Episode 1606 sent into the channel for review Buy: www.banggood.com/FNIRSI-DSO15... Be a Patron: / imsaiguy
Жүктеу.....
Пікірлер: 87
@spudhut22468 ай бұрын
hilarious - I have been looking at all these testers the past few days. Thank you for doing these videos, the reviews are very informative. I appreciate that you are to the point with these testers, no beating around the bush. Pure experience to honesty to the functions it says it should provide.
@iowahank110 ай бұрын
Great ringtone. Oh, and the scope is a nice upgrade from a DS0138.
@scottdrake515910 ай бұрын
Wonderful video! All of your videos are great, and yours might be the only YT channel that I can say that about.. This fulfills another wish I had, besides low cost. I am excited for more scopes, or other instruments, that don't need to connect to mains.
@IMSAIGuy
10 ай бұрын
Thanks Scotty. Good to see you are still a viewer!
@__--JY-Moe--__10 ай бұрын
U'r fired! 5min early! looks perfect 4 any small electronics sampling & testing!
@NitroNuggetTV9 ай бұрын
I think this might be an ideal tool for setting gains on audio amplifiers. Cheap and cheerful. Useful video, thank you.
@_N4VE_
22 күн бұрын
bull shit, i’ve been trying and can’t get the sine wave to show like other people do
@jimomertz10 ай бұрын
Might be useful for checking Hall effect sensors on my car. Wouldn’t want to drag my expensive oscilloscope out to the garage and risk getting it all dirty or broken.
@MrMersh-ts7jl
10 ай бұрын
I'm an auto tech and having a really cheap one channel battery scope is very useful.
@E-Box
10 ай бұрын
You definitely don't want your scope turning into one of those "pulled from working environment" eBay units where the "working environment" seems to be under the hooves of many cows in a barn.
@DrFiero
10 ай бұрын
Exactly what I was going use one for! See if your cam sensor is pulsing (or whatever), and it's plenty fast enough to check if the CAN bus is alive.
@AnnaVannieuwenhuyse
4 ай бұрын
This one won't even get dirty, 'cause it fits right in your front pockets!
@stefanberggren770
2 ай бұрын
Would this too work to check pickup coil AC voltage on a motorbike?
@S13Slydeways6 ай бұрын
Ty for the unbias review! I bought for exactly the reason of room/shop swapping. Ill program in my comfy room, when i need to quickly check low freq comms, or even just snap shot a voltage reading and a curve. ill use this. Would hate to drag out the riglol on a field mission to just to confirm its dacing and not dead. Haha
@reiisthebestgirl10 ай бұрын
This seems like fine companion to Hantek 1008 I have used for years to work on cars. Single channel and sampling rate are limiting capabilities but it being small stand alone device is great to get a quick read from some sensor when you dont want to set up the Hantek.
@leandrolaporta219610 ай бұрын
I did a review of this a month ago in my channel and I really liked it, it is fast for the price! For audio usage and mains measure (using the 10x probe obviously) is quite neat!
@theprogrammerrolandmc3039
5 ай бұрын
your comment is against KZread rules just provide a link next time why are you trolling other videos
@alklapaxida85010 ай бұрын
I CANT BELIEVE ITS 25 BUKS ! waw that blows my mind, this unit is great for on the car use or under bonnet stuff wear you get it covered in oil and soot so many uses such amazing value when i was a young dude i would fantasize about oscilloscopes and could not get one ...
@stewartclark325910 ай бұрын
I'm astounded at the value! that much performance for $25 is really good. Even with a 200kHz analogue bandwidth (which I'm sure is limited by an input filter that could be 'adjusted'😂, it's really great for situations you mention. Heck, you could even use it to explain aliasing and digital down-conversion with a 455KHz IF AM radio. How to use a scope and how to interpret the waveform is 80% of mastery. I'd pay an extra $5 for a trigger input that doubled as a 1-ch logic analyzer. Really cool!
