1990 17' Bass Tracker and a 2005 Sea-Doo 155 Wake Edition build video. Music credit by: / lostinscores
Жүктеу.....
Пікірлер: 87
@yrdGBA2 жыл бұрын
Definitely one of the cleanest builds I've seen, great job
@gradyvago54265 жыл бұрын
Awesome build, awesome boat, awesome skills, great Video...you rock!!!
@H2R-Express Жыл бұрын
I've watched a ton of jet Jon videos looking for the needed inspiration to destroy a Kawasaki ultra and your video by far has done it for me, beautiful design... Thank you and 👍 awesome boat
@matthewlee26866 жыл бұрын
man thats some damn good work I built one about three years ago with a 75hp Yamaha theyre are fun as hell im gonna build another one next winter.
@oneida801006 жыл бұрын
Thanks for all your documented builds. Your builds inspired me and I have started my own.
@johnnyanderson4464
6 жыл бұрын
oneida80100 it really looks easy to do
@springwater4032 жыл бұрын
Are you still building boats?
@1267josh Жыл бұрын
I would love to know how you fastened the drive to the hull.
@officialWWM6 жыл бұрын
The only problem I see with this is that I wouldn't be doing much fishing...too much fun getting there, lol.
@jerrybrantley24286 жыл бұрын
Nicely done
@0707moto6 жыл бұрын
By far best one
@djbassin30426 жыл бұрын
Bad ass builds bro.
@dirtbagfishing26485 жыл бұрын
Badass man, sick look
@erikjackola67636 жыл бұрын
i like it! great job
@deanhoch21136 жыл бұрын
That thing is a fucking beast great job man
@jsjrspivey5 жыл бұрын
Wow would trim tabs with a nozzle trim tilt help cavitation!
@trainbobber034 жыл бұрын
How do you marry the fiberglass with the aluminum when joining the sea doo section to the Jon boat, especially without getting leaks? What do you use?
@chud3273 жыл бұрын
love it
@matthewscheimer23875 жыл бұрын
What is the average height of your engines from hull to top/ deck
@aaaaaasssssqqqqq4 жыл бұрын
Have you hit anything with this boat where you added the water intake? Or ran a ground?
@edredfish5 жыл бұрын
I am beginning a build my self by chance can you tell me your measurement from transom to the front of motor.
@robgregg61634 жыл бұрын
Great build!! what model jet ski should a guy be looking for? Thanks
@scotyeg33136 жыл бұрын
These builds are amazing ! Do you get them inspected and registered after the jet install ? Or do you just take the chance ?
@jeffhardie77713 жыл бұрын
What did you use on the bottom of your Jon boat I want to protect it for small sand and gravel when I beach It on sand bars I travel all year on the Mississippi river and Minnesota river
@Richierich12854 жыл бұрын
nicely done i would of went with a steering wheel and a hot foot but
@tylerrichards78886 жыл бұрын
Do you build and sell any of these boats?
@jeffhardie77713 жыл бұрын
I like what you have done to your Jon Boat, I have a job boat what kind of under coat Did you use? I'm want to do the bottom to help protect it from small rock and scratch it up.
@anthonykontos7931 Жыл бұрын
Anyone know how far this was set motor was set from the transom?
@TsimonF4 жыл бұрын
Do you have plans for this stuff? This one has more power then some boats 4x it’s size
@Redbeard682e4 жыл бұрын
What's the top speed? Also fuel efficiency?
@bluecollarstudio85135 жыл бұрын
You have some amazing skills and patience for sure. What's the advantage of a jet boat in your neck of the woods? I owned the Winjet on Lake Mead for a few years which was powered by dual 2004 XP DIs. While those SeaDoos are amazing, that beast was such a pain in the ass to dock and get out of the harbor. I had to put on a trolling motor just to keep my wife from having a panic attack. The amount of gas it went thru daily was unreal, it could easily burn 4 gallons x 2 an hour and Lake Mead is massive. My 20' pontoon w a '95 115hp Evinrude 2 stroke is only slightly slower than the Winjet's dual 130hp motors.
