Swapping a s10 chassis under a 1949 Chevrolet 3100 pickup using Russ D Parts cab mounts.
Жүктеу.....
Пікірлер: 53
@RealWorldGarage11 ай бұрын
“Keep in mind I’m just a guy who owns a welder” 😂
@LeftForDeadGarage
11 ай бұрын
I like to make that clear lol
@lmpbzkt110 ай бұрын
Russ is an absolute legend! His knowledge and willingness to help is unmatched!
@LeftForDeadGarage
10 ай бұрын
He was quick to help in a few situations.
@briankinnear746111 ай бұрын
For a guy who owns a welder, you do very good welds !! 👌👌👍👍 Looks like a really slick conversion kit. Nice work so far. This looks like an interesting project. Be safe and stay well.
@LeftForDeadGarage
11 ай бұрын
Iam ok at it sometimes, I don’t do it enough to really improve my skills. The cab went well, the bed mounts are a little more tedious. Thanks for watching
@linnc759111 ай бұрын
cool video, you seem to get all the fun projects,
@LeftForDeadGarage
11 ай бұрын
Wish I had a massive shop so I could pack in more fun projects.
@bigblockkings103111 ай бұрын
I used to think that it was best to keep the original frame and modify it but seeing this it seems a whole lot better. Modern suspension, brakes, steering etc...
@LeftForDeadGarage
11 ай бұрын
After messing with this one I understand how this is so popular. Only down side I see is the track width is narrower on the S10 but that can be managed in several ways.
@EYE_SPIDER11 ай бұрын
Great video brotha!
@LeftForDeadGarage
11 ай бұрын
Thanks. I feel like Iam really struggling with everything though. Camera placement, audio, speaking up, getting to the point, looking at the camera and equipment issues.
@DansGarageNC11 ай бұрын
Great project. I feel like everyone wants to do this.
@LeftForDeadGarage
10 ай бұрын
Quick way to a more modern suspension, I’d never thought long bed s10’s would have become a hot commodity.
@oldguy545811 ай бұрын
Nice ..Thanks for posting.. Best Regards
@LeftForDeadGarage
11 ай бұрын
Thanks for watching!
@marksanders194211 ай бұрын
I did not know there was a kit for that….cool
@alan68327 ай бұрын
I feel like the cab structural elements might be important and would rather cut slots in the replaceable body bushings to fit the cab than cut the original cab to fit the body bushings. Plus rubber should be easier to cut and can be cut standing up.
@RealWorldGarage11 ай бұрын
Looks pretty straightforward once you have the frame stripped down
@LeftForDeadGarage
11 ай бұрын
So far so good, started messing with the bed mounting more yesterday so that will be next up.
@occoug9 ай бұрын
I know Code 504 is out of business but for the cost, does your kit come with just cab mounts or does it come with the step mounts, bed mounts and bumper mounts? I imagine I will see as I watch farther on in your project. Thanks
@LeftForDeadGarage
9 ай бұрын
Comes with everything you’ll need.
@kevinhumphrey9329 ай бұрын
We mounted a 52 gmc on a 05 1500 Chevrolet running gear
@LeftForDeadGarage
9 ай бұрын
Did it fit up pretty good?
@haffrods705511 ай бұрын
Just give me your 55 since it's not going to ever get worked on. Lol. I have one of those chassis' here for a future project. Cool project truck.
@LeftForDeadGarage
11 ай бұрын
😂😂😂. I’ll get it in the shop… eventually. I did just buy some more goodies for it so it’s not been forgotten but it’s loong loong past due on being in the shop.
@haffrods7055
11 ай бұрын
@@LeftForDeadGarage I figure if I bug the $*** out of you, it'll get some love. Lol
@eduardovelarde53187 ай бұрын
Hello, I have a 55 first series Chevy, I am watching your videos and I want to do this project on my truck My question is: what year of CHEVY S10 did you use for this project? The original distance between wheels or center of wheel axles is 116 inches?
@LeftForDeadGarage
7 ай бұрын
Any year s10 will work as but it has to be a reg cab long bed 118” wheel base. The 47-55 trucks are 116. So you can either fudge the bed placement or use a Barnes4wd spring perch and move the rearend forward. If I ever do another that’s the route that I’ll go just so I don’t have the extra inch of bed gap.
@lancedenny55008 ай бұрын
Hey what’s the part number on the body mount bushings, thanks
@LeftForDeadGarage
8 ай бұрын
Iam pretty sure this is the set he bought. Energy Suspension 3.4130G
@matthewmontoya76399 ай бұрын
So after doing this conversion would you recommend using an extended cab instead of using a long bed truck
@LeftForDeadGarage
9 ай бұрын
You will have to cut down a extended cab chassis since it’s 123”. when and if I do the 53 I bought I’ll use a long bed 118” chassis. Fudging 1” with the bed is easier than cutting a squaring a chassis but on the other hand if I had a 123” S10 chassis sitting here 🤷🏻♂️🤷🏻♂️🤷🏻♂️. If I was shopping for one I’d look for the long bed. Thanks for watching, hopefully the videos were helpful.
