
Thanks 👍
beautifully executed!! Scott
@OctaneElectrons
2 жыл бұрын
Glad you liked it!
Cool FALCON! I would run some American Racing Torque Thrust on it if I had it but that would be the only thing I would change.
@OctaneElectrons
2 жыл бұрын
Thanks! I've looked at other rims, but I like these 15" wheels with the small center caps for now.
Man those Falcons from that generation are getting hard to find. When i had mine from 1978-1982. There was still plenty of them around yet. Not no more though.
@OctaneElectrons
3 жыл бұрын
I haven't seen another one around here in years. It's usually the only Falcon at Cars & Coffee and any shows. More interesting than a Mustang!
@tonyfriend7413
3 жыл бұрын
For sure.
@tonyfriend7413
3 жыл бұрын
I do not a Still a Dime a dozen cars and trucks. I like the rare ones.
@tonyfriend7413
3 жыл бұрын
Sorry like those
She’s beautiful
@OctaneElectrons
2 ай бұрын
Thanks!
I too had a 62 falcon ranchero. Wish I had it now
@OctaneElectrons
2 жыл бұрын
Right on! Love Rancheros.
Man I'll bet that thing is a blast to drive. Years ago my Great Aunt had one but it was a four door. She drove the wheels off of that thing. Right now I know where there is a car like yours that has been sitting up on jack stands under a carport for about 15 years. Do I need a another project not really.
@OctaneElectrons
2 жыл бұрын
It is a lot of fun! Sounds like you should grab that project car...
@lilorbielilorbie2496
2 жыл бұрын
@@OctaneElectrons Man my two bay shop is full and things are starting to take over my yard sooo. But with more projects in the yard that means there is less yard to mow. lol.
Really nicely done car!
@OctaneElectrons
2 жыл бұрын
Thanks!
Very nice!
@OctaneElectrons
5 ай бұрын
Thanks!
Nice little car
@OctaneElectrons
2 жыл бұрын
Thanks! It's been great.
Very nice car. I have a 62 I am building for drag and drive type stuff.
@OctaneElectrons
Жыл бұрын
Sounds great!
Nice. Nice Build. 👍👍👍
@OctaneElectrons
2 жыл бұрын
Thanks 👍
Hey all you need to do is shrink the headliner with a heat gun !!!! It is very simple just go slow heat then pull the heat gun back ! It will shrink
@OctaneElectrons
3 жыл бұрын
I've tried that a bit. It helped a little but didn't totally smooth it out. I will try again soon.
world products are a good cylinder head. nice falcon.
@OctaneElectrons
3 жыл бұрын
They are just fine after having my local machine shop set them up correctly for the cam.
As light as the car is I bet she flys!!
@OctaneElectrons
3 жыл бұрын
It's fast, and alot of fun!
Bad ass brother.love it.
@OctaneElectrons
2 жыл бұрын
Right on thanks!
Nice ride!
@OctaneElectrons
3 жыл бұрын
Thanks!
Nice work!!!
@OctaneElectrons
3 жыл бұрын
Thanks!
Really nice car.
@OctaneElectrons
3 жыл бұрын
Thanks I agree!
MY DAD DAD ONE WISH I HAD ONE NICE WITH THE V 8
@OctaneElectrons
2 жыл бұрын
right on!
What oil pan did you use to clear I steering? Love the set up you have
@OctaneElectrons
Жыл бұрын
It has a Jegs (or Summit, don't remember) house-brand 7 or 8 quart (dont remember) oil pan. It's similar to a Moroso pan I've seen for sale. Works great and much cheaper.
Beautiful
@OctaneElectrons
2 жыл бұрын
Thank you! Cheers!
Sweet Ride
@OctaneElectrons
2 жыл бұрын
Thanks!
I’m not sure how I’ve just now found this video. I’ve got almost the exact setup you do on my 63. I’d love to chat, if I that’s possible.
@OctaneElectrons
2 жыл бұрын
Sure! Email me at octaneandelectrons@gmail.com.