@baconboy7697 Жыл бұрын
I have a 94 tx 17 bass tracker. How much does it cost to do a build like this.
@BladeRunner.433 жыл бұрын
How did you seal it up
@tylerbuley3546 Жыл бұрын
How much did it cost to build it wanting to make my boat a jet John and make it nice like yours
@jsjrspivey6 жыл бұрын
How much how fast?
@karlsoffroad8609 Жыл бұрын
Looks like you're on Black River? Building one soon for this exact reason, river gets low and I wanna go! Lol
@chaynease84956 жыл бұрын
Do you have a Facebook page or a way that someone could get ahold of you to talk?
@tublisthao17983 жыл бұрын
How much if you build one
@buckwild65525 жыл бұрын
I want to buy this boat?
@thomasbarlow42234 жыл бұрын
Super sweet but I feel like the bed liner on the outside of the hull is definitely robbing you of speed.
@TheStephenspann275 жыл бұрын
Any drawbacks to putting bedliner on the bottom of the hull other than added weight? I don't see it adding drag, it should actually break surface tension.
@scuba5904
5 жыл бұрын
No draw backs that I have experienced.
@deanhoch21136 жыл бұрын
How do you deal with cavitation issues I have a 1436 and a Kawasaki 750ss Jet Ski that has 75 horse do you think that would be enough to get the boat bunch of gear plus the decking and three people on plane and be able to get up to a decent speed thanks again bud you got a real Talent
@scuba5904
6 жыл бұрын
lick mytoad on flat bottoms a spoon design has to be incorporated in front of the pump to help eliminate air from entering.
@ryanmccloughen59623 жыл бұрын
Righteous...how much$....for sale ??
@samuellevi91903 жыл бұрын
Bad ass
@buckwild65526 жыл бұрын
What would you charge someone with a 16’ boat and a 155hp waver runner to just to get in running in the boar I’ll build everything else?
@timwegman5776
5 жыл бұрын
Buckwild 65 he wrote somewhere in this post that he only charges $30 per hour to do this. That’s a great price in my opinion.
@brandonrone32304 жыл бұрын
What kind of wood and size did you use on building the decks? @sc_disign
@scuba5904
4 жыл бұрын
1/2" treated plywood
@BeastModeBaaron4 жыл бұрын
Wicked build. That motor have any issues keeping the stereo system going?
@jaycevessier7554
4 жыл бұрын
It shouldnt, we run 10x the systems on SXS's with no no issues
@oneida801006 жыл бұрын
SC designs, I know on a boat a few builds back you tried durabak.....Is that what you use now? Thanks
@scuba5904
6 жыл бұрын
oneida80100 no, the durabak did not stay on the bottom very well. It's fine for the sides but not the bottom. I'm actually using wetlander slick bottom paint now. It's made for boat bottoms.
@oneida80100
6 жыл бұрын
SC Designs, thanks for your response.....you saved me lots of work. I hope your future builds continue to be successful. I have study all you videos and read your builds on forums, most helpful!
@notafinancialadvisor80876 жыл бұрын
what happens when fish and game stop you with the boat certified to 60hp at best?
@scuba5904
6 жыл бұрын
wtf vids it's built under the homebuilt category registration here in GA, there is no HP restriction on inboard engines.
@Bradley20015 жыл бұрын
Can you pull a tube on one of these things?
@wyatterickson-sy2td
9 ай бұрын
Yeah you take a rope In between the handles on the back and then another connection to that rope
@redmanjd6 жыл бұрын
I assume the bedliner looking material was used as a sealer/paint/abrasion resistance but how much drag do you think that texture adds? Dont get me wrong 45mph in a jon boat is cooking
@scuba5904
6 жыл бұрын
Jeremy probably no more than a couple of mph
@Realmediamashup6 жыл бұрын
U polished that turd into a diamond.
