The legendary 10 minutes for EACH bullet talk..

@TheCaptnHammer

23 сағат бұрын

And ten minutes in the color shade of the Barnes. Lmao. Keep it coming gents, but maybe less wax poetic.😊

10 minutes 😂

@ducksoup786

3 ай бұрын

Slight miscalculation.

@Perry2186

3 ай бұрын

Well 10min segments

@ShockerMain2124

3 ай бұрын

Biggest lie on the Internet

@edwardabrams4972

3 ай бұрын

10 min’s or 6” inches it’s all how you look at it🤔😳😂 I am far sighted so my wife says I have an excuse🤣

@edwardabrams4972

3 ай бұрын

@@ShockerMain2124No the biggest is saying “ this is the biggest lie” 😳😂

I can’t believe you tried to make this a 10 minute talk. I opened my KZread app, saw the topic and said no way

This is absolutely my favorite episode…I can listen to an hour about each bullet type

Made my morning with this! And a 6ARC cameo to boot! I just got a Howa Mini in 6ARC after binging Ryan’s carbon Howa episode an unhealthy amount of times.

FMJ bullets are preferred when using rifle for bird hunt at least in Finland - they minimize the loss of meat (which there is not that much to begin with).

I love these 1:28 minutes 10 minute talks. They’re the best.

From military perspective FMG is preffered, not just from legality perspective, but from practical as well. First will pass trough and through and potentially hit another combatant, dose not shatter on ricochet , feeds more reliable in automatic weapons, cheaper, more chance to induce an wounded soldier that takes more resources than a dead one....adn i can continue on.....

@aquaman6081

3 ай бұрын

That's not true. It's cheap, and produced in massive numbers. It works good enough, and can penetrate. That's it

@biggs8729

3 ай бұрын

Your both partially right. The military has done extensive studies, obviously, on FMJ bullets. They have put a minimum "lethal" velocity on each FMJ they use, which is the minimum velocity a bullet will still break apart at the cannular when it yaws or tumbles in ordinance gel. FMJ bullets don't just poke holes, they tumble, which in it's self, causes a lot of damage, but if they are going fast enough, they also break in half at the cannular causing massive damage and they are still legal by international rules of war.

@jeffreywilson690

2 ай бұрын

Missed one rebaited boat tail

The thing shot out of a cannon in Mario is Bullet Bill, the bomb-bomb is different

@casman9635

2 ай бұрын

Came here to see if anyone else already corrected them lol.

Best part of this podcast is cartridge talks. #changemymind

10 minute talk 88 minute long video The bane of my wife's existence 🤣

Life pro tip - Those 5.56 77gr Sierra Match Kings boat tail hollow points are also what you should be running in your shorty ARs, eg 10.3” 11.5” 12.5”. These rounds fú¢k out of SBRs where the 55gr M193 & 62gr M855 green tips don’t perform well terminally.

Ba Bomb was a Bomb. Bullet Bill's were the Bullets in Mario... just an FYI.

Been wanting something like this for a while. Thanks for putting it together

Don't forget states requiring the use of lead free ammo for hunting, that's a part of the push away from bonded bullets as well

My favorite part was Ryan and Jim spending 2 full minutes rearranging the boxes on the table! .35 Rem 10 Min. Talk!

Yall said it - It Just Works - Good Ole Soft Points

This was almost as long as standing in the corner for 10 minutes when I was a kid… but INFINITELY more interesting.

Great video, would love a cartridge talk on the 7.5 Swiss. It's a real interesting cartridge, current world record for the furthest open sight shot is held by a shooter using a K31 in 7.5 Swiss with handloaded 190 SMK's.

I tested cup and core vs bonded in 300 blk to see how it does as a whitetail cartridge. Amazing difference in the 2. Can see the test and results on KZread God's Country shooting and outdoors. Love your channel guys!

As someone who reloads this is a great "10" minute talk. The greater offering of bullets sure has changed in 30 years since I started loading.