Any Harleys in the works? Greetings from Texas. :)
@OctaneElectrons
3 жыл бұрын
I rode my old 98 Dyna Super Glide down to San Felipe in Baja Mexico about 3 weeks ago. 2 week trip with the boys, about 3k miles on old Dynas for the El Diablo Run. Bike's still in pretty rough shape from the trip, so it'll be getting fixed up soon. Currently working on a 2004 Royal Enfield Bullet 500 build, and a 1971 Moto Guzzi Ambassador rebuild, so the Harley will probably be sitting for a bit.
Very nice..what are the front bucket seats out of..who makes em..I have a 63 futura and I don't like the bench seat..
@OctaneElectrons
Ай бұрын
They are ProCar by Scat lowback vintage buckets. Easy to get at Summit/Jegs. Use the Procar 64+ Falcon seat bases and sliders, they work fine just have to drill some new holes for the inner mounts.
7:00 Every viewer with OCD just had a melt down!
@OctaneElectrons
3 жыл бұрын
Haha nice. I had borrowed the shift lever and 4 speed knob from my buddies galaxy to see if I liked the height. I've since replaced it with a new Hurst stick and correct 5 speed knob!
return spring on the throttle would be nice
@OctaneElectrons
3 жыл бұрын
What makes you think there is no throttle return spring? I have 2. You can clearly see it from the bottom of the throttle linkage to rear of intake manifold at: kzread.info/dash/bejne/a42Xt5mygsKuZZs.html
Last comment, spray some tire black spray on the tires then you are set!
@OctaneElectrons
3 жыл бұрын
Yup it needs that for sure.
Hey man, me again - what did you do for exhaust manifolds/headers? I have a set of gt40p Heads that I'd like to use on the 302 I'm swapping in for the original 260...
@OctaneElectrons
Жыл бұрын
Standard Hooker Super Comp headers for 302. They fit fine. Very tight clearance at the steering box, had to put a dent in them to clear well at that point but that's it. Overall they were great.
@dcheetham8603
Жыл бұрын
@@OctaneElectrons Thank you!
Hey can you tell me how much clearance you have at the bell housing to firewall please. I’m using a 95 bell housing and someone told me it will hit the fire wall. Thanks for answering my questions. Love the car.
@EvanGrist
Жыл бұрын
Sure I'll check. Email me at octaneandelectrons@gmail.com. I can take some pictures for you.
@OctaneElectrons
Жыл бұрын
Send me an email below and I'll check for you.
saaaweeeet !
@OctaneElectrons
9 ай бұрын
Thanks!
What is the front end made up of? 5 lugs? Spindles from another car? Steering? Or is it all original. I’m doing the same build and wondering what I should use for the front end suspension steering and brakes.
@OctaneElectrons
5 ай бұрын
Yes 5 lugs from a Mustang I believe? I don't remember now sorry. Worth it for wheel/tire options.
My '61 is very close to yours with the config. '85 GT 5.0 & T5. 4-wheel discs & panhard bar on rear
@OctaneElectrons
2 жыл бұрын
Sounds awesome. Any video of it on here?
@CastleGraphics
2 жыл бұрын
Just a bit of dash cam before it got painted. It's blue now, which was it's original color, and it also has the EFI now. kzread.info/dash/bejne/oXypo8mjdMyfdNY.html
What exhaust manifold do you have on the driver side? I am doing a 1960 Comet and the original manifold hits the steering worm gear...any help would be greatly appreciated, thanks!
@OctaneElectrons
Жыл бұрын
Hooker super comp headers. Had to clearance the driver side a bit with a hammer, but they fit.
Here's a good tip for polishing it, I detailed cars for 50 years from age 14 to age 64, try the new Mothers cmx ceramic spray wax, fantastic results, fills in all the fine scratches, best polish I have ever used, get it on Amazon, $17 bucks, Dave
@OctaneElectrons
3 жыл бұрын
Nice thanks!
