17 - How to Make Keepsake Box Padauk and Tiger Maple Through Dovetails
Get plans for this project here:
kingsfinewoodworking.com/coll...
How to Make a Keepsake Box from Padauk and Tiger Maple with Through Dovetail Joinery.
Some items in my build
Tools:
This is all the components of the router table. These are our links.
All Woodpeckers:
Router table top: amzn.to/40DNVEm
Router lift: amzn.to/3HyOEO9
Router table stand: amzn.to/3JzMfFM
Router table fence: amzn.to/3HVlxWG
Router motor: amzn.to/3X28PtI
On/off switch: amzn.to/3YpYMjl
Thor’s Hammer Woodworking Mallet - kingsfinewoodworking.com/coll...
Grizzly Cabinet Table Saw - amzn.to/3wXwzo1
Grizzly Jointer - amzn.to/3j09TAk
BOSCH 12 Inch Sliding Glide Miter Saw - amzn.to/3j331SU
Push Block - amzn.to/3DvgyJX
Grizzly Planer - amzn.to/3x2v20l
12" Caliper - amzn.to/3HyoivY
Porter-Cable Dovetail Jig - amzn.to/3HwUJLc
Bosch Plunge Router & Fixed Base - amzn.to/3X0R3XS
Wood Glue Dispenser, 16 Oz Btl, Drip less - amzn.to/3D94pKz
Silicone Glue Applicator Set - amzn.to/3WQAk9l
Bessey 24" Parallel Clamp - amzn.to/3XOyl6u
1-11/16" Rail & Stile Bit - amzn.to/3jyXtzJ
Raised Panel Bit w/Backcutters - amzn.to/3Ju0Ylm
Hand Sanding Block - amzn.to/3Rnsx1F
Ridgid 5-Inch Random Orbit Sander - amzn.to/3JefhdM
1/4" Shank Rabbet Router Bit - amzn.to/3laZoLr
DEWALT Bar Clamp - amzn.to/3Rgtzgd
RIDGID Handheld Belt Sander - amzn.to/3Js0UD1
Grizzly Bandsaw - amzn.to/3XUUobR
1-1/8" Wood Scraper - amzn.to/3R2Xjgr
Grizzly 12" Disc Sander - amzn.to/3wsbjH4
Vix Bits (Self centering drill bits) - amzn.to/2zdReVc
Freud 1/2" spiral cutter bit
Materials:
Acetone - amzn.to/3JuEWPq
Titebond III Glue - amzn.to/3wvDDIh
Sandpaper Set 5-Inch - amzn.to/3Wygb7S
36 Grit Resin Cloth Aluminum Oxide Sanding Belt - amzn.to/3kEKH2P
Honey Amber TransTint Dye - amzn.to/3jwoQdK
Minwax Finishing Wax - amzn.to/3kRHOvz
Invisible Hinge 2-3/8" - amzn.to/3HX7Y9u
Tack Cloth - amzn.to/3XRezYh
Deft Satin Spray - amzn.to/40ffHXw
This is a very easy keepsake box build with some beautiful aspects to it. The through dovetail joinery, and the raised panel top, combined with the cut-off lid, make for what appears to be a very fancy project. It is not however, and really only involves about 10-12 pieces of wood, and a weekend of your time. If you follow along with the order in which I build there are no terribly complicated measurements or setups.
The wood I chose is African Padauk, and Maple, with a “tiger maple” grain pattern. These woods make a very nice contrast with one another, and really add to the elegance of the box.
One of the things I point out often in the video is to remember to clean the surface of padauk, and really any exotic before gluing with acetone, so that the oils come off and a strong glue bond can be achieved.
As an Amazon Associate I earn from qualifying purchases.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools: / kingsfinewoodworkingco...
Help support us through Patreon: / kingsfinewoodworking
Purchase plans on our website: kingsfinewoodworking.com/coll...
Please like and share our videos. Thank You!
We love teaching the world to do woodworking.