@matthewlee26866 жыл бұрын
did you seal the bottom with fiberglass?
@scuba5904
6 жыл бұрын
matthew lee just the seams to make it smooth, the permanent bond is 3m 5200 and screws
@matthewlee2686
6 жыл бұрын
SC Designs aw hell that must be some bad ass stuff I know that 3m I used is awesome ill check in to that. thanks man.
@joshuarivera7622
6 жыл бұрын
Yea 5200 ain't no joke. Just have to make sure u give it sufficient cure time. It bonds and also seals from water like nothing else.
@robfite69095 жыл бұрын
Where do y’all ride on the flint river?
@scuba5904
5 жыл бұрын
Southwest GA
@robfite6909
5 жыл бұрын
I was just curious because we have a buddy with a house on blackshear and have ran up river from there.
@scuba5904
5 жыл бұрын
We run South of Albany from there down to make Seminole.
@enocrivera36986 жыл бұрын
Seems like nobody think about wires what about a pipe in an angle protecting you from wires that way it will deflect it on top of the boat and not cutting you in half
@timwegman5776
5 жыл бұрын
Enoc Rivera do you mean wires running across the river? Wow my friend was riding a dirt bike in the hills and someone had ran a strand of wire across the trees just the right height to hit him in his neck and cut 2” deep. He almost died and talks with a whisper now. So I’m alway paranoid of this when I ride now. Never heard anyone els talk about it.
@enocrivera3698
5 жыл бұрын
@@timwegman5776 Yeah you always have to think about stuff like that man some people are sick in the mind if you're going really fast in a river or a Creek and someone just for the heck of it have a wire across that Can't the capitaes you but if you put a pipe and a wire quarter on top so when people are sitting down rinding you've got wired is in your way is just going to the flicked it on top of you and not kill you
@deanhoch21136 жыл бұрын
How do you steer man i really wanna figure out how to make one nice fucking job love from oregon
@scuba5904
6 жыл бұрын
lick mytoad it's a push pull stick steer
@MrTonymusic6 жыл бұрын
How much would you charge to build me one of those?
@scuba5904
6 жыл бұрын
MrTonymusic I charge $30 hr., This build was 130 hrs. Customer supplies the jetski and the boat, material cost including the Stereo was $4100 for this build.
@lostinthewoodsangling2855
6 жыл бұрын
How are you attaching the jet ski to the bottom of the boat?
@timwegman5776
5 жыл бұрын
SC Designs that’s really reasonable price. I’m surprised your not just building them and selling as a finished product I would assume they would sell for closer to double that cost ($4100+$3900= $8k) $8k for one of these is amazing and I’m sure they could sell for $15-20k easy. Just my opinion. Btw this is one of the nicest jet Jon I’ve ever seen, very clean and professional build. Great job thanks for sharing.
@kevinharrison4192
3 жыл бұрын
@@timwegman5776 8k plus the Jon and ski... still good deal
@joshc85993 жыл бұрын
Build me one!!!
@pain_weaver3 жыл бұрын
Must not be building anymore. No more uploads
@999slinger3 жыл бұрын
Could a done without the music. Especially when you ran the motor
Пікірлер: 87
Definitely one of the cleanest builds I've seen, great job
Awesome build, awesome boat, awesome skills, great Video...you rock!!!
I've watched a ton of jet Jon videos looking for the needed inspiration to destroy a Kawasaki ultra and your video by far has done it for me, beautiful design... Thank you and 👍 awesome boat
man thats some damn good work I built one about three years ago with a 75hp Yamaha theyre are fun as hell im gonna build another one next winter.
Thanks for all your documented builds. Your builds inspired me and I have started my own.
@johnnyanderson4464
6 жыл бұрын
oneida80100 it really looks easy to do
Are you still building boats?