The Terminal Ascent is a hybrid design. It is intended to be more accurate than a traditional bonded bullet by reducing the size of the bonded core and moving the lead towards the centerline (spin axis) of the bullet. This is in contrast to many traditional bonded designs like the Accu Bond series which essentially solder the lead core to a relatively this jacket. Typically, a flux is used to strip off oxides to get a good bond, but these particles of oxide stay in the core. The particles of oxides are a different density than lead and can deposit randomly in the core as it is melted for the bonding process. Those particles throw off the balance of the bullet slightly, especially if they stay near the outside (the jacket-core interface). The Terminal Ascent bullets reduce the effect of the oxide particles on balance by making the total bonding surface smaller and moving it towards the centerline, where it has less effect on the spinning bullet.

The pure number of people who shoot the VMax bullet on whitetail is mind blowing

@davidsonfitness318

3 ай бұрын

I personally haven't done it but I hear from people who use it on pigs and deer out of a 300blk. With the lower velocities they say it expands like a traditional bullet.

Best podcast to listen too!

Love it!! Beginning to end. Keep going down the rabbit holes. Love y’all’s personalities and the information is awesome.

I haven't caught any of the podcasts in a while and missed the velvety smooth delivery by the bullet and firearm guru Brian Muckenhern. This was a nice chat about Rifle Target /Hunting Bullet types. They should do one on the pistol bullet types as well sometime. Lots of folks still cast lead solids and hollowpoints and powdercoat then we have copper plated, copper jacketed, and expanding monolithic copper, etc much like the rifle bullets but without the mechanical or chemically bonded and tipped variants that rifles have.

These videos have helped me through most of my course in my SDI schooling! Love the great informational videos guys, keep it up. 👍🏽

Thank you for the updates on so many bullets that have been made in the last 20 years! I'm a reloader since the 60's and hunter before that. What a wonderful explanation of what we have to choose from now!

Hey Ryan , I just rolled up a 7 mag for the talk .

I love bonded bullets! I hope they don’t go anywhere anytime soon. The AB, Scirroco, Terminal Ascent! All fantastic!

@shovelhead2155

2 ай бұрын

Don't forget Federal Fusion. They are coming out with a tipped version soon

@mikeTyson329

2 ай бұрын

@@shovelhead2155 I’ve been wanting to get some of the Federal Fusion MSR in .223/5.56 to see how my rifles like them.

@shovelhead2155

2 ай бұрын

@@mikeTyson329 They are great. Hope they work well for you. And the velocity on the back is from a 16 inch barrel.

@mikeTyson329

2 ай бұрын

@@shovelhead2155 That’s fantastic! I wish 16” velocities were posted on more 5.56 ammo boxes.

@shovelhead2155

2 ай бұрын

@@mikeTyson329 I agree. Not many people running around with 24-26" Varmint barrels (which I happen to like), and that's what the most common lengh for .223 test barrels is. 5.56 NATO is from a 20" barrel at 50 feet, I think. That is why I laugh when a box of 55 grain .223 says 3,250 FPS, and m193 usually says 3,125 FPS. Typically .223 55 grain from a 16-inch barrel is about 2700-2900 FPS, depending on the manufacturer.

"Low speed, high drag". Great concept for a cartridge! You could call it the .45 RuPaul

Love to see a podcast on the subject of mixing different manufacture brand ammo in the ammo can, like 9mm for example. Pro & Cons.

I really enjoy your 10x talks!

Swedish vs Italian meatballs for next season of spaghetti shootout

@jaydunbar7538

3 ай бұрын

“Horse vs beef” fixed that for you lol

@stevecochran9078

3 ай бұрын

Depends on the sauce.

As Cowboy Kent Rollins said, “You don’t get full on fancy!”-referring to culinary pursuits. He cooks Cowboy Chuck Wagon style and feeds working cowboys. He should know. I’m enamored with the TTSX myself. It’s fancy enough for me. But my dad took an elk with a 200 gr round nose from Remington (Core-Lokt) through a 35 Remington Marlin 336. Not fancy by any stretch but that elk didn’t die laughing.

