That xtreme penetrator is no joke! People call these gimmick rounds…the tests prove otherwise. Amazing. Thanks for the test brother!

@deltapapa82

2 ай бұрын

I was qualifying at work and brought along a ballistic vest panel we no longer used. I shot it twice with 10mm Extreme Penetrators and both passed through. It was rather impressive.

@johnw4999

Ай бұрын

I wonder how the Xtreme Penetrator compares to the G9 variant? I know that at some distance (example, just throwing out a number, 75 yds.), the unique rds can vere off course by a few feet.

Nice test, I'm also impressed with the Underwood xtreme penetrator.

Thank you so much for these tests. I was glad to see that the results of the xtreme penetrator near the fixture versus the top of the sheet were similar. I thought the difference in shot location "would matter" more. Great accidental sanity check. This test deserves WAAYYYYYYY more thumbs up and views !!!! Well done !!!!

@NYPrepper

Жыл бұрын

Thanks so much!! Yep exactly the top or bottom doesnt really matter, it doesn't have to be rigid.

Found your channel from watching KLW channel. I def want people like you on "my" side when SHTF

The metal sheets have a lot of flex since they are only secured on the bottom, try the same test with a board on the top securing all of the sheets and then you’ll get more realistic results. If you’re using these in real life car doors, windshield and body’s aren’t going to flex that way

@shawnsanders9450

4 ай бұрын

Except the Underwood penetrated the same both top and bottom.

@tomt998t

3 ай бұрын

Thanks for running these tests and posting the results. I do agree that there is a lot of flex on the top of the plates. This might have an influence on things, depending on where the bullet enters the sheet top to bottom. Maybe supporting the tops would be something to try and see if the results vary. Thanks again!

@frustratedmajority851

2 ай бұрын

I'd guess there would be deeper penetration on rigid sheet metal. All that "give" is wasted energy.

@Radvous

18 күн бұрын

The problem with a lot of these more powerful calibers is the wasted case space. They seat those bullets so far that they take up over half the case, such a waste. If they loaded those rounds like 9mm where a smaller portion of the bullet is actually sitting in the case, leaving lots of room for powder, these would be much more efficient rounds.

Good going, good stuff chief 👏 👏 👏.

@NYPrepper

4 ай бұрын

Thanks boss

Thanks for this test. I love that 10mm.

@NYPrepper

Жыл бұрын

Best semi-auto in my opinion. I love it.

playback speed of 1.5x is perfect

In the past I’ve always relied on the Buffalo Bore 220 grain when in bear country. After seeing the results here, the Xtreme Penetrator is going the be my new bear country carry round. I’m still going to keep the Buffalo Bore on hand though.

I do similar tests (no channel though), but I use 26 gauge steel because it's free from my work. 26 gauge is much thinner. 10mm Xtreme Penetrator went through 24 sheets of it while a 10mm FMJ went through 20 sheets.

@NYPrepper

10 ай бұрын

Thanks for sharing

Try 9 by 25 dillon extreme pentrators.

Thank you for an excellent well done presentation on these bullets vs the sheets of metal. And a BIG WOW when it came to the 140gr. Extreme Penetrator Underwood lehi copper ammo performance. I also was impressed with the Buffalo hard cast ammo as well.

I got to get some of those underwood penetrators after watching your tests I am impressed.

@NYPrepper

6 ай бұрын

Thanks for watching! Yea they impressed me too. Any solid copper bullet will work great with 10mm.

Great video 👍💪What kind of guide rod are you using?

Great test. Make me curious how would a Xtreme Penetrator shaped hard cast ammo behaves in the same test. Wish one day we'll see this option.

The problem with a lot of these more powerful calibers is the wasted case space. They seat those bullets so far that they take up over half the case, such a waste. If they loaded those rounds like 9mm where a smaller portion of the bullet is actually sitting in the case, leaving lots of room for powder, these would be much more efficient rounds.

From my experience, Underwood and Buffalo bore ammo, make real 10 mm rounds. The other companies don’t put enough powder so they’re really nothing more than a 40 Smith & Wesson.

The underwood EP has a pice of steel from one of the pieces stuck to it so it punched a hole instead of ripping through that's cool.

@NYPrepper

4 ай бұрын

yeah it is very interesting how that works

One sheet, I’m going through a car door.

