Charlotte It's yours and Roy's Farm you do what you want, and you will always get the couch critics who have nothing better to do than argue why have you done one this way one that way... As long as the cows are healthy and happy with the setup you are going to be using that's all that matters...

Your videos make me smile

Your shed so you and Roy decide. 😅😊 We just love ❤️ 😍 you and your videos. Good luck with the Cow Palace.😊

@charlotteashleyfarm

2 ай бұрын

Thank you lovely your always so supportive x x x

The way you explained where the panels are and why makes perfect sense. I’ve loved every second of watching this wonderful shed come together. Looking forward to seeing it full of cows.

@charlotteashleyfarm

2 ай бұрын

Glad it was helpful! And thank you ever so much

Nice vid lass its getting on fast now carnt wait to see the moo moos ok be safe

Great ear knowing two lambs were struck in the hedge from the bathroom, impressive 😂.

"I'll let her in the car".... you're too kind 😮😉 Poor mommy... 😊 And another secret Jagged Little Pill ending... 😂

The correct answer is the way u want to do it as it's your shed Charlotte

I am so looking forward to seeing the shed finished and the robots all working

The hypnotizing black screen at the end again

@charlotteashleyfarm

2 ай бұрын

Oops I

Great job changing the spike, I know a lot of men that can’t undo one of them. Not long until cows arrive

Let them talk Charlotte, the panels on both sides of the shed are in the RIGHT place. Your explanation makes perfect sense.

A gem of a video great to see the robots in and great to see how you look after your animals especially the little lambs 👍🏻🇮🇪☘️

Hello my dear. Its your shed, Do it YOUR way, robots are going to be very snazzy when they are full in, looking forward to seeing them working. I did not envy you going between the hawthorn and the barbed wire, just as well your not my size. Take care. Witchy. X

Sorry to say this charlotte, ive added comments in the past, including the panels on one side of the shed, but both are wrong- blocks laid inbetween the uprights would have resulted in a clear run on the food and dung sides. Any silage pusher on the floor fed side has got to contend with the stantions sticking out, removing waste a hand job. Youre creating extra jobs for yourselves, believe me honestly. Theres a lot, a hell of a lot to learn yet, work to do day in day out. Dairy farming is one of the hardest jobs going. But also one of the most rewarding at times, thats why i loved it for over 35 yrs.

@charlotteashleyfarm

2 ай бұрын

Did consider shuttering between the girders but the gap is 15 inches before the thickness of the steel, would you have shuttered that thick?

@ipfreely10001

2 ай бұрын

@charlotteashleyfarm sorry didn't realise the gap was that much, so obviously blocks wouldn't fit- but yes, I would have shuttered it and poured concrete, bars drilled in the ground, so both sides were smooth to scrape, feed against. I know it would've cost more than using the pre cast concrete panels but it's a once a life time and beyond job.

Love it !! 😂😂 When you were saying about the panels 😂😂 I was thinking exactly what you were saying 😂😂 Love the shed , looking forward to seeing your Jersey Girls !! Keep us smiling Charlotte 😁 x

Your sheds coming along great charlotte keep up the amazing videos . Xx

Omg nearly there, well done Charlotte and Family and everyone else involved with the parlour. It looks amazing 👍👍

You will always get a few who think they know best, but at the end of the day you do it as you want. Keep the video's coming, on the crapiest days you put a smile on my face, wouldn't be the same with out your videos.

Hi Charlotte, I am one of those who got onto you about the panels. Good explanation for why you went with the 2 different ways of placing them. I would have put both sides on the outside. On the inside of each panel I would have fixed a length of rubber the width of what was left in the rsj and the length of each panel to give the cows more comfort while they are standing eating. The rubber would have given you a straight line then for scrapping out the slurry. But, at the end of the day, it is what works best for you.The shed is looking amazing. I'm looking forward to seeing your cows in it.

