Jesus... I'm having nightmares watching you push that board over the planer!!!
@JosipVukelja6 ай бұрын
The 2 locks must be inserted up to the stop as otherwise the limit switch located 9n the inside will not be acuated and machine cannot be started. CAN YOU EXPLAIN THIS PLEASE?
@JosipVukelja
5 ай бұрын
I figured it out, the sawdust collector (black plastic) must be connected otherwise the machine won't work. Safety feature.
@Abodroc94 Жыл бұрын
¿Did you find a solution for the problem of the thinner ends? I got mine today and have the same problem as you
@pomojemu3235
Жыл бұрын
The best solution is extend table. But I'm trying to lift up outgoing end. It will reduce thinner ends.
@gregoryderwon31332 жыл бұрын
nice ! I'm the type of person that will notice the act or dog hair on you sleeve .. haha thanks for the video.. I'm thinking of buying one as a DIYer.
@pomojemu3235
2 жыл бұрын
Haha. You're a good observer :) Greetings from me and my dog Gordon :)
@Abodroc94 Жыл бұрын
Never put your hands above the blades, NEVER. Just push the piece from behind and pull it from the front. This machine can chew your fingers in 0,01 seconds.
@pomojemu3235
Жыл бұрын
Thanks for advise. I'll keep that in mind.
@BedsitBob
Жыл бұрын
And never run it without the Bridge guard in place.
@mescorbally Жыл бұрын
is the motor brushless
@pomojemu3235
Жыл бұрын
I didn't check, but I don't think so.
@hi-fijedi Жыл бұрын
I want to buy the same model... is it god? Not for profesional use...for hobi... thanks in front 😊
@timscan7273 Жыл бұрын
Never put your hand over a planner blade like that! Incredible risk - one slip and your fingers would be ripped. That's what a push stick is for.
@diogonobre347
Жыл бұрын
My cousin worked in a knife industry and was the macanic, one time doing a frame used um of this machines but like 3 times bigger blade, ripped all 5 points of the right hand, bone and stuff awfull job, must be careful all the time
@BedsitBob
Жыл бұрын
Also, you should never run it without the Bridge guard in place.
@marianlera35592 жыл бұрын
Good device, wrong use. You must stay back of the machine not by side, cose you do not have control of wood piece. Be carefull!
@pomojemu3235
2 жыл бұрын
It was my first time 😉 I'll keep in mind your advice
@mariogeymonat6873 Жыл бұрын
Dónde puede comprarla en España? Hay disponibles??? Gracias
@giancarlorossi6414
Жыл бұрын
Quanto costa
@pedrobarranco4372 Жыл бұрын
no se ven bien los anclajes del costado de escuadra, debería estar un poco mas en alto para poder verlo bien
@stevengreen43162 жыл бұрын
Dog hair all over yer and as for sawdust and chippings hardly any. I get more wood over the floor sharpening a pencil.
@ainajoan12 жыл бұрын
Sabe si la venden en españa
@pomojemu3235
2 жыл бұрын
En la cadena de tiendas Lidl
@Ana-eg7ir
2 жыл бұрын
Hace tiempo q la busco en lidl y aqui en españa no la ponen a la venta.
@joseluis7118
2 жыл бұрын
No te las recomiendo, la calidad es bastante baja. Yo compre una y sin utilizarla ya la estoy devolviendo.
@franciscoalvarezgonzalez4217
Жыл бұрын
No merece la pena aunque cueste menos,es malísima almenos la mía.
@achillegazzoni202610 ай бұрын
Il prezzo
@ahmeddraoui38722 жыл бұрын
Je n'en pas
@papinlapin11 ай бұрын
Ras le bol de l’ouverture de la boîte ! J’ai arrêté cette vidéo insupportable
@papinlapin Жыл бұрын
Que le début est catastrophique ! 5 minutes pour ouvrir la boîte ! J’ai zappé ! 0/10 Titre de cette vidéo : comment ouvrir une boîte Parkside!
Пікірлер: 33
Buen vídeo 👌👍💯👋👋
Jesus... I'm having nightmares watching you push that board over the planer!!!
The 2 locks must be inserted up to the stop as otherwise the limit switch located 9n the inside will not be acuated and machine cannot be started. CAN YOU EXPLAIN THIS PLEASE?
@JosipVukelja
5 ай бұрын
I figured it out, the sawdust collector (black plastic) must be connected otherwise the machine won't work. Safety feature.
¿Did you find a solution for the problem of the thinner ends? I got mine today and have the same problem as you
@pomojemu3235
Жыл бұрын
The best solution is extend table. But I'm trying to lift up outgoing end. It will reduce thinner ends.
nice ! I'm the type of person that will notice the act or dog hair on you sleeve .. haha thanks for the video.. I'm thinking of buying one as a DIYer.
@pomojemu3235
2 жыл бұрын
Haha. You're a good observer :) Greetings from me and my dog Gordon :)
Never put your hands above the blades, NEVER. Just push the piece from behind and pull it from the front. This machine can chew your fingers in 0,01 seconds.
@pomojemu3235
Жыл бұрын
Thanks for advise. I'll keep that in mind.
@BedsitBob
Жыл бұрын
And never run it without the Bridge guard in place.
is the motor brushless
@pomojemu3235
Жыл бұрын
I didn't check, but I don't think so.
I want to buy the same model... is it god? Not for profesional use...for hobi... thanks in front 😊
Never put your hand over a planner blade like that! Incredible risk - one slip and your fingers would be ripped. That's what a push stick is for.
@diogonobre347
Жыл бұрын
My cousin worked in a knife industry and was the macanic, one time doing a frame used um of this machines but like 3 times bigger blade, ripped all 5 points of the right hand, bone and stuff awfull job, must be careful all the time
@BedsitBob
Жыл бұрын
Also, you should never run it without the Bridge guard in place.
Good device, wrong use. You must stay back of the machine not by side, cose you do not have control of wood piece. Be carefull!
@pomojemu3235
2 жыл бұрын
It was my first time 😉 I'll keep in mind your advice
Dónde puede comprarla en España? Hay disponibles??? Gracias
@giancarlorossi6414
Жыл бұрын
Quanto costa
no se ven bien los anclajes del costado de escuadra, debería estar un poco mas en alto para poder verlo bien
Dog hair all over yer and as for sawdust and chippings hardly any. I get more wood over the floor sharpening a pencil.
Sabe si la venden en españa
@pomojemu3235
2 жыл бұрын
En la cadena de tiendas Lidl
@Ana-eg7ir
2 жыл бұрын
Hace tiempo q la busco en lidl y aqui en españa no la ponen a la venta.
@joseluis7118
2 жыл бұрын
No te las recomiendo, la calidad es bastante baja. Yo compre una y sin utilizarla ya la estoy devolviendo.
@franciscoalvarezgonzalez4217
Жыл бұрын
No merece la pena aunque cueste menos,es malísima almenos la mía.
Il prezzo
Je n'en pas
Ras le bol de l’ouverture de la boîte ! J’ai arrêté cette vidéo insupportable
Que le début est catastrophique ! 5 minutes pour ouvrir la boîte ! J’ai zappé ! 0/10 Titre de cette vidéo : comment ouvrir une boîte Parkside!