What headers did you use? Will the 5.0 factory Shorty headers fit or is there a better option that will fit the falcon, thanks
@OctaneElectrons
Жыл бұрын
They are Hooker Super Comp headers for a 5.0. They do fit but are very tight next to the steering box, and need to be clearanced (with a hammer haha) a bit. I did not see a better option.
Any chance you know the number for the upper radiator hose?
@OctaneElectrons
2 ай бұрын
I don't recall sorry!
nice !
@OctaneElectrons
5 ай бұрын
Thanks!
Nice car! I have a 63 and getting ready to put in a 95 mustang engine and T5. Did you you the mustang tail shaft and if so do you think it’s to far back for use with a bench seat? What crossmember did you go with? Keep up the video’s!
@OctaneElectrons
Жыл бұрын
Right on! I don't recall, I believe it might be a chevy s10 tailshaft that moves the shifter further forward. The Mustang tailshaft sits further back and might interfere with a bench seat. The crossmember is fabricated. Thanks!
Boys with the toy's.
@OctaneElectrons
2 жыл бұрын
Yup
What size wheels and tires are those? Any spacers or mods to make them fit?
@OctaneElectrons
Жыл бұрын
15", though I don't recall exact tire sizes. No spacers needed but very close to fenders.
What headers did you use for this set up?
@OctaneElectrons
3 ай бұрын
Hooker Super Comp. Needed a bit of clearancing (with a hammer) around the steering box, otherwise fit great.
what is needed to swap in a 289? Suspension mods? Mounts? Etc?
@OctaneElectrons
2 жыл бұрын
This car has v8 falcon springs, stock otherwise. It will get upgraded this year most likely. The 5.0 swap was done when I bought it, not sure what mounts were used.
Can you tell me exactly what Holley you have and what fuel system with it. I have a 62 and looking to do the same exact thing
@OctaneElectrons
Жыл бұрын
Its the base Holley Sniper system. I'm using the Falcon/Mustang 14 gallon tank in-tank regulated fuel pump with no return needed. Works great.
What t5 are you running to not use a speedometer cable?
@OctaneElectrons
Жыл бұрын
I believe it was Fox body mustang, but I don't recall.
Ey!! hermoso Falcon..
@OctaneElectrons
3 жыл бұрын
gracias!
Any chance you can dig up the link for the seats? Those are some quality seats for the price! Sick car!
@OctaneElectrons
2 жыл бұрын
Ya no problem, I posted it below: Sure they are ProCar by SCAT lowback buckets. Passenger: www.jegs.com/i/Scat/942/80-1400-51R/10002/-1 Driver: www.jegs.com/i/Scat/942/80-1400-51L/10002/-1 And I used the later Falcon seat brackets, they fit perfectly. The outer holes were already there, but since this was a bench seat car I had to drill the inner holes for each bracket. Passenger: www.summitracing.com/parts/SCA-81241 Driver: www.summitracing.com/parts/SCA-81240
What are the rims and tires off of???
@OctaneElectrons
4 ай бұрын
Really not sure. They are pretty common 15" ford steel wheels. The hubcaps are from a Crown Vic I think.
Q. Is that A , 4 or 5 SPD. Trans. ??? Thinking about 5 SPD. In my wife 63 Merc. Comet. Thanks Lou. M.
@OctaneElectrons
2 жыл бұрын
5 speed, a T5 out of a Mustang. The 5th gear is great for highway speed cruising.
@l.munnier9658
2 жыл бұрын
@@OctaneElectrons Did you have to cut up the tunnel or anything else, I know you need a hole for the shifter. My comet is a rag top.
Do you remember which tank that you have is the fuel pump top load or front?
@OctaneElectrons
2 жыл бұрын
I had to put in a 66 Mustang 14 gallon tank to fit the Holley fuel pump. It fits and works fine. The Falcon had a stock 11 gal tank that is not compatible with the Holley in tank pump. The pump installs in the front side and bottom of the tank.
@W.H.Slater-49Fordlightning
2 жыл бұрын
@@OctaneElectrons Thanks so much for your reply. I getting ready to order a tank, is yours a top load or a front load. I need a 255lph and 58psi is that the same as yours. Thanks Bill