I managed to fit this with the pin order I use (UR DR UL U dr x2 UR DR UL U dr dl ul ur ALL) and improve it a little bit! The 10 moves are the following: 1. UR: match U to L w/ UR, UL to L w/ UL 2. DR: match C to U w/ DR 3. UL: match C to R w/ UL 4. U: match C to D w/ UL or UR Next put DL pin up while doing x2 5. Repeat step 1 6. Repeat step 2 7. UL: match C to R w/ UL & DR to D w/ UR 8. U: match C to D w/ UL or UR 9. dl: match UR to DL w/ UL or UR 10. \: match everything to 12 w/ UL & UR Example from the scramble on the video
1. UR: +6 w/ UL & +1 w/ UR 2. DR: -5 w/ DR 3. UL: -2 w/ UL 4. U: -2 w/ UL or UR DL up while doing x2 flip 5. UR: +2 w/ UR & -3 w/ UL 6. DL: +2 w/ DR 7. UL: +3 w/ UL & -1 w/ UR 8. U: +2 w/ UL or UR 9. dl: +6 w/ UL or UR 10. \: -2 w/ UL & -4 w/ UR This adaptation has some improvements, such as on the first move for each face, you only have to look at 1 clock to which 2 clocks will move to, instead of moving 2 clocks to 2 different times. Also has an improvement for the flip, when you do the x2 you can start right away with the first simultaneous move Thank you for sharing this method! I almost average the same as with regular flip on 2 days of practice, definitely switching to it :)

@notmecubes

7 ай бұрын

I'm making an advanced 10mm video, do you mind if I put this version of 10mm in my video? I'll give you ample and complete credit for originating this.

@Mike_zb

7 ай бұрын

@@notmecubessure! no problem

@notmecubes

7 ай бұрын

@Mike_zb I alr released the advanced video...I'll make a 1 minute follow up going over your edit if it's fine with you

@Mike_zb

7 ай бұрын

@@notmecubes alright :)

@cubealgs101

5 ай бұрын

hi mike

10mm is just the Ortega of clock

@Techcubes_

8 ай бұрын

yea

@Coolpink1271_Gaming

2 ай бұрын

@notmecubes my pin order is DL UR UL U then I have ul down when doing x2 what would I do

@notmecubes

2 ай бұрын

@@Coolpink1271_Gaming If you switch to DL UR UL U dr, then everything in this tutorial can be copied, just mirrored.

@Coolpink1271_Gaming

2 ай бұрын

@@notmecubes ok

@abrahamjh5742

19 күн бұрын

7 simul: one-look Sheerin: cll I guess

After about a year of using flip, I got to sub-11. I tried to learn 7-simul, but I could not successfully do it even though I do BLD all the time. I found this, and after 30 minutes of practicing it, I'm sub-15. I look forward to keep experimenting with this and hopefully get faster. Thanks for the tutorial!

Wow, 10 millimeter is really cool!

@JudeStradtner

8 ай бұрын

real

Unbelievable, I avg around 9-10 seconds with optimised flip method. I'll try this method right away, let's see how it goes!

Wow! This method works perfectly & is easy to use! I will use this from now on

thats an amazing tutorial! I understood it so fast wow. amazing job!!

I TOTALLY IMPROVED!! THANKS SO MUCH!!!

@notmecubes

6 ай бұрын

Great job! Clock is an amazing event to improve in!

1:47, there is a mistake in the video, i meant to say while DR pin is up.

@Techcubes_

8 ай бұрын

th this video popped off =O

You are introducing a new mathod and you are literally doing fast pin moves and dail solving,....Just WOW.

Thank you so much for this tutorial it was very helpful

woah no way its Daniel Guerra

Woah this video is really good

@notmecubes

8 ай бұрын

tell that to the person who unliked this video after they saw it 💀

Thank you! 👍

Eddie Artze is so cool

@justacuberhasbeentakensadly

8 ай бұрын

should i try this methob

@TetraCubing

8 ай бұрын

no way its the squan opp parity ytwb holder and no longer uncrowned king

@cubingwithchens

6 ай бұрын

True

@CubeATime-AKAEddieArtze

6 ай бұрын

Thanks lol

@justacuberhasbeentakensadly

6 ай бұрын

no

very good method !

What would that be with the Pochman pin order DL UR UL L dr (or UR after the x2)? I kind of get the gist of the method (especially after trying to wrap my head around 7-simul) but it's a bit hard to follow.

the best tutorial

I'm serious about clock, as someone who mains the methods alyz, flip and optemized pochmann, I might add this to the list, looks good to use

@ninjaravioli

7 ай бұрын

Pure Flip is better

@ClockSolver

7 ай бұрын

@@ninjaravioli i'll flip you

@ninjaravioli

7 ай бұрын

@@ClockSolver ok daddy

@ClockSolver

7 ай бұрын

@@ninjaravioli ayo

@JudeStradtner

6 ай бұрын

Just use 7simul tho L

Bro this is the method I needed

@Techcubes_

8 ай бұрын

Glad you liked it!

@notmecubes

8 ай бұрын

Yess!!! Improvement in the near future. It's kinda unbelievable how much simul moves boost tps

I’m learning this so that if I fail memorising for Tommy 7 simul I actually have a good alternative method

Yo cool!

Do you have a PDF versión of the method?

I might try this. I did learn sheerin but with the pressure of an official comp my brain wasn't clear enough to do the calculations properly and just got DNFs.

damn this method is fun

@notmecubes

8 ай бұрын

Ikr simul moves my beloved

What skips would you prioritize? I've been preferring edge skips since corners are simul moves and should be fast anyway, and especially center skips bc that saves a D move

@notmecubes

7 ай бұрын

I would say you should especially prioritize edge skips such as c to u, as those eliminate d moves altogether. Also put complex skips in the front instead of the back. Some edge skip patterns require L moves and stuff such as that.