@surferdudemi
10 ай бұрын
Bandwidth is likely limited by the internal A/D sample rate, so while you might be able to "adjust" the input filter, you would not gain much in terms of performance.
@paulperano923610 ай бұрын
I would have drooled over this when I was starting out in the late 70s !
@paulsherman51
9 ай бұрын
I did. And the drool immediately evaporated when landing on the tops of the vacuum tubes of my first 70s scope. This tiny thing would have been Unobtanium.
@yurkshirelad10 ай бұрын
For $25 a beginner can’t go wrong for basic electronics and audio work.
@marphymarphy10 ай бұрын
For 25USD its a great tool. U can check switching power suply, U can check comunication between PCH and BiOS chip, U can check linaerity of Ur suply, U can do many things. Especialy U can teach how to measure with osciloscope AND it is on battery, so U are out of grounding👌🏻
@pham3383Ай бұрын
i have been using this,this is enough for me with bachelor level of electronics,small,cheap,not even half bad comparing to those expensive ones
@surferdudemi10 ай бұрын
At 9:20 , it appears the problem with the sync pulse triggering is not the scope: it's either that the amplitude of the pulse varies, or (at 200mV / div) you're getting quantization error on the signal. That would make it appear to shift slightly. There also appears to be a little noise in the signal which could make it appear to shift.
@byronwatkins256510 ай бұрын
At 8:00 , the vertical ranges will probably depend on the probe attenuation. At 9:40 , triggering wasn't a problem -- the pulse train was stationary; the problem was the sampling frequency beating with the pulse frequency... instead of sampling at the peak it sampled half-way down on each side during some traces.
@surferdudemi
10 ай бұрын
There's also noise and possibly some quantization error at that scale (200mV)
@hunterwilliams283310 ай бұрын
Could be useful cause it’s not connected to mains ground. Being new to oscilloscopes and not having to worry about shorting out parts might be good.
@koenlefever10 ай бұрын
9:02 When you started talking about a "sync pulse" before zooming in, and I just saw the spikes, I assumed for a moment you were talking about some synchronization pulse. Then you zoomed in and I recognized the function as a "sinus cardinalis" sinc(x)=sin(πx)/πx, and I understood you were talking about a "sinc pulse" rather than a "sync pulse". BTW, according to the cc subtitles you talk about a "sink pulse", which briefly added to the confusion.
@aaax941010 ай бұрын
I learned without an oscillicope but i use em now ha
@garylcampАй бұрын
Actually, it did say it was calibrating on screen but it was brief. Watch your video. I just got mine today and it looks great. I wish you would have gone to a little more detail. I cant get to connect to my PC (W10 sees it but says it is malfunctioning). The instructions are not at all clear to me. And I would like to update the firmware. Some other youtuber fixed an old Commador 64 with 4 problems using this. And I would like to see if this DSO152 would project to the PC screen. Thanks for the review.
@stevenspmd10 ай бұрын
Wonder if its source is open like the original DSO Shell ?
@brianmccafferty1470Ай бұрын
I bought one to try to iDenify the wires for my obd2 connector. The port broke apart in my hands!
@onesikm39 ай бұрын
So what is the crosshair “trigger” you referenced on the sides ? I thought it was going to let me shift the wave along the “Y” axis but it does not ? Basically I’m trying to use this for checking a 40hz sine wave for setting my amplifier gain but I’m not able to keep the image within the confines of the screen? I’ve tried to slow it down and get it the smallest but it’s not helping🤔
@gigas27
9 ай бұрын
Funny enough had the same issue today when i thought this would work. I'm at a loss and looking for answers too...
@niteman5557 ай бұрын
Nearly forgot what a sinc was, I thought your generator could somehow generate a standardized vsync or hsync pulse😅
@FloydThomasIII5 ай бұрын
I bought this to simply test the sine/modified waves for inverters as some of the more expensive ones are listed as sine when in fact they're not. Still trying to figure it out though.