I Like The Lead Residue Splatter that's Neat

@NYPrepper

Жыл бұрын

Yea it looks cool haha

Awesome test!!!

@NYPrepper

9 ай бұрын

Thank you!

That's how the test works, the xtp kept the jacket so you should weigh it as is

Nicely done... I use the Xtreme Penetrator in a G40... runs over 1600 fps..

@NYPrepper

10 ай бұрын

Thats smokin!! Thank you more to come.

Interesting tests & results. Thanks

@NYPrepper

Жыл бұрын

Thanks for watching

GREAT VIDEO !

@NYPrepper

11 ай бұрын

Thank you!

watched a ton of videos almost went with hard cast but i think im going with the extreme pen for grizzly defense thanks for the video! would like to see rifle and shotgun pen test just to see how more affective they are when up against a grizzly

Excellent. Thank you.

Interesting to note about how much energy it takes to put a dent into some 16ga steel. It would take a good size hammer, and a good swing to make a dent like that in one go. Essentially Im saying- the energy it takes to produce this kind of damage is much more than most can do to that material in one go.

@NYPrepper

Жыл бұрын

Yea I know it is surreal and my elephant gun went through crazy amount...take a look at that video

@JaySims

Жыл бұрын

@@NYPrepper 300RUM at 1,000- now THAT is a hell of a vid!!!!!!!! Wow.

One of the BEST TESTS SEEN, been looking and found all but what this young man test methods, subscribed. 💯

@NYPrepper

Жыл бұрын

Thank you...much more to come

@ZorroDaddy

Жыл бұрын

@@NYPrepper Thank you very much young man, I am having an issue with picking up the Right ammo for AR15 that can use 223 and 5.56, brand wise, not sure if Federal is ok for example , HPBT are preferred I guess, thing is to save money while still having a good results.. Thanks again for the EXCELLENT CONTENTS

My money was always on underwood, been wanting some of those 100 grain extreme penetrators, gonna see if you've got a video

defense for cars now we know we don't need hard cast, can stick with Xtreme penetrator 140 grain copper solids

very interesting test, especially given the unsecured way you set up the plates. Wonder what the test would look like with a 16 or 17' carbine:)

Man I love 10mm

At least the third time I've watched this great test. It's a piece of mind confidence boost for my carry in grizz world.

Which best 10 mm handgun handle these with factory barrel ?!

@NYPrepper

10 ай бұрын

They all should, a lot of people have said polygon rifling is bad for hardcasts but if they are properly lubed that shouldn't be an issue unless you fire hundreds of rounds. If you really want to shoot a lot of hardcasts get a traditional rifled barrel, not polygon like Glock.

@MrHiddenlancer

10 ай бұрын

@@NYPrepper thank you

So what I’m hearing is if I’m in bear country, bring the xtreme penetrators. I live in CO and am often deep in the wilderness, good to know.👍

@NYPrepper

10 ай бұрын

They would work, solid flat noses would work better

@jakepauer7227

7 ай бұрын

⁠@@NYPrepperI'm curious if Hard Cast Flat Nose is superior against bears, is it superior for self defense? what is the exact load and ammo type you would prefer for say a 40 s$w conceal carry? my logic is Id want my ammo to put down bears and big bad guys the same way, quick.

@Yetified_Mayhem

6 ай бұрын

Lot of options for black bear. But if you're ever in coastal brown bear territory, most carry that 220 HC

@shawnsanders9450

4 ай бұрын

I don't know. I think the Xtreme penetrator is better for Grizzlies. Brown bear have so much mass and the skull is so thick you want to go through as much as you can as deep as you can and the last thing you want is bullets skipping off the skull rather than going through it and if you don't hit head think about how thick everything is until you get to the vitals? Velocity is more important than weight. Just my opinion though. Recently watched The Revenent and man. That would be one of the worst ways to go in the world. Got me thinking what would I want in case of that situation. I'm thinking chest rig with a Glock model 40 and 3 15 round mags of Underwood extreme penetrators and that's just my backup. Primary I would want a Ruger SFAR 16" in .308 with 5 20rd mags because it would be the lightest package to carry with the most firepower for something like that. Heck I mean a AR in 338 Lapua would be best but I can't afford one of those and that's really heavy to go hiking with. I don't have either of those yet but I'm gonna get both and see how they handle on a long hike.