Пікірлер: 389
Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools. m.facebook.com/groups/134828903893994
@bradleejones9959
3 жыл бұрын
I remember that little plastic miter box.😂
I like the way you explain details instead of assume we all know thanks
@KingsFineWoodworking
7 жыл бұрын
Hi. Thank you for watching!
Mate, that’s beautiful. The contrasting woods make it. Well done.
Extremely beautiful box, I love the choice of hardwoods you have used. Again, absolutely beautiful.
Wow, very neat. I actually enjoyed watching you do that from start to finish. This is one I will definitely try. You make it look so easy because you have all the right tools and your commentary did help quite a bit . Thanks for sharing that.
Beautiful result! You are a very good teacher and you make it easy to understand the build process and you inspire confidence that anyone with patience could make this keepsake box.
Beautiful box, really enjoy how you explain the process on how you completed the box, really helpful for us that are just learning. Thanks
@KingsFineWoodworking
7 жыл бұрын
Hi Tom. Thank you very much.
That was great to watch and very informative. The base turned out really well with the two different woods.
Beautiful work! Your video on the P-C 4216 helped me a lot with mine and this is just another example of an outstanding teacher doing what he does best. Thanks for a terrific lesson. I'll send pictures when I get mine made (unless I'm embarrassed by it).
Great video with tons of useful information. I like the way you explain things and answer my questions as soon as they come to mind. The box turned out beautifully.
The box is very beautiful, and the skill put into making it is some of the finest I’ve seen. Very beautiful indeed.
That is beautiful! Thank you for sharing!
Your work is amazing, and you produce wonderful videos! I love how you get the family involved!!!
Outstanding video and beautiful work!! Thank you so much for producing it in "real time" and for narrating exactly what you are doing, and why you are doing a task in a particular fashion. It is GREATLY appreciated by we beginners!
@KingsFineWoodworking
6 жыл бұрын
Thank you!
I have learned so much from you. I like how you explain things like I have never done this before because many times i have not do it
One of the better how to videos of woodworking on KZread. Simple and easy to understand. Sincerity is evident without the look at me how great am I attitude. Good job.
I have been struggling with a polyurethane and even a spar urethane over my exotic wood projects. I will switch to lacquer. I love that your shop looks like a real shop not a movie studio full of the most expensive tools on the market.
Nice work. I, too, like making boxes like this and I also enjoy working with hardwoods like purple heart, padauk, walnut, etc. I do a couple of things differently. I noticed you cut all the pieces for the top and the separately milled each one, and then beveled the top on the table saw after the box was completed. I mill the top with the babbet joint and do the bevel before I cut it into 4 pieces. Just easier and faster for me. Also, since I don't have a massive enough band saw to handle such a wide blade, I cut the box in two pieces on the table saw. It also eliminated the need for a sanding board since the blade is cutting with the grain on all four sides. I do like the hidden hinge configuration. I use tiny super magnets for invisible closure of the top. Thanks for the video.
I saw several comments about the amount of glue you used. I too thought it was more than needed but it also reminded me of an old saying my mother used to tell me. "An ounce of prevention is worth a pound of cure"! I had rather over do than under do! Nice work!
Beautiful box, I enjoy making them myself and have found them a great gift idea personally I have found them great wedding gifts as any nieces and nephews are getting married these days. I am adding this to may favorites and will build for a July wedding gift walnut and curly maple is what I picked up yesterday, thanks for your upload this is a good project.
@KingsFineWoodworking
7 жыл бұрын
Hi, Thanks! I think, walnut & curly maple would make a fantastic combination!
Great project, loved it. A couple of tricks I've used to keep my lid from slipping in the glue up is to drop a couple grains of course salt in the glue seems to hold thing in place until the clamps take hold. The other one is use a plastic soda straw to clean out wet glue on the inside corners.
Lovely box. Great skill and underdtated workmsnship. I've decided after watching this I am going to over-glue every project, just because I can! Thank you for posting your creation.
That's beautiful work, thank you for sharing your method and steps!