I am a big fan of bonded bullets, the federal fusion (or Speer Gold dot) especially. I believe these stand out from other bonded bullets because they are essentially an extremely thick electroplated jacked with an exposed tip, until the polymer tip Speer Impact. Federal and Speer can manufacture them this way because of their location in the PNW using cheaper power from the Columbia river dams. Other companies may use a process more similar to soldering to bond the jacket and core. I have personally sectioned bullets out of curiosity, and was shocked at the small size of the hornady interlock ring. The representation of the picture on the box is much more pronounced than in reality, although I have used interlocks to take deer with a 30-06. The jackets can separate from the core if you hit bone, something the fusions would not do. The fact that the interlock ring is used in the Interlock, SST, and ELD X lines means most of the innovation has been on the outside rather than the inside of their bullets. Great "10 min" talk thanks

@shovelhead2155

2 ай бұрын

Federal is adding a Tipped Fusion to the lineup. Will have awesome B.C.

Me: hell yeah, another vortex ten minute talk *Opens video* 1 hour and 28 minutes

Ref bonded bullets, my experience with .30 cal Accubonds vs Ballistic Tips is that with 165s & 180s Accubonds aren’t appreciably tougher at .308 Win & .30-06 speeds. Maybe the ABs pull away with the magnum .30 cal cartridges. On the flip side, IN MY RIFLES, factory Ballistic Tip loads typically shoot better than ABs. So for me as a non-magnum .30 cal shooter, my answer to the bonded bullet question is, “What’s the point?”

You should do a ballistic gel test with match type bullets

@phild9813

3 ай бұрын

I agree. Need to test many different brands though. I suspect some will perform consistently and some not so consistently. Some may work like an expanding bullet and some more like an FMJ.

This is what im talkin bout baby

Love it!

Ten minutes turns to ninety. gotta love it. I will say that the only way I could see bonded bullets going away completely, would be if the monolithic copper bullets get cheaper. As olit stands now, a bonded bullet offers more than half of the performance, at almost half the cost of an all copper bullet (especially if we are talking about full cartridges and not just the bullets). I've been trying to stack as much federal fusion 223 as I can, but it's so damn difficult to find in stores around here, and most of the online retailers are marking it up a great deal.

How about a cartridge talk on the 7x57 Mauser?

The dream team

Mark with the "FNG" bullets 🤣🤣🤣

The good old FMJ🙌 hunted with them in the 60’s for deer when they were all you could find during hunting season for hard to find cartridges. One if my dads best friends was friends with John Nosler in the 50’s and 60’s when they were in Ashland oregon and still can remember when my dad switched over to the good old Partitions!

@billyhancock7851

4 күн бұрын

How did the fmj's work for you? I had a friend who used them regularly. He said that he never had a problem. They are a lot easier to find than some other styles.

Haha! Bless y’all. Learning time is tuff!

i love these vids

Bonded bullets are quite popular in South Africa. I hunt All my game, springbuck to eland with bonded bullets, Nosler accubond most of the time. I think it causes less meat damage

Up next on 10 minute talk the 340 weatherby magnum

It is funny how similar some of our minds think even when we have never meet certain people in different parts of the country. Ryan’s thought process is much like mine , Bullets, calibers, rifles, types and styles of hunting, it’s great to see

🤘 Manson reamers grand Blanc Mi here. Good stuff guys!

The sleeper round has to be the one not shown; The Federal Fusion, or now, the Tipped Fusion. They cost less than the Noslers, not much more than Remington Corlokt but perform like premium priced ammunition. I think Federal is knocking out of the park right now with all of their bullets, from the Powershocks up to the Terminal Ascent.

Loooooove that 10 minute (1.5 hour) talk hahaha. Like the vid length is the first thing I look at when a 10 minute drops😂

Flat base bullets have more bearing surface on the lands and grooves of the barrel. Is there a situation when that is adventitious? Maybe a barrel with high internal wear on it.