@IMSAIGuy
5 ай бұрын
inverter companies lie all the time
@restfulplace3273
2 ай бұрын
This is the very reason I’m looking. Now I need to know if this has enough resolution to be useful.
@FloydThomasIII
2 ай бұрын
@@restfulplace3273 It worked for my needs. Just remember that there's a switch on the side of the probe.
@glenncummings132610 ай бұрын
Surprised you didn't adjust it for a nice square wave
@Joe_BloАй бұрын
The case looks a lot like my 35y old Humminbird Fish Finder
@gabaradama144k95 ай бұрын
Can you use this to check Main ‘s voltages?
@Manf-ft6zk10 ай бұрын
I could think of high voltage experiments with high voltage probes where I would risk just 25$ to have look at the signals.
@roelandriemens10 ай бұрын
Now you don't need your Rigol anymore.😂
@ivolol10 ай бұрын
1Mhz would be nice, so you can look at boost / buck switchers. I would spend a bit more money for something you knew could do that. Yes it's a slippery slope of how fast to go, but eh these bare-CPU-ADC oscilloscopes are getting a bit old hat, and the interfaces are all sad to work with
@neonpop807 ай бұрын
Can I hook this up to my synths?
@DrFiero10 ай бұрын
For the price - it's amazing. As usual, it's the 'right tool for the right job'. You're certainly not checking the clock on a 5ghz clock signal with it. Wrong tool. It's WAY cheaper than the first 'cheap' DMM I bought in about 1979. Factor in inflation?! OMG.... SO much cheaper. Still have that meter BTW!
@JimmyKay19762 ай бұрын
Can this detect the positive and negative of an audio capacitor?
@philh92388 ай бұрын
Can you use any bnc scope leads? I have a pico lead but not sure if it would fit? I want to use it for automotive sensors and can bus etc but not crazy on the short lead’s like in the video
@IMSAIGuy
8 ай бұрын
should be able to use any BNC cable or probe
@philh9238
8 ай бұрын
@@IMSAIGuy They have a 1 channel scope for 200 but this thing is worth the gamble for 30 bucks in the automotive world.
@philh9238
8 ай бұрын
How would you go about the probe calibrating if you use different leads that don’t have the adjustable screw??
@IMSAIGuy
8 ай бұрын
@@philh9238 you will just have to live with the inaccuracy. for auto work that shouldn't be too bad
@tonypitsacota25136 ай бұрын
Hahahahaha.... "Won't Get Fooled Again" is a great spam ringtone you have....
@IMSAIGuy
6 ай бұрын
Baba O'Riley
@tomperli4513
4 ай бұрын
Yust a teenage wasteland 😂 @@IMSAIGuy
@pkp85597 ай бұрын
They have Chip Manufacturing facility. Its Most important thing..
@nikthefix8918
7 ай бұрын
Do you know which processor it's using? Could make a great dev machine if it's hackable. Nice ergonomics. You'd pay more than that for a decent production quality project case. Edit: Found it. CH32F103. It looks like there's a UART header too so the STM32-Arduino framework might be worth experimenting with.
@pkp8559
7 ай бұрын
@@nikthefix8918 AliExpress some European put review photos with opened view. from there i understand FPGA chip company started 2014 have their chip used.
@magnuswootton61815 ай бұрын
theres going high hz, but how low in hz does it go.
@IMSAIGuy
5 ай бұрын
6:50
@jeditoto344110 ай бұрын
Great video- was going to buy one , but looks really crappy
@IMSAIGuy
10 ай бұрын
that is why I make these videos, so you don't waste your money if this is not for you.
@suyutnoputra40555 ай бұрын
Saya beli dapat 1bulan rusak
@yornotelppa10 ай бұрын
Why are his prices always low? In this case it's not $25 it's at $33.