Excellent project, I just love the padauk and tiger maple. I will be looking for the plans. Thanks for sharing...
@KingsFineWoodworking
7 жыл бұрын
Hi Felix! Thank you. I will let you know when they go up.
Superlative work as always. The highlight of my week. Thank you very much for another masterpiece. Kind regards.
@KingsFineWoodworking
7 жыл бұрын
Thank you!
Very beautiful box, thank you for sharing!
The acetone and oil wood and everything else explanation was very helpful no one else mention stuff like that online thank you so much sir I appreciate your help!!
@KingsFineWoodworking
6 жыл бұрын
Thank you!
Thanks for sharing the video, James! Beautiful work!
Outstanding build, thanks for sharing!
Beautiful keepsake box!!! fine craftsmanship. Thanks for the tips.
@KingsFineWoodworking
7 жыл бұрын
Hi Dale! Thank you!
It came out beautifully, love the contrasts of the two woods and thanks so much for showing the through dovetail technique, i'm going to give it a try later - i look forward to the full review also!
@KingsFineWoodworking
7 жыл бұрын
Hi, thanks. I'm just about finished editing a new build. It's actually a Bench Vise I made from exotic wood. I have a very highly detailed step by step "through dovetail" tutorial for the dovetail jig in it. In case you are interested. Here is a link to the pics of the finished Vise. facebook.com/kingsfinewoodworking/posts/2120812741478640
@jmakes3745
7 жыл бұрын
I look forward to it, my jig has been sitting in the corner of my shop for weeks now because i can't figure out how to set it up! The jig looks absolutely incredible! Its amazing the different colour woods you can get!
Excellent video! You explain the process well and your voice is quite soothing! Thanks for your tips on first cleaning exotic wood with acetone before sanding--and the tip on dipping the hinge screws in wax paste before screwing in all the way is helpful!
I could listen to you read the newspaper! Keep up the good work
@KingsFineWoodworking
7 жыл бұрын
Hi Jeremy! Thank you very much.
A beautiful box. Great narration throughout.
Well, this was totally enjoyable to watch.
Nice work and super commentary. I usually use walnut, cherry and maple mix. Like the dovetails too... Good job!!
Beautiful finished result!
Beautiful piece of work!
I'm a big fan of over-gluing as well. Better safe than sorry. Love Padauk! Especially the smell when milling.
@KingsFineWoodworking
6 жыл бұрын
Thank you for watching!
GREAT Video James! Quite inspirational. Very easy to follow instructions for those who may not have experience woodworking. Even though I have been doing woodworking for quite sometime, I still really appreciate the tips you share! Thumbs Up! Have A Super Week!.....Gus
@KingsFineWoodworking
7 жыл бұрын
Hi Gus! Thank you so much!
I have truly enjoyed your videos and look forward to seeing more of your master craftsmanship. I simply need to get off the internet and back into my own work shop. Still like taking a break or two to see what you come up with. Keep the craft moving Brother. Thanks
What a beautiful keep sake box nice work hope some day I can get that good.
Very nice and very helpful. Thank you so much for your kindness.
Wow...that was really fun to watch! And what a beautiful box. Very inspiring. Thanks for sharing.
@KingsFineWoodworking
5 жыл бұрын
Thank you!
Lovely piece!
Hello James, came to your channel through the Wood Whisperer and have really enjoyed your work process, projects and your teaching. This box is wonderful. Most people, (me included) would have chiseled the bottom corners square but your rounded technique looks absolutely stunning.
@KingsFineWoodworking
7 жыл бұрын
Hi Michael! Thank you!
I love your laid back approach.
@KingsFineWoodworking
6 жыл бұрын
Thank you!
I totally agree tight bond should support you and you should be the spokesperson for them
That is really nice work, thank you for sharing.
That is beautiful. True art
Its one thing to do AMAZING AND BEAUTIFUL WORK, but you are also a great teacher. Thank you!
@KingsFineWoodworking
3 жыл бұрын
Thank you. That’s very kind.
