In the menu "continuous welding" , it's much better to select 2 or 3 pulses instead of 1. So You have 2 or 3 impulses very quickly (some milliseconds) , you don't need so much power, the welding is strong without burning the stripe.

These tiny transistors how can hadle such high currents, I'm amazed! Very useful tool for your battery pack projects Brother ✌️

@ErCanEverything

Жыл бұрын

They are really powerful Brother🙌

Looking great 👍👍👍

@ErCanEverything

Жыл бұрын

Thanks Bro🙂🤝

Many Many Many Thanks

Thanks for sharing Keep up the good work

@ErCanEverything

Жыл бұрын

Thank you my Friend🙂🤝

Think they could supply a smaller display window?

Güzel ürün

Bom dia parabens muito bom

Super ❤👍👋

@ErCanEverything

Жыл бұрын

Thank you Bro🙂🤝

Nice video

@ErCanEverything

Жыл бұрын

I'm glad you liked it my Friend🙂🤝

Did you test with pure nickel or nickel plated steel? I wish you could test the Sequre SQ-SW2 the same way you tested this one. I can't find the current output for that one anywhere and I'm deciding between this one and the Sequre currently.

Bless it’s a little cotton socks 👍🏻

are you using pure nickel or nickel plated steel strips?

güzel makina küçük olması ragmen parasının hakkını veriyor profesyonel

Good Video It's making black spot Thanks

Ele solda bem a fita de 0.12mm na engrenagem 14 com 2 pulsos.

Hello, I bought this product, I thought it could charge my iPhone 14, but it didn't. I saw that you could charge your phone, but I couldn't. What is the reason for this?😂😂😂

Saygılar hocam iyi bayramlar türkiye için vergi ortalama nekadar çıkar bir fikriniz var mı

Friend, I have a bifrc dh30. I went to recharge it with a Type-C cable that I made myself but unfortunately I made the connections reversed in the Type C jack and ended up burning the spot welder board controller. Would you be able to tell me what model and specs the controller is on this board? It is that component that has 8 pins (4 on one side and 4 on the other). It is the only component that is visibly burned. I'm going to buy a similar controller and replace it with the burnt one. If you can help me thank you very much. Best regards

@ErCanEverything

Жыл бұрын

Will that help you? s.click.aliexpress.com/e/_EJnTaot Or should I send you the IC number from mine?

@ErCanEverything

Жыл бұрын

And sop-8 pin IC Number is "IP5306"

@francopieruccinifaria9454

Жыл бұрын

@@ErCanEverything Thank you so much for your answer. It really was important. I, however, did a check and the bottom part where the IC is located was completely charred and damaged, so it won't help if I change the IC, so I'll buy a machine like yours in the video and use my Bifrc dh30 plate as spare parts (mosfets, bus bars, connectors and lcd). Take me another question please... would the mosfets of my dh30 be compatible with your dh30 max? What is the model and code of these mosfets? Thank you again

@ErCanEverything

Жыл бұрын

@francopieruccinifaria9454 In the video they are visible, but you need to increase the quality to 4K. As far as I saw they are 5N04N010🙂🤝

@francopieruccinifaria9454

Жыл бұрын

@@ErCanEverything The curious thing is that in the link you put just in the 1st/2nd answer for the purchase of the power board, in the photos of the ad, the mosfet has the inscription 4N03L01 and has 7 pins (6 bigger pins and 1 smaller one that doesn't touch the board). My DH30's mosfet is like that too (6 pins + 1) with the inscription 4N03LR8. The one on your DH30 max v2 is apparently different. Are these 4N03L01, 4N03LR8 and 5N04N010 mosfets compatible with each other?

You should fully charge the battery before welding.

Was that pure nickel stip or nickel coated steel?

Ahoj, taky ji už mám a teď si chci přehrát nový Firmware 🙂

What is the battery type inside? Is it 3.7v 10000mah lithium battery or higher?

@user-wu1wi9nq1w

3 ай бұрын

Same question

@ErCanEverything

3 ай бұрын

3.7V 10000mAh🤦

Next video upgrade transistor mosfet 2 pcs... 😁😁

I am first and always better than my content bro ❤😂😢

Can it be used as a power bank as well?

@mrgeraldbrent

Жыл бұрын

5v, 2.4a

one slip pulling that strip and you'll slice halfway through your fingers

Like 🎉🎉❤

It's a shame the USB output is so low. I could have alot of use for this if it was better.

@ErCanEverything

Жыл бұрын

I saw 2.4A once but after multiple tries I couldn't get it to show the same. Maybe doesn't like the phone, but the phone supports 15W charging. This should support at least QC 3.0🤷

@DirtyPlumbus

Жыл бұрын

@@ErCanEverything yeah, if that output port was updated to USB type C it could potentially put out 12v and power all sorts of devices. If it were even capable of more like 5v 3a I could use it to power my power supply and increase it from there. It's just shy of being extremely useful. Still pretty good for a spot welder.

@johnrhodes3350

Жыл бұрын

@@ErCanEverything maybe you could try a different cable

@ericklein5097

11 ай бұрын

@@ErCanEverythingdoes the IP5306 support QC 3.0? I just checked it does not. It is the most basic type of bidirectional Powerbank board out there The discharge port is crucial it makes discharging the battery much easier

Can anyone recommend a spot welder suitable for 2mm pure nickel please

Bom bom bom dia paraben

@ErCanEverything

Жыл бұрын

Good morning👋

@mangjay80

Жыл бұрын

@@ErCanEverything good morning to

đen sì😅

great review! I have this spot welder and know its capabilities.

@ErCanEverything

Жыл бұрын

Thank you my Friend🍀 It's really very good🙌🙂🤝

😮😮😮😮😮

Minder RC

👀👀👀👀👀👍👍👍👍👍👍👍👍

güzel alet ama biraz pahalııııııı

@ErCanEverything

Жыл бұрын

Evet biraz pahalı.

One of many of these devices on Aliexpress. The output port is specified as 2A. Apparently he doesn't deliver. For this price I would not buy this device.

@Sweetaccord

2 ай бұрын

I agree. The FNIRSI SWM-10 is way better.

ayari bozdun 0.3 ms yapmalisin 1 ms yaptın buda 1sn takamül eder nikel şeriti yakiyorsun

Сколько стоит

10 ampere