I would love to know how you fastened the drive to the hull.
The only problem I see with this is that I wouldn't be doing much fishing...too much fun getting there, lol.
Nicely done
By far best one
Bad ass builds bro.
Badass man, sick look
i like it! great job
That thing is a fucking beast great job man
Wow would trim tabs with a nozzle trim tilt help cavitation!
How do you marry the fiberglass with the aluminum when joining the sea doo section to the Jon boat, especially without getting leaks? What do you use?
love it
What is the average height of your engines from hull to top/ deck
Have you hit anything with this boat where you added the water intake? Or ran a ground?
I am beginning a build my self by chance can you tell me your measurement from transom to the front of motor.
Great build!! what model jet ski should a guy be looking for? Thanks
These builds are amazing ! Do you get them inspected and registered after the jet install ? Or do you just take the chance ?
What did you use on the bottom of your Jon boat I want to protect it for small sand and gravel when I beach It on sand bars I travel all year on the Mississippi river and Minnesota river
nicely done i would of went with a steering wheel and a hot foot but
Do you build and sell any of these boats?
I like what you have done to your Jon Boat, I have a job boat what kind of under coat Did you use? I'm want to do the bottom to help protect it from small rock and scratch it up.
Anyone know how far this was set motor was set from the transom?
Do you have plans for this stuff? This one has more power then some boats 4x it’s size
What's the top speed? Also fuel efficiency?
You have some amazing skills and patience for sure. What's the advantage of a jet boat in your neck of the woods? I owned the Winjet on Lake Mead for a few years which was powered by dual 2004 XP DIs. While those SeaDoos are amazing, that beast was such a pain in the ass to dock and get out of the harbor. I had to put on a trolling motor just to keep my wife from having a panic attack. The amount of gas it went thru daily was unreal, it could easily burn 4 gallons x 2 an hour and Lake Mead is massive. My 20' pontoon w a '95 115hp Evinrude 2 stroke is only slightly slower than the Winjet's dual 130hp motors.
I have a 94 tx 17 bass tracker. How much does it cost to do a build like this.
How did you seal it up
How much did it cost to build it wanting to make my boat a jet John and make it nice like yours
How much how fast?
Looks like you're on Black River? Building one soon for this exact reason, river gets low and I wanna go! Lol
Do you have a Facebook page or a way that someone could get ahold of you to talk?
How much if you build one
I want to buy this boat?
Super sweet but I feel like the bed liner on the outside of the hull is definitely robbing you of speed.
Any drawbacks to putting bedliner on the bottom of the hull other than added weight? I don't see it adding drag, it should actually break surface tension.
@scuba5904
5 жыл бұрын
No draw backs that I have experienced.
How do you deal with cavitation issues I have a 1436 and a Kawasaki 750ss Jet Ski that has 75 horse do you think that would be enough to get the boat bunch of gear plus the decking and three people on plane and be able to get up to a decent speed thanks again bud you got a real Talent
@scuba5904
6 жыл бұрын
lick mytoad on flat bottoms a spoon design has to be incorporated in front of the pump to help eliminate air from entering.
Righteous...how much$....for sale ??
Bad ass
What would you charge someone with a 16’ boat and a 155hp waver runner to just to get in running in the boar I’ll build everything else?
@timwegman5776
5 жыл бұрын
Buckwild 65 he wrote somewhere in this post that he only charges $30 per hour to do this. That’s a great price in my opinion.
What kind of wood and size did you use on building the decks? @sc_disign
@scuba5904
4 жыл бұрын
1/2" treated plywood
Wicked build. That motor have any issues keeping the stereo system going?
@jaycevessier7554
4 жыл бұрын
It shouldnt, we run 10x the systems on SXS's with no no issues
SC designs, I know on a boat a few builds back you tried durabak.....Is that what you use now? Thanks
@scuba5904
6 жыл бұрын
oneida80100 no, the durabak did not stay on the bottom very well. It's fine for the sides but not the bottom. I'm actually using wetlander slick bottom paint now. It's made for boat bottoms.