@matthewmontoya7639
9 ай бұрын
@@LeftForDeadGarage that makes perfect sense thank you for doing a how to with this kit I was thinking of of trying to set the cab back .5-1 inch to make up for fudging the 1 inch on the bed placement let me know how you feel about that
@LeftForDeadGarage
9 ай бұрын
@matthewmontoya7639 you welcome, Iam happy to hear it’s been useful for some folks. I wouldn’t move the cab but what I would do the next time it replace the spring perches on the axle. You can get spring perches from Barnes4wd “ (Or similar companies) that have three spring pin choices. Centered, 1” back and 1” forward. I have used them many times on 4wd truck builds. I know Barnes has perches for the small 10 bolt 2.750 dia axle tube.
@russellhuston1566
9 ай бұрын
@@LeftForDeadGarage what year s10 frames are desired to do this ?
@LeftForDeadGarage
9 ай бұрын
@russellhuston1566 any year will work, long bed reg cab is a must though. I have a short quick 6th video I’ll add about how I’ll make up for the 1” difference in the wheel base and not fudge it with the bed. Thanks for watching
@trailraideroffroad4 ай бұрын
Do you know if he has a pre 47 kit available?
@LeftForDeadGarage
4 ай бұрын
Best I know it’s just the 47-54.5 trucks. He’s on Facebook, search RussDparts I’d hate to tell you wrong. Thanks for watching
@trailraideroffroad
4 ай бұрын
@@LeftForDeadGarage I just googled him. He has a 46 posted on his page. fingers crossed.
@LeftForDeadGarage
4 ай бұрын
Good luck
@Andre_world6 ай бұрын
Which kind of frame did you use ?
@LeftForDeadGarage
6 ай бұрын
Long bed
@stevephillips18679 ай бұрын
Likeing your video, stop over explaing things.
@LeftForDeadGarage
9 ай бұрын
I’ll keep that in mind, thanks for watching.
@datzun19719 ай бұрын
We’re u fin those Mount brakes
@LeftForDeadGarage
9 ай бұрын
The master and booster will be frame mounted like they were on the 49 chassis. The firewall will stay clean.
@datzun1971
9 ай бұрын
@@LeftForDeadGarage what about the cap mount bracket where are you find those?
Пікірлер: 53
“Keep in mind I’m just a guy who owns a welder” 😂
@LeftForDeadGarage
11 ай бұрын
I like to make that clear lol
Russ is an absolute legend! His knowledge and willingness to help is unmatched!
@LeftForDeadGarage
10 ай бұрын
He was quick to help in a few situations.
For a guy who owns a welder, you do very good welds !! 👌👌👍👍 Looks like a really slick conversion kit. Nice work so far. This looks like an interesting project. Be safe and stay well.
@LeftForDeadGarage
11 ай бұрын
Iam ok at it sometimes, I don’t do it enough to really improve my skills. The cab went well, the bed mounts are a little more tedious. Thanks for watching
cool video, you seem to get all the fun projects,
@LeftForDeadGarage
11 ай бұрын
Wish I had a massive shop so I could pack in more fun projects.
I used to think that it was best to keep the original frame and modify it but seeing this it seems a whole lot better. Modern suspension, brakes, steering etc...
@LeftForDeadGarage
11 ай бұрын
After messing with this one I understand how this is so popular. Only down side I see is the track width is narrower on the S10 but that can be managed in several ways.
Great video brotha!
@LeftForDeadGarage
11 ай бұрын
Thanks. I feel like Iam really struggling with everything though. Camera placement, audio, speaking up, getting to the point, looking at the camera and equipment issues.
Great project. I feel like everyone wants to do this.
@LeftForDeadGarage
10 ай бұрын
Quick way to a more modern suspension, I’d never thought long bed s10’s would have become a hot commodity.
Nice ..Thanks for posting.. Best Regards
@LeftForDeadGarage
11 ай бұрын
Thanks for watching!
I did not know there was a kit for that….cool
I feel like the cab structural elements might be important and would rather cut slots in the replaceable body bushings to fit the cab than cut the original cab to fit the body bushings. Plus rubber should be easier to cut and can be cut standing up.
Looks pretty straightforward once you have the frame stripped down
@LeftForDeadGarage
11 ай бұрын
So far so good, started messing with the bed mounting more yesterday so that will be next up.