@IMSAIGuy
10 ай бұрын
did you do a search?
@yornotelppa
10 ай бұрын
@@IMSAIGuy just clicked your link.
@IMSAIGuy
10 ай бұрын
do a search I found $21
@JuanSanchez-ik7wx7 ай бұрын
120 vac would have been something a smart guy would have done.
@IMSAIGuy
7 ай бұрын
220 vac would have been something a very smart guy would have done
@JuanSanchez-ik7wx
7 ай бұрын
@@IMSAIGuy unless you have a broken neutral wire in your box. But you wouldnt know the repercussions of that.
@jeffreywyke36810 ай бұрын
Too bad it's from Bangbad
@sammin5764
10 ай бұрын
👍🌟🌷🌟
@kenbakker32414 ай бұрын
Might I suggest that you oil your squeaky chair.
@IMSAIGuy
4 ай бұрын
I'm buying a new one. tried to fix that one way too many times
@briansauk683710 ай бұрын
Even in the space of cheap crippled pocket scopes, this looks terrible. Pass.
Пікірлер: 87
hilarious - I have been looking at all these testers the past few days. Thank you for doing these videos, the reviews are very informative. I appreciate that you are to the point with these testers, no beating around the bush. Pure experience to honesty to the functions it says it should provide.
Great ringtone. Oh, and the scope is a nice upgrade from a DS0138.
Wonderful video! All of your videos are great, and yours might be the only YT channel that I can say that about.. This fulfills another wish I had, besides low cost. I am excited for more scopes, or other instruments, that don't need to connect to mains.
@IMSAIGuy
10 ай бұрын
Thanks Scotty. Good to see you are still a viewer!
U'r fired! 5min early! looks perfect 4 any small electronics sampling & testing!
I think this might be an ideal tool for setting gains on audio amplifiers. Cheap and cheerful. Useful video, thank you.
@_N4VE_
22 күн бұрын
bull shit, i’ve been trying and can’t get the sine wave to show like other people do
Might be useful for checking Hall effect sensors on my car. Wouldn’t want to drag my expensive oscilloscope out to the garage and risk getting it all dirty or broken.
@MrMersh-ts7jl
10 ай бұрын
I'm an auto tech and having a really cheap one channel battery scope is very useful.
@E-Box
10 ай бұрын
You definitely don't want your scope turning into one of those "pulled from working environment" eBay units where the "working environment" seems to be under the hooves of many cows in a barn.
@DrFiero
10 ай бұрын
Exactly what I was going use one for! See if your cam sensor is pulsing (or whatever), and it's plenty fast enough to check if the CAN bus is alive.
@AnnaVannieuwenhuyse
4 ай бұрын
This one won't even get dirty, 'cause it fits right in your front pockets!
@stefanberggren770
2 ай бұрын
Would this too work to check pickup coil AC voltage on a motorbike?
Ty for the unbias review! I bought for exactly the reason of room/shop swapping. Ill program in my comfy room, when i need to quickly check low freq comms, or even just snap shot a voltage reading and a curve. ill use this. Would hate to drag out the riglol on a field mission to just to confirm its dacing and not dead. Haha
This seems like fine companion to Hantek 1008 I have used for years to work on cars. Single channel and sampling rate are limiting capabilities but it being small stand alone device is great to get a quick read from some sensor when you dont want to set up the Hantek.
I did a review of this a month ago in my channel and I really liked it, it is fast for the price! For audio usage and mains measure (using the 10x probe obviously) is quite neat!
@theprogrammerrolandmc3039
5 ай бұрын
your comment is against KZread rules just provide a link next time why are you trolling other videos
I CANT BELIEVE ITS 25 BUKS ! waw that blows my mind, this unit is great for on the car use or under bonnet stuff wear you get it covered in oil and soot so many uses such amazing value when i was a young dude i would fantasize about oscilloscopes and could not get one ...