@charlotteashleyfarm

2 ай бұрын

😂😂😂

Great update Charlotte! Everything is coming together very nicely - hope your nose settles down ok

@charlotteashleyfarm

2 ай бұрын

It did I only looked silly for a day

14 minutes of pure scattyness! Love it, also exciting the robots are in! 😂

@charlotteashleyfarm

2 ай бұрын

Glad you enjoyed! I will sit down and talk at a normal speed one day

@MachineryNation

2 ай бұрын

@@charlotteashleyfarm please don’t! 😂

So you can tell us in six months which way round you prefer the panels. Your shed; your choice. 👍

@charlotteashleyfarm

Ай бұрын

Well actually I did a video today I’m so so pleased I didn’t put them on the outside on both sides it’s a PAIN to get round the steels with the scraper

What a milestone congratulations🥳🥳🤠🤠🐮🐮🎉

Reminds me of a campaign for men's testicular cancer that had posters in site toilets ... "Check your nuts daily ... " Thanks for the clarification of the panels.

the view from the top of the robot house needs a permanent camera so you can add in b roll of things that happen while you are away. looks a great view and looks a stunning shed. on the panels put them in how you want/need them if needed on a quiet day move em. thanks for sharing

I was going to correct you when you said bolt when it was a nut you were looking for but then I heard what you said about the concrete beams and I had second thoughts about doing that 😂😂. Doesn’t the shed look well with the robots in place and you now have a big space in your store to fill again 😂. Great video Charlotte. The big day is getting closer. I hope we are all invited for the opening 😂

Really getting exciting. 😊

The great panel debate😂😂. They should be on the outside the cows front feet will pull any sh1t away as they move back so wont be a problem scraping then the feed side is easy to scrape old feed away.

What's the song you always use please. It's really catchy. Doing a good job really enjoying your journey to milking cow's. Same thing I do every day

A good explanation.

Still can't work out how many years it's going to be before they start making a profit from dairy cows, especially as the market is hard to make money from milk .

@charlotteashleyfarm

2 ай бұрын

It’s a good job we’re doing the accounts then and not you 😂😂😂

I think the panel should be on the outside you are making your self a lot of work keeping the feed fresh it all litre milk produced,not whether you can show of like lewis Hamilton with the scraper🤣

@charlotteashleyfarm

2 ай бұрын

I disagree

Very clear explanation of why the panels are placed where they are. 10/10

Great video Charlotte

Check yer nuts daily 😅😂 Eek Hope you don't get black eye!!! Shed looks awesome well done Xx

Awesome taking good care of the little lambs. Who am I to tell you guys how to set up your farm.

Good evening Charlotte

@charlotteashleyfarm

2 ай бұрын

Good morning!

Robots in da house, yaay

Charlotte, you are right as always

No idea if it would work but what about some kind of small barrier or 'cap' around the base of the uprights to stop feed gathering in the I shape? Might help save time cleaning🤷🤔 end of the day your are damned if you do and if you don't so go with what you feel is going to best for you, it's your cow palace no one elses❤

I say on the inside is better that way like you said faster way of cleaning an keeps the feed out the rain

Plenty of running your mother or you haha, your shed how it works for you! Blacks eyes? With lambing running around making the shed ready, meetings down south! Borrow Joe seels make up! Great blog! Robots WOW

I think you know your shed better than anyone else and ignore keyboard warriors.

I thought you got a red nose from drinking Merlot, not driving Merlo. 😂

@charlotteashleyfarm

2 ай бұрын

Ha ha ha ha ha I wish I could tell you I drink but I don’t

and also you got a wider road

@charlotteashleyfarm

2 ай бұрын

Did I??

I'm afraid that ratchet wrenches should not be used to break nuts,or bolts lose,it puts too much stress on the ratchets,a breaker bar is best to start loosening.Also it is best to use a wire brush,and rust remover on the threads first

@charlotteashleyfarm

2 ай бұрын

Feel free to come over and do it for me

'To me, to you' didnt go down well 😂

@charlotteashleyfarm

2 ай бұрын

BAHAHAHAHAHAHA they were good sports

do the jersey cows need hoof trimming ?

Even the colour of the nuts match your coat, always check your nuts 😂

great video misses just so you know i didnt winge about your panels so i should get a gold star but im still of the opinion your stil bat shit crazy but i love ya both

Lol Ur stressed 😅😅😅, inside or outside if it works it works, that what I say 😅😅😅

Well, I'd have put the panels in the middle of the beams, but I'm an arse, luv n stuff 😁

@charlotteashleyfarm

2 ай бұрын

😂😂😂😂😂😂

NUT not bolt pet. They are encouraging us to do that for a few quid in subs as well but after watching the hardship you are after getting with the double fence they can keep their few quid. Just one daft question when the guys fire up the robots after they are fitted,do they supply the fibreglass cow that they have at the shows to check that everything is working since you don’t have any cows yet? Got ya ! Regards from Ireland,oh and don’t worry about the armchair experts opinions are ten a penny.