I know Code 504 is out of business but for the cost, does your kit come with just cab mounts or does it come with the step mounts, bed mounts and bumper mounts? I imagine I will see as I watch farther on in your project. Thanks
@LeftForDeadGarage
9 ай бұрын
Comes with everything you’ll need.
We mounted a 52 gmc on a 05 1500 Chevrolet running gear
@LeftForDeadGarage
9 ай бұрын
Did it fit up pretty good?
Just give me your 55 since it's not going to ever get worked on. Lol. I have one of those chassis' here for a future project. Cool project truck.
@LeftForDeadGarage
11 ай бұрын
😂😂😂. I’ll get it in the shop… eventually. I did just buy some more goodies for it so it’s not been forgotten but it’s loong loong past due on being in the shop.
@haffrods7055
11 ай бұрын
@@LeftForDeadGarage I figure if I bug the $*** out of you, it'll get some love. Lol
Hello, I have a 55 first series Chevy, I am watching your videos and I want to do this project on my truck My question is: what year of CHEVY S10 did you use for this project? The original distance between wheels or center of wheel axles is 116 inches?
@LeftForDeadGarage
7 ай бұрын
Any year s10 will work as but it has to be a reg cab long bed 118” wheel base. The 47-55 trucks are 116. So you can either fudge the bed placement or use a Barnes4wd spring perch and move the rearend forward. If I ever do another that’s the route that I’ll go just so I don’t have the extra inch of bed gap.
Hey what’s the part number on the body mount bushings, thanks
@LeftForDeadGarage
8 ай бұрын
Iam pretty sure this is the set he bought. Energy Suspension 3.4130G
So after doing this conversion would you recommend using an extended cab instead of using a long bed truck
@LeftForDeadGarage
9 ай бұрын
You will have to cut down a extended cab chassis since it’s 123”. when and if I do the 53 I bought I’ll use a long bed 118” chassis. Fudging 1” with the bed is easier than cutting a squaring a chassis but on the other hand if I had a 123” S10 chassis sitting here 🤷🏻♂️🤷🏻♂️🤷🏻♂️. If I was shopping for one I’d look for the long bed. Thanks for watching, hopefully the videos were helpful.
@matthewmontoya7639
9 ай бұрын
@@LeftForDeadGarage that makes perfect sense thank you for doing a how to with this kit I was thinking of of trying to set the cab back .5-1 inch to make up for fudging the 1 inch on the bed placement let me know how you feel about that
@LeftForDeadGarage
9 ай бұрын
@matthewmontoya7639 you welcome, Iam happy to hear it’s been useful for some folks. I wouldn’t move the cab but what I would do the next time it replace the spring perches on the axle. You can get spring perches from Barnes4wd “ (Or similar companies) that have three spring pin choices. Centered, 1” back and 1” forward. I have used them many times on 4wd truck builds. I know Barnes has perches for the small 10 bolt 2.750 dia axle tube.
@russellhuston1566
9 ай бұрын
@@LeftForDeadGarage what year s10 frames are desired to do this ?
@LeftForDeadGarage
9 ай бұрын
@russellhuston1566 any year will work, long bed reg cab is a must though. I have a short quick 6th video I’ll add about how I’ll make up for the 1” difference in the wheel base and not fudge it with the bed. Thanks for watching
Do you know if he has a pre 47 kit available?
@LeftForDeadGarage
4 ай бұрын
Best I know it’s just the 47-54.5 trucks. He’s on Facebook, search RussDparts I’d hate to tell you wrong. Thanks for watching
@trailraideroffroad
4 ай бұрын
@@LeftForDeadGarage I just googled him. He has a 46 posted on his page. fingers crossed.
@LeftForDeadGarage
4 ай бұрын
Good luck
Which kind of frame did you use ?
@LeftForDeadGarage
6 ай бұрын
Long bed
Likeing your video, stop over explaing things.
@LeftForDeadGarage
9 ай бұрын
I’ll keep that in mind, thanks for watching.
We’re u fin those Mount brakes
@LeftForDeadGarage
9 ай бұрын
The master and booster will be frame mounted like they were on the 49 chassis. The firewall will stay clean.
@datzun1971
9 ай бұрын
@@LeftForDeadGarage what about the cap mount bracket where are you find those?
@LeftForDeadGarage
9 ай бұрын
@datzun1971 facebook.com/russdtrucks?mibextid=2JQ9oc
@datzun1971
9 ай бұрын
@@LeftForDeadGarage thank u so much
@LeftForDeadGarage
9 ай бұрын
@datzun1971 no problem, good luck with your build.
I had a 51 truck 3100 that completed for 7yrs 2023. for your age it too late and expensive parts compare 7yrs ago.
@LeftForDeadGarage
8 ай бұрын
Just like anything and everything prices keep going up, that won’t stop me. I have no clue what my age has to do with this lol