This is a fascinating discussion. Talking of a “tough” name for bullet was our Australian bullet the Woodleigh WELDCORE. Either a round nose or semi spitzer bonded bullet. One reason I believe that bonded bullets have been losing popularity is cost and the type of game animals that the majority of hunters take. For the vast majority of hunters you don’t need the toughness of a bonded bullet.

lol loved the argument about the bonded bullet being phased out. I too love bonded bullets as I don’t want to pick lead out of my meat. However I do agree that in rifle ammo they will be phased out. I think they are here to stay in handgun ammo.

Great job, as always guys. One more thing, I believe bonded sticks around, if for no other reason, because many law enforcement agencies use bonded .223/5.56.

I either want a cheap bullet (not bonded) A high BC bullet (not bonded) Or deep peneteration (copper mono > bonded) 🤷‍♂️

@Outdoor-Tactics

3 ай бұрын

Funny how that works out lol

@mikemelina7395

3 ай бұрын

The ABLR is a high BC, deep penetrating bullet that has the added benefit of also being bonded, as is the Terminal Ascent. As an added benefit, you'll get more penetration and expansion at longer ranges than you will with copper mono, because they weigh more. ABLRs have crazy high BCs.

Jordan from Mount Morris mi here. Makes chamber reamers for a living @ Manson Precision Reamers…good stuff guys🤘🍻

I just went to TTSX bullets in my 708 ,140 grain ,,and 30-06, 168 grain 1/2" groups ,,, the 708 is the Thompson center venture compact 20-in barrel. Those bulbs are flying 2850 ft per second,,, the 30.6 is a Remington mountain rifle with a 22-in barrel and those bolts are flying 2750 feet per second.

Great Video, the Hornady Interlock, Nosler Partition, and the Speer Grand Slam are all great. Get her done. Economically, bullets for reasonable hunting distance. The bonded Bullets are my personal favorite, whether Nosler or lately, the Speer Impact. As you can tell, I reload my own cartridges mostly. And I noticed you did not have any Remington Cor-lock or New Remington Long Range

A decent rule of thumb is that a monolithic copper-allow bullet will be as physically large as a traditional cup-and-lead-core bullet that is 25% heavier. A 120grain monolithic is about the same size as a 150grain cup and core, for example. The BC of the bullet, though is related to the density as well as shape. so the lighter monolithic bullet will have a lower BC than the same shaped cup and core. This is partially offset by the lighter bullet being launched faster, but if you are looking at 500 yard shots, the monolithic bullet is typically at a disadvantage vs a tipped bonded or cup-and-core.

These guys crack me up🤣 this reminds me almost 60 years ago we were arguing the same thing only with the only caliber that would kill deer and elk🤣

This may be the record length 10 minute talk?

Terminal Assent is awesome.

Would love to hear y'alls thoughts on the 360 buck hammer

Jim really fought off that yawn at 40:30.

At normal hunting ranges, 300 yards or less, very hard to beat core lokts or power shoks. They will continue to do what they have done for years. Hunters are finally figuring this out!!!!

I think bonded is a cost issue, being the same or more as monolithic/ lead-free bullets, and then there is the question of why not go with the lead-free at that point. Going with a heavier lead bullet to limit the downfalls of bullets falling apart at short range also leads to the question of whether a bonded bullet is needed. That being said, I would prefer bonded in a lead bullet for 90% of my hunting over standard lead, but just as easily would grab the lead free option.

@edwardabrams4972

3 ай бұрын

Bonded is best at ranges 300 yards or less especially with magnums which is the reason they came out to begin with!

@JimmyJusa

3 ай бұрын

@edwardabrams4972 similar to lead free bullets due to velocity requirements. Neither is a wrong or bad choice at all.

The best homogeneous copper bullet, without doubt is the Lapua NATURALIS. Superb accuracy and much better terminal ballistics than a Barnes.

Swift loads and sells their bullets as Swift High Grade Ammunition. US military scout-snipers use tipped Sierra Match Kings. They used the open tip MKs prior to this. Some poorlyinformed member of Congress claimed the open tip bullets were causing horrific damage despite NOT violating the Geneva Conventions so we switched to the tipped bullets.