You should put another board on top to hold the metal more securely, as it is it flexes and uses up some of the energy

@NYPrepper

Жыл бұрын

I can tell you don't do much ballistic testing or have little experience with firearms. That doesn't matter I have done numerous tests with these to prove that. It either has the energy to punch through or it doesn't.

@dalerobertson9618

Жыл бұрын

Guess you didn't read the guidelines, for little experience, I'm 65 years old and have been hunting and shooting all my life. So stick that in your pipe and smoke it. Rude little man

great video!

@NYPrepper

Жыл бұрын

Thanks!

Wow, But Glock says Dont use hard cast, as it has lead and it ruins the barrel, is that the reason you used another one? I also heard from a Glock guy saying it wasn't made for hard casts ,thanks, loved the vid bud.

@NYPrepper

Жыл бұрын

I have used hardcasts with the factory Glock barrel with no problem. Just make sure you clean the barrel more frequently and are using a high brinell hardness hardcast not a mediumcast or soft cast. You want a true hardcast. I got the upgraded barrel for better accuracy and for the threaded barrel so I can use my suppressor and slightly longer. It has a tighter chamber too.

@ZorroDaddy

Жыл бұрын

@@NYPrepper Thank you bud, any brand on mind to will look up? stay safe and thanks again.

That stuck E.P. looks like it punched a circle out of the 3rd like a cap & rammed it into the 4th. Thats impressive. Subbed. Well done there bud! 😁

@NYPrepper

Жыл бұрын

Thanks for watchin, got sone more like this coming.

Cool test. Thank you. With that, I wonder how the outcome would be if the top of the sheets were secured like the bottom to remove some of the flex?

The thing about 10 mm ammo is finding a load worthy of the gun which isn't easy. I've seen other videos where most factory loaded 10 mm struggle to stay on par with a standard 40 cal s&w round over a chronograph and in gel. It's also odd how some people would have totally differing results using the same ammo. Also I have noticed that I have yet to see a round nose fmj in either 40 cal or 10mm. I don't have a 10 mm, I just have a 9mm. I have seen gel penetration tests where average 115 gr 9mm range ammo and again in gel, out penetrate both hard cast and extreme penetrator. The ammo inc is the real deal. I have both 115 gr jhp, 115 gr fmj, as well as some 124 gr fmj ammo inc for my 9mm. The jhp as only nine bucks for a box of 20. Compared to sometimes nearly thirty buck for a box of 25 hornady critical defense or duty it's a no brainer. And the ammo inc fmj box of 50 9mm was only 13 a box.

@NYPrepper

4 ай бұрын

I handload 10mm and if not I only trust Buffalo Bore and some Underwood

@kennethrisner8648

4 ай бұрын

@@NYPrepper You're one up on me I don't reload lol. A question for you/ Do you have an email I could contact you at? I wanna run something by you that might or might not interest you.

Do you know why the 10 was developed?

I Use Gold Dot Hollow Points in My Two Tone Kimber 1911 45 ACP I Want To Try These Exotic Ammo Brands 💯

@NYPrepper

Жыл бұрын

Gold Dots are good for expansion, but not penetration. They are designed to open up quickly for cops to avoid over penetrating.

@ChrisPBacon198

Жыл бұрын

@@NYPrepper What Kind of Exotic Ammo is Good For 45 ACP What Would You Recommend?

The Ammoinc probably stayed intact because of its low velocity, I doubt it was even close to the advertised 1190 fps.

@NYPrepper

Жыл бұрын

I chronographed it it does get that much

Have you tried the VELO 10mm 200 grain Hard Cast Lead and the Winchester Big Bore 10. 200 grain SJHP, Well done,Thank you.

perfect.

@DonaldHHout-ok2fy

Жыл бұрын

I Agree.

@NYPrepper

Жыл бұрын

God bless thanks for watching

testing

What would be your top factory loads for bear defense in 10mm and 45-70? I’ve been watching a lot of your videos thank you for doing this!!

@shawnsanders9450

4 ай бұрын

What you just saw. Underwood Xtreme penetrator. Glock model 40 would be best.

10mm yummy.

I use Underwood 180 gr. XTP JHP's (1250/660) in my Glock 29 daily carry, and I would bet they would easily penetrate one sheet and put a big dent in the second.

Just a thought if you put something that would hold the top of the metal, so the metal would not flex so much like you have on the bottom would it make a difference?