Wow....Very impressive! I think I make a nice box as well but I sure picked up some great tips from this video. Thank you so much.
Great job! I enjoy your videos very much!!
That’s beautiful. Padauk is such a beautiful wood. I usually just use a spray Shallack. It dries in minutes.
Fantastic work and excellent videos please keep them coming
Beautiful, Meticulous Work my Friend !
@KingsFineWoodworking
7 жыл бұрын
Thank you!
Beautiful, James. Thanks
Awesome box! 👍
@KingsFineWoodworking
7 жыл бұрын
Thank you very much.
Excellent video and beautiful box!
Great craftsman, very very informative! Keep up the great videos!
@KingsFineWoodworking
7 жыл бұрын
Thank you!
Dry nice work. Thanks for the vid.
Beautiful....nice job!! Thanks
I am a new woodworker. Mostly a beekeeper and woodworking seem to go hand in hand. I like your channel.
Great job! I too struggle with over-gluing and over-clamping myself.
@LoneWolf-yp2mo
4 жыл бұрын
It's a LOT better than seeing a loose fit or cracked piece of wood. Glue is CHEAP !!
CRACKING JOB,BRILLIANT.
Amazing work KFW!
Beautiful box.
Great project n video all around !!!
Love it.... I think I will make one next
great video and beautiful box.
Beautiful work
Love it, wonderful job.
@KingsFineWoodworking
7 жыл бұрын
Thank you!!
a master of his craft...
Just chanced on your channel. Like your approach to the work and good explanations of what you do and why. Thats a nice looking box
@KingsFineWoodworking
6 жыл бұрын
Thank you very much.
your work is very inspiring thank you so much
Extremely nice Sir!
That is really nice!!
Beautiful project
Beautiful Box
Wow!! Beautiful work! -really enjoy your most informative explanation on the finishing applications. Can't wait to begin this project -(I wonder how many beta/revisions I'll need☺) Job well done!
Beautiful!
one very nice wooden box,it will last a long long time,exquisitely made,gets my thumbs up
@KingsFineWoodworking
6 жыл бұрын
Thank you!
Nice work.. I like your tools very match
As always a lovely job
@KingsFineWoodworking
7 жыл бұрын
Thank you very much.
Really nice work , beautiful box---
@KingsFineWoodworking
7 жыл бұрын
Thank you! I appreciate it.
Magnificent result and a pleasure to watch.
@KingsFineWoodworking
Жыл бұрын
Thank you!
Absolutely stunning James! I am building a box kind of like this with half blind dovetails. Was wondering how I was going to do the top. Dont have a raised panel bit, but I do like the bevel idea for added aesthetics! Thank you very much!
Excellent!
Nice job!
Beautiful
Very enjoyable to watch!! My only problem is...it’s 11:00 pm and now I want to go out to the shop! Lol. Thanks again!
Great video! Tons of tips in here!
@KingsFineWoodworking
7 жыл бұрын
Thank you! Do you know Dracula?
@VampireOnline
7 жыл бұрын
King's Fine Woodworking haha
Beautiful work. I don't know about the look of a door as the lid. But the dip the screws in paste was was bloody brilliant. Nice work. Also the cutting the lid on the band saw, first time I have seen that, but it obviously worked out great.
I learned a bit by watching this. I like the die trick for the finish. Nice box.
@KingsFineWoodworking
6 жыл бұрын
Thank you!
Fantástico...congratulation!
You are my hero!!!!!!!
Beautiful job ! BTW ... glue is CHEAP, much better than a crack or split in a finished product a month or year down the road !! Continue your superb work my friend !! I just added this to my bucket list !! Thanks for a great video !!
Perfect Sir, very nice!!!!!
@KingsFineWoodworking
7 жыл бұрын
Thank you so much!
Very nice job!
@KingsFineWoodworking
6 жыл бұрын
Thank you!
That's a good quality build although I must admit I am not personally keen on the two wood bottom, which I would have built out of a single color wood to match the box. But that's a personal choice. Always great to see your videos.