I'm astounded at the value! that much performance for $25 is really good. Even with a 200kHz analogue bandwidth (which I'm sure is limited by an input filter that could be 'adjusted'😂, it's really great for situations you mention. Heck, you could even use it to explain aliasing and digital down-conversion with a 455KHz IF AM radio. How to use a scope and how to interpret the waveform is 80% of mastery. I'd pay an extra $5 for a trigger input that doubled as a 1-ch logic analyzer. Really cool!
@surferdudemi
10 ай бұрын
Bandwidth is likely limited by the internal A/D sample rate, so while you might be able to "adjust" the input filter, you would not gain much in terms of performance.
I would have drooled over this when I was starting out in the late 70s !
@paulsherman51
9 ай бұрын
I did. And the drool immediately evaporated when landing on the tops of the vacuum tubes of my first 70s scope. This tiny thing would have been Unobtanium.
For $25 a beginner can’t go wrong for basic electronics and audio work.
For 25USD its a great tool. U can check switching power suply, U can check comunication between PCH and BiOS chip, U can check linaerity of Ur suply, U can do many things. Especialy U can teach how to measure with osciloscope AND it is on battery, so U are out of grounding👌🏻
i have been using this,this is enough for me with bachelor level of electronics,small,cheap,not even half bad comparing to those expensive ones
At 9:20 , it appears the problem with the sync pulse triggering is not the scope: it's either that the amplitude of the pulse varies, or (at 200mV / div) you're getting quantization error on the signal. That would make it appear to shift slightly. There also appears to be a little noise in the signal which could make it appear to shift.
At 8:00 , the vertical ranges will probably depend on the probe attenuation. At 9:40 , triggering wasn't a problem -- the pulse train was stationary; the problem was the sampling frequency beating with the pulse frequency... instead of sampling at the peak it sampled half-way down on each side during some traces.
@surferdudemi
10 ай бұрын
There's also noise and possibly some quantization error at that scale (200mV)
Could be useful cause it’s not connected to mains ground. Being new to oscilloscopes and not having to worry about shorting out parts might be good.
9:02 When you started talking about a "sync pulse" before zooming in, and I just saw the spikes, I assumed for a moment you were talking about some synchronization pulse. Then you zoomed in and I recognized the function as a "sinus cardinalis" sinc(x)=sin(πx)/πx, and I understood you were talking about a "sinc pulse" rather than a "sync pulse". BTW, according to the cc subtitles you talk about a "sink pulse", which briefly added to the confusion.
I learned without an oscillicope but i use em now ha
Actually, it did say it was calibrating on screen but it was brief. Watch your video. I just got mine today and it looks great. I wish you would have gone to a little more detail. I cant get to connect to my PC (W10 sees it but says it is malfunctioning). The instructions are not at all clear to me. And I would like to update the firmware. Some other youtuber fixed an old Commador 64 with 4 problems using this. And I would like to see if this DSO152 would project to the PC screen. Thanks for the review.
Wonder if its source is open like the original DSO Shell ?
I bought one to try to iDenify the wires for my obd2 connector. The port broke apart in my hands!
So what is the crosshair “trigger” you referenced on the sides ? I thought it was going to let me shift the wave along the “Y” axis but it does not ? Basically I’m trying to use this for checking a 40hz sine wave for setting my amplifier gain but I’m not able to keep the image within the confines of the screen? I’ve tried to slow it down and get it the smallest but it’s not helping🤔
@gigas27
9 ай бұрын
Funny enough had the same issue today when i thought this would work. I'm at a loss and looking for answers too...
Nearly forgot what a sinc was, I thought your generator could somehow generate a standardized vsync or hsync pulse😅
I bought this to simply test the sine/modified waves for inverters as some of the more expensive ones are listed as sine when in fact they're not. Still trying to figure it out though.
@IMSAIGuy
5 ай бұрын
inverter companies lie all the time
@restfulplace3273
2 ай бұрын
This is the very reason I’m looking. Now I need to know if this has enough resolution to be useful.