@NYPrepper

Жыл бұрын

No it wouldn't as you see I shot the top and bottom of it and made no difference.

I honestly think most will work on about anything you can hunt

Those ammo inc fmj are weak

@NYPrepper

Жыл бұрын

Yea definitely not full power that's for sure, but still over 500 ft-lbs.

How many might it penetrate if the metal was in a rigid frame all the wat around? Does the fing of the plate use up excessive energy?

@NYPrepper

5 ай бұрын

Does not matter

@shawnsanders9450

4 ай бұрын

Did you see the Xtreme penetrator? He shot right at the bottom and right at the top and it made no difference

if those 4 sheets were staked on top of each other, no gaps, would the results be the same? was thinking maybe 4 of these sheets in a back pack might help you out of a bad situation someday.

@NYPrepper

Жыл бұрын

I wonder the same. I think stacking it would make it even easier to penetrate.

@rollingthunder6406

Жыл бұрын

@@NYPrepper Also wonder if layered with some cloth or even a layer of silicone between them (dry) if that would absorb energy. I hear some armor is made with layers. In Medieval times I believe they put leather or something between layers.

Why do some people have kkm barrels for 10mm glocks?

@shawnsanders9450

4 ай бұрын

For longer barrels and to use compensaters and suppressors. Also caliber changes. For instance a Glock model 22 or 35 will get you like over 6 guns. For instance if you buy a Glock model 35 you can get a KKM barrel for 357 sig and 9mm. You can also put a Glock model 22 slide on it and then do the same. 9mm barrel and 357 sig barrel. When you change calibers all you really need is the conversion barrel and a new magazine for that caliber. Its why when I buy Glocks I get them in .40 cal so I can have MANY different guns out of 1 frame.

Hey You Should Do a Video Warning People About Squib Rounds Some One Out There Has Defective Ammo And Doesn't Know it 💯🙂

@NYPrepper

Жыл бұрын

Thanks for reminding me, that is extremely important

@ChrisPBacon198

Жыл бұрын

@@NYPrepper I've Had a Squib Back in 2005 🤯🤣

I thought the hardcast would do better. Interesting

@shawnsanders9450

4 ай бұрын

Bullet design and speed is everything for a test like this.

This is almost worthless because the sheet metal deflect the projectiles and deflects each projectile differently.

Wow, I m really loving these tests you do. I do alot of penetration tests but no channel. Where do you get those sheetmetal squares?

@NYPrepper

Жыл бұрын

Metal supply stores or Lowes/Home Depot

Good Evening 🌆🌇 Greg. I Hope That You Had A Great 👍 Day Today. I Hope That You Had A Great 👍 Weekend Greg. I Gave Your KZread Video A Huge Thumbs Up 👍 Ok Greg. Iam Still Praying 🙏 For The Entire World 🌎 Too Ok Greg. AMEN 🙏. I Subscribed To Chukes Outdoor Adventures KZread Channel Yesterday Greg. I Love ❤️ Watching All Of Your KZread Videos Greg. Keep Up The Great 👍 Work Greg And Thanks 🙏 For This Update. I Love ❤️ Watching All Of Your Gun KZread Videos Greg.

@NYPrepper

Жыл бұрын

Thank you so much Donald iIappreciate your support and for subscribing to Chuke

10 mm more powerful then 357

i like 10mm.

Love this test. I too thought that no support on the top of the sheet metal would make a difference but you proved me wrong. Why would you choose the Buffalo Bore for bears over the better penetrating Extreme penetrators?

@NYPrepper

Жыл бұрын

Extreme penetrators don't penetrate in a straight line always and can tumble and don't penetrate through tissue as well.

@embryedwards4821

Жыл бұрын

@@NYPrepper thankyou for the response. In that case it will be Buffalo Bore or Underwood Hard Cast for me.

@Yetified_Mayhem

6 ай бұрын

Bigger hole is better. HC penetrates fine. I live in Grizzly country and have no proof of what I'm talking about, yet...

Iam 3rd Here This Evening Everybody.

@ChrisPBacon198

Жыл бұрын

🤣😂🤣

@ChrisPBacon198

Жыл бұрын

You Crack Me Up Donald 🤣💯

great video

so which is best for bears then?

@NYPrepper

Жыл бұрын

Buffalo Bore Hardcast or Xtreme Penetrator