My favorite episode so far! One thought about flat-based bullets: in some situations you might have more surface contact with the case neck (think light for caliber) -or- you might have less bullet intrusion into the powder column (think longer bullet that has to sit back into the case more). Does that have any bearing? (Forgive me for the horrible pun 🤓) P.S. Hornady is really irritating. That 160 grain 7mm CX bullet? No data for either 7mm-08 or 7x57 Mauser. Seems like it would be ideal for the 7x57…

FMJs are the deadliest bullet…in mass. Quantity has a say in the equation.

One of these days I hope Ryan will divulge more about his process for load development. I bought 130grain TTSXs because he seems so passionate about them.

Hornady's Interlock patents seem to have expired since some of the new Remington tipped core-lokt and the Norma Tipstrike bullets seem to have it now.

I pulled 16 very distinct loads out of my ammo can. 8 different calibers. Only one was bonded, one partitioned, none homogeneous, half of them tipped. If I want to go “tougher”, just increase the weight and it expands like anything, but drives deeper. Didn’t discuss sectional density, which is a predictive of penetration across calibers. SD is a lost statistic that explains why a 140gr 6.5mm bullet penetrates the same as a 180gr .30 cal.

May I suggest you guys get a big whiteboard dry erase board for easier use in explaining the jackets, coats, tips or core. Hard to see a tiny bullet on camera.

Full Metal Jacket 556 was made to make holes and wound not kill. It takes another soldier to take care of the wounded not the dead.

I have some question(s) Can you guys discuss the topic of discontinued bullets? The likes of Federal Edge TLR, Hornady BTHP Match (338 285gr), and so on? I appreciate it. Daniel

On the Hornady podcast, they mentioned the enter Bond is not that accurate. And it’s hard to make bonded bullets accurate.

The problem bonded bullets have is sales volume, cup and core plinking and match style bullets just simply sell more. You may go through a few hundred match rounds in a weekend, or thousands of plinking or varmint styles. But that one box of top quality bonded ammunition will last you the entire season, or for those like my grandfather the decade of big game hunting. I don’t think bonded are going to go anywhere, what Ryan is witnessing is the expansion of the competition and plinking sectors that just simply consume far more ammunition and not a reduction of the bonded usage. Of course this is anecdotal, but I know my own shooting continues to increase with a variety of projectiles but the big game rounds I use in a year has been fairly consistent over the last 30 years.

Should have talk more about terminal ascent

Please do a cartridge talk on 358 Norma

I haven’t tried copper yet, but I’m thinking I might try. Does it cause more build up and require more cleaning of your rifle?

@VortexNation

3 ай бұрын

Nothing conclusive out there stating it leaves more copper as most modern projectiles have a thick layer of copper jacketing.

@justinsalzl1517

3 ай бұрын

I love copper. It’s performed fantastic for hunting. And shoots great for me as well. Enjoy!

You touched on it 😊right at the end are you may end up shooting a bullet say you didn't even plan on shooting because of your rifles individual characteristics. I have a 300 RUM that I have tack driving nosler partitions 180 grainers and I'm a huge fan of that bullet but only because of performance in that rifle. I want to try the cxs or the Barnes but I'm not going to because of possible fouling and I'm just not going to re- figure out low development for entirely new bullet

I'd absolutely subscribe to Booner Does

Still waiting for 6.5 grendel vs. 6 arc cartridge battle

@jmgates09

3 ай бұрын

TRUTH!!!

@ALovelyBunchOfDragonballz

3 ай бұрын

6 ARC is better, 6.5 Grendel is debatably more available.

What’s up with the SPAM on the shelf?😊

You make pure black powder. Its not hard to make. But its expensive to get in the mail. You might find some local but its still gonna cost a lil lil bit. They have good cheap, better alternatives to black powder that are not as sensitive to temperature or moisture and actually works well. And isn't corrosive to your gun. Thats the biggest part is not being corrosive.

The military does not have rules about bullet construction. The hogue convention covers expanding projectiles, but the US did not agree or sign that portion. There are some in the military that use hollow points. The reason the majority use fmj, is for pennetration capabilities, and low cost. Thats all, its not that hard to comprehend

@blackhawk7r221

3 ай бұрын

Ah yes, the effects-based prohibition on all bullets that caused “useless cruelty”. That’s all the US agreed to.