@FloydThomasIII
2 ай бұрын
@@restfulplace3273 It worked for my needs. Just remember that there's a switch on the side of the probe.
Surprised you didn't adjust it for a nice square wave
The case looks a lot like my 35y old Humminbird Fish Finder
Can you use this to check Main ‘s voltages?
I could think of high voltage experiments with high voltage probes where I would risk just 25$ to have look at the signals.
Now you don't need your Rigol anymore.😂
1Mhz would be nice, so you can look at boost / buck switchers. I would spend a bit more money for something you knew could do that. Yes it's a slippery slope of how fast to go, but eh these bare-CPU-ADC oscilloscopes are getting a bit old hat, and the interfaces are all sad to work with
Can I hook this up to my synths?
For the price - it's amazing. As usual, it's the 'right tool for the right job'. You're certainly not checking the clock on a 5ghz clock signal with it. Wrong tool. It's WAY cheaper than the first 'cheap' DMM I bought in about 1979. Factor in inflation?! OMG.... SO much cheaper. Still have that meter BTW!
Can this detect the positive and negative of an audio capacitor?
Can you use any bnc scope leads? I have a pico lead but not sure if it would fit? I want to use it for automotive sensors and can bus etc but not crazy on the short lead’s like in the video
@IMSAIGuy
8 ай бұрын
should be able to use any BNC cable or probe
@philh9238
8 ай бұрын
@@IMSAIGuy They have a 1 channel scope for 200 but this thing is worth the gamble for 30 bucks in the automotive world.
@philh9238
8 ай бұрын
How would you go about the probe calibrating if you use different leads that don’t have the adjustable screw??
@IMSAIGuy
8 ай бұрын
@@philh9238 you will just have to live with the inaccuracy. for auto work that shouldn't be too bad
Hahahahaha.... "Won't Get Fooled Again" is a great spam ringtone you have....
@IMSAIGuy
6 ай бұрын
Baba O'Riley
@tomperli4513
4 ай бұрын
Yust a teenage wasteland 😂 @@IMSAIGuy
They have Chip Manufacturing facility. Its Most important thing..
@nikthefix8918
7 ай бұрын
Do you know which processor it's using? Could make a great dev machine if it's hackable. Nice ergonomics. You'd pay more than that for a decent production quality project case. Edit: Found it. CH32F103. It looks like there's a UART header too so the STM32-Arduino framework might be worth experimenting with.
@pkp8559
7 ай бұрын
@@nikthefix8918 AliExpress some European put review photos with opened view. from there i understand FPGA chip company started 2014 have their chip used.
theres going high hz, but how low in hz does it go.
@IMSAIGuy
5 ай бұрын
6:50
Great video- was going to buy one , but looks really crappy
@IMSAIGuy
10 ай бұрын
that is why I make these videos, so you don't waste your money if this is not for you.
Saya beli dapat 1bulan rusak
Why are his prices always low? In this case it's not $25 it's at $33.
@IMSAIGuy
10 ай бұрын
did you do a search?
@yornotelppa
10 ай бұрын
@@IMSAIGuy just clicked your link.
@IMSAIGuy
10 ай бұрын
do a search I found $21
120 vac would have been something a smart guy would have done.
@IMSAIGuy
7 ай бұрын
220 vac would have been something a very smart guy would have done
@JuanSanchez-ik7wx
7 ай бұрын
@@IMSAIGuy unless you have a broken neutral wire in your box. But you wouldnt know the repercussions of that.
Too bad it's from Bangbad
@sammin5764
10 ай бұрын
👍🌟🌷🌟
Might I suggest that you oil your squeaky chair.
@IMSAIGuy
4 ай бұрын
I'm buying a new one. tried to fix that one way too many times
Even in the space of cheap crippled pocket scopes, this looks terrible. Pass.