@oneida80100
6 жыл бұрын
SC Designs, thanks for your response.....you saved me lots of work. I hope your future builds continue to be successful. I have study all you videos and read your builds on forums, most helpful!
what happens when fish and game stop you with the boat certified to 60hp at best?
@scuba5904
6 жыл бұрын
wtf vids it's built under the homebuilt category registration here in GA, there is no HP restriction on inboard engines.
Can you pull a tube on one of these things?
@wyatterickson-sy2td
9 ай бұрын
Yeah you take a rope In between the handles on the back and then another connection to that rope
I assume the bedliner looking material was used as a sealer/paint/abrasion resistance but how much drag do you think that texture adds? Dont get me wrong 45mph in a jon boat is cooking
@scuba5904
6 жыл бұрын
Jeremy probably no more than a couple of mph
U polished that turd into a diamond.
did you seal the bottom with fiberglass?
@scuba5904
6 жыл бұрын
matthew lee just the seams to make it smooth, the permanent bond is 3m 5200 and screws
@matthewlee2686
6 жыл бұрын
SC Designs aw hell that must be some bad ass stuff I know that 3m I used is awesome ill check in to that. thanks man.
@joshuarivera7622
6 жыл бұрын
Yea 5200 ain't no joke. Just have to make sure u give it sufficient cure time. It bonds and also seals from water like nothing else.
Where do y’all ride on the flint river?
@scuba5904
5 жыл бұрын
Southwest GA
@robfite6909
5 жыл бұрын
I was just curious because we have a buddy with a house on blackshear and have ran up river from there.
@scuba5904
5 жыл бұрын
We run South of Albany from there down to make Seminole.
Seems like nobody think about wires what about a pipe in an angle protecting you from wires that way it will deflect it on top of the boat and not cutting you in half
@timwegman5776
5 жыл бұрын
Enoc Rivera do you mean wires running across the river? Wow my friend was riding a dirt bike in the hills and someone had ran a strand of wire across the trees just the right height to hit him in his neck and cut 2” deep. He almost died and talks with a whisper now. So I’m alway paranoid of this when I ride now. Never heard anyone els talk about it.
@enocrivera3698
5 жыл бұрын
@@timwegman5776 Yeah you always have to think about stuff like that man some people are sick in the mind if you're going really fast in a river or a Creek and someone just for the heck of it have a wire across that Can't the capitaes you but if you put a pipe and a wire quarter on top so when people are sitting down rinding you've got wired is in your way is just going to the flicked it on top of you and not kill you
How do you steer man i really wanna figure out how to make one nice fucking job love from oregon
@scuba5904
6 жыл бұрын
lick mytoad it's a push pull stick steer
How much would you charge to build me one of those?
@scuba5904
6 жыл бұрын
MrTonymusic I charge $30 hr., This build was 130 hrs. Customer supplies the jetski and the boat, material cost including the Stereo was $4100 for this build.
@lostinthewoodsangling2855
6 жыл бұрын
How are you attaching the jet ski to the bottom of the boat?
@timwegman5776
5 жыл бұрын
SC Designs that’s really reasonable price. I’m surprised your not just building them and selling as a finished product I would assume they would sell for closer to double that cost ($4100+$3900= $8k) $8k for one of these is amazing and I’m sure they could sell for $15-20k easy. Just my opinion. Btw this is one of the nicest jet Jon I’ve ever seen, very clean and professional build. Great job thanks for sharing.
@kevinharrison4192
3 жыл бұрын
@@timwegman5776 8k plus the Jon and ski... still good deal
Build me one!!!
Must not be building anymore. No more uploads
Could a done without the music. Especially when you ran the motor
Annoying as F music spoils vid