Why the pic of the character George castanza from sinfield on the shelf? Lmao

The market is driving everything (rifles and bullets) more towards target shooting (cheap accurate rifles and bullets), but go to Africa for serious hunting and they love more traditional controlled feed rifles and bonded bullets (they are reliable and consistently deliver the results)

I just want to know what is with all those tins of Spam?

The amount of info you all left out of this talk could fill two more podcasts of this length. Lathe turned solids. The brief foray into the TMJ expanding bullets. Monolithic non-expanding solids. More on the partitioned bullets like the nosler or the swift. Thicker plated bullets. Polymer coated bullets. Specialty lead alloy bullets. Sintered bullets. Segmented bullets. Bonded bullets won’t go away. They will become more niche. Just like the black powder analogy there will be a market for it but people will have to search it out. Dangerous game hunters will want it and be willing to pay the price. Just ask Hornady. They went to extreme lengths just to get steel jackets to sell bullets and ammo to dangerous game hunters. Heck lathe turned bullets are a thing too… I dare you to find them in any regular gun shop. I think bonded are a hard sell in our disposable society. It’s why we are seeing such an influx of cheap hunting rifles I think; lots of people want to buy whatever will work instead of spending the money for something tuned and optimized for the task. Why buy a custom built rifle and shoot premium bonded bullets when a ruger American and some Winchester Super X will kill the deer too? Some people will still want Swift A-Frames even if they are made by a single guy in his garage. I also think that the monolithic expanding bullets are a niche market. They also need cartridges and barrels designed for them. Wanna shoot 180 gr. Barnes bullets in a 30-06? The standard twist rate in a 30-06 is probably too slow for them. You’ll also lose some velocity to the loss in case capacity. Also, I’m pretty sure the old benchrest guy’s theory about flat based bullets was disproven years ago. If there was an advantage no short range benchrest shooter would use a boat tail design but that is not what has happened. Great episode.

Federal Fusion is by FAR the worst shooting round in my 7 Rem Mag. It was so bad I was certain something had broken in my scope or mount system. Had to go buy something different to ensure it was the ammo not my gun.

What’s your thoughts on a 220 eldx for a long range 300wmg load. Mostly target shooting but may be used for hunting

@BillyJoeBob3691

3 ай бұрын

I use the 225 ELD-M in 300 WM for long range target and hunting, and it has dropped properly placed shots on black bear and elk out to 600.

@garrettschienschang7898

3 ай бұрын

@@BillyJoeBob3691 thanks. What do you load them with?

@BillyJoeBob3691

3 ай бұрын

@@garrettschienschang7898 A press

@garrettschienschang7898

3 ай бұрын

@@BillyJoeBob3691 that’s a response I would have given. How about a powder type and charge instead?

@BillyJoeBob3691

3 ай бұрын

@@garrettschienschang7898 lmao glad you have a sense of humor, brother! Keep in mind I have a custom chamber, so start at 10% below… but my most accurate load is 72 grains of IMR 7828 SSC, over magnum primers, load to .020 off the lands.

🕵‍♂ In All Your Bullet and Cartridge Penetration Testing (Of Copper Bullets), Their is Something Important That You Missed in Your Evaluation! The Hardness of the Copper/Alloy Determines How Well the Bullet Opens Up and Penetrates! You May Remember That the 270 Wichester Copper Bullet Penetrated the Deepest, But Failed to Open and Tumbled on the First Shot? It is a "Balance" and Every Copper Bullet (of Various Manufacturers) is Made to a Different Hardness and Needs to Be Evaluated Accordingly! 👨‍🏫

Ryan. Do you know PMP ammo and bullets from South Africa. The company is useless with keeping up with production (go state owned company). But the product is phenomenal. Flat based hunting bullets, but mechanically bonded with an inner copper jacket ridge. The bottom part of the lead inner is a hard lead alloy, and the top lead is soft. Great accuracy, and awesome terminal performance. Just a shoddy (supply to the public) company

🇺🇸🇺🇸🇺🇸