What was the 5 minutes of black screen at end then a tad of music?? I thought panels inside so flat to scrap along

@charlotteashleyfarm

2 ай бұрын

It’s when I accidentally leave a bit of sound at the end of the video

You tell them

It was not meant to be a criticism,just a general rule to protect wrenches everywhere

@charlotteashleyfarm

2 ай бұрын

😂😂😂😂😂😂

Opinions are like A**holes, everybody has one and they are all full of Sh*t.😂❤

A clairvoyant?

lol...i put my hand up as being corrected on the panels being placed on outside, i was uninformed and obviously stand the risk of being put on notice😎😎😎

@charlotteashleyfarm

2 ай бұрын

😂😂😂 you should know I have an answer for everything

Please tell me you’re going to name the robots Neil and Buzz after the astronauts, or something to that effect 😅

@charlotteashleyfarm

2 ай бұрын

After the national lottery machines 😂😂😂

If you can find a spot for a viewing platform I am sure you will find it useful. You are bound to have visitors at some point (I don't mean members of the public)

@phil6465

2 ай бұрын

That’s what the window in the office is for!!

@charlotteashleyfarm

2 ай бұрын

The balcony is staying like that only the office is being bricked up x

Not going to comment on the famous Black Screen from 14:50 - you must be getting VERY tired.

@charlotteashleyfarm

2 ай бұрын

Lol you got it in one

Just to add to options,why don't you get some rubble to make a feed passage on outside ,got to be cheaper and simpler than feedbelt and don't breakdown or wear.😂😂😂😂😂😂😂😂

@charlotteashleyfarm

2 ай бұрын

Ahh but the road round would cost a lot of money and over time the trip round the shed would add up

@iainhowie6694

2 ай бұрын

@charlotteashleyfarm rubbles cheap even over time,only needs to be keenan width minus a metre already there as panels would be inside stanchion,sure alot off make up would be old stuff round yard already ,reverse down with keenan is easy enough doesn't need concrete,just hard-core apart from metre already concreted,guess saving 40k

The daily lamb wrestling match?

Panel keyboard warriors No idea of real life . Great to see the robots in place🎉🎉🎉 Good shed colour co-ordination 👏👏

@charlotteashleyfarm

2 ай бұрын

Thank you so much 😀

2nd

@charlotteashleyfarm

2 ай бұрын

Wheyyyy

Hi. I can't believe how many people think they are experts!! I'm sure you have thought about it & sorted what you think is best for you & your cows. Shut Up people & just enjoy the channel 😊👏🐄🤩

@charlotteashleyfarm

2 ай бұрын

Ha ha ha well said that woman x x x x

You know in the Summer when the Cows are in the Field and have a poo and all the flies just appear from seemingly nowhere? They're Keyboard Warriors in a previous life on KZread. 😹😹

@charlotteashleyfarm

2 ай бұрын

I love this 😂😂😂

Passage is too wide for cows

@charlotteashleyfarm

2 ай бұрын

LOL you make me larffffffrr

hopefully im first ❤

@charlotteashleyfarm

2 ай бұрын

You were x x

@ianwright7056

2 ай бұрын

@@charlotteashleyfarm sorry im slow im sleep deprived! charlotte you got plans on weekend?

You will have to sue the Merlo for assault!

@charlotteashleyfarm

2 ай бұрын

Honestly it’s proper clobbered me 😄😂😂😂

how often does the robots flush themselves out and the pipework taking the milk to the tank.......is it after every cow milked or once an hour ???........with a conventional parlour you wash out at the end of each milking and what about the detergent......all automated i suppose.........if it flushes out after every cow it's going to use a lot of water. every woman's biggest nightmare.........a prickly bush😂😂

@charlotteashleyfarm

2 ай бұрын

LOL your not wrong it was a gooseberry that really got me 😅😅 every cow it washes out after and yes it’s a LOT of water

@geraldbeard856

2 ай бұрын

@@charlotteashleyfarm oh blimey..........the next thing you will need to look into will be a borehole then !!! also it's extra water going into slurry store which has to be stored and then tankered out

Sorry

@charlotteashleyfarm

2 ай бұрын

What for

@spursnut56

2 ай бұрын

@@charlotteashleyfarm being an old timer having 40 years I suggested it would be better to have the panels on the inside for ease of cleaning thinking I knew better than you instead of trusting you and Roy to know except what you are doing

Charlotte, as a BBQ cook off winner, will you now be promoting BBQ Ben's BBQ Rub, massage oil and lube?. 😅😅😅😊😊😊❤❤❤❤

@charlotteashleyfarm

2 ай бұрын

ha ha ha ha ha ha ha ha ha