@Techcubes_

7 ай бұрын

in my opinion the U and L edge skip and C and U edge skips is my favorite, but corner edge skips are good too.

Wow this is a great method! What should I aim to average with this?

@notmecubes

7 ай бұрын

Sub 7 is very reasonable

I've learnt this but I'm struggling to get good times, I think it's because it's less intuitive than a normal beginner method. I guess I just need to practice.

So I have a really weird pin order for flip, It depends on lucky cases but I usually default to UR UL DL L, basically the same as what was mentioned but shifted by an F’ lol. What would you suggest for that?

@notmecubes

4 ай бұрын

On the first side, while doing the UL move to match u to r, match the UR corner with the right edge, to get your corner skip like so On the second side again, while doing the UR move, match the DL corner to the D edge clock. Finally while doing the UL move to match u to r, match the UR corner with the right edge. Finally, finish solving the cross, use dr to match UL with DR, and then do a / move to finish the solve.

@nikolascarpenter

4 ай бұрын

you here leaning clock before this weekend also?

@TheMagicCuber

4 ай бұрын

@@nikolascarpenter lmao maybe 😅

@cuberlucas

Ай бұрын

Omg it’s a Braden Richard’s comment hi lol

@TheMagicCuber

Ай бұрын

@@cuberlucas omg it’s Lucas 👋

Wow

my pin order is UR DR UL U . idk much about clock but i do want to learn this method. please tell me what i should do for this pin order

@notmecubes

8 ай бұрын

I would say there really isn't much to change. Your pin order is really just the pin order we used, just in a different order. You can match the UL clock to the L clock when you have the UR pin up on the first and second side, and you can match the DR clock to the D clock while you have the UL pin up on the second side. As long as you don't touch the DL pin at all when you are on the second side, you're good.

@aztryx1737

8 ай бұрын

@@notmecubes thanks!

My pin order is DL UL UR U dr how would i force the first corner skip

@notmecubes

8 ай бұрын

You would just mirror all of the pin orders and steps. All the URs become ULs, all the DRs become DLs. So you would match UR to R for the first corner skip, instead of UL to L.

@Techcubes_

8 ай бұрын

mirror the pin order

I'm a beginner to clock and learnt 10mm but no matter what I do, the cross at the back misaligned to the corners. Please help!

@CubingChaos-Liv444

7 ай бұрын

Same

@notmecubes

7 ай бұрын

This is usually because you're turning the DL dial on the second side, which you should not do

after i did the solve, the cross on the back (white) was not at 12, how do i fix thie?

@Techcubes_

8 ай бұрын

Hmmm, so did you match the corner skip?, if yes, then i would reccomend checking if you solved the UR corner on black to dl, then doing the \ and mathing up and down pins to 12.

@Techcubes_

8 ай бұрын

go to 3:15

@justacuberhasbeentakensadly

8 ай бұрын

@@Techcubes_thansk

@Techcubes_

8 ай бұрын

@@justacuberhasbeentakensadly No probs =D

I really like this method but due to my pin order which I am really used to, I can’t properly switch to this method. Can you tell me how to execute this method if my pin order is: DR UR R L U DR UR UL (all except UR for alignment to 12)

@notmecubes

7 ай бұрын

I don't think it's possible, as you use every pin on the clock in your pin order. For 10mm, you need one of the pins to stay unused.

Yoooo

Been practicing this method after switching from beginners and now I average sub 14 from sub 22 but haven't even gotten a sub 10 single yet. Do you have any tips?

@notmecubes

7 ай бұрын

At your speed, the real advice is just practicing.

@Techcubes_

7 ай бұрын

just work on recognition

when i finish the solve the cross on the back is not solved, why is this? i'm following the video exactly. and no, i'm not doing DL moves during the second face

@notmecubes

7 ай бұрын

You would have to send me a video of you doing the solve in order for me to know unfortunately

@theaverageiron

7 ай бұрын

I had a problem like that too. It might be with the slice at the end. You have to move the unsolved corners to 12 o’clock and not to the rest of the dials

@TheGrindingIce

7 ай бұрын

@@theaverageiron so at the end you turn the corners to 12 o'clock then do the slash?

@theaverageiron

7 ай бұрын

Turn the unsolved corners to 12 and the turn the solved stuff to 12

my pin order is DL UL UR R ul so what should i do?

@notmecubes

8 ай бұрын

This pin order is definitely not compatible with the method, the reason for this being the fact that your pin order has to be able to not affect one of the corners. For example, the presented pin order doesn't use the DL dial or pin at all. However, your pin order uses all 4 dials. I would suggest switching to the DL, UR, UL, U pin order, in which case you would simply mirror all the moves shown in the video, so that DL becomes DR and UL becomes UR, and vice versa.

@Techcubes_

8 ай бұрын

So if you wish, you can switch to a Mirror of this method, if you prefer starting with DL. the pin order would then be DL,UR,UL, U, dl . Then on back it would be the same, except you would do the other simul move with UR Is up, on the dl in. Reminder, your never going to touch the dr dial.

@Techcubes_

8 ай бұрын

@@notmecubes Mirror the one in the video is an option tho

but what is the method called?

@notmecubes

7 ай бұрын

10 move memoless

I think i have it down

"And then solve the clock"

@genevad4754

23 күн бұрын

yeah that didnt make sense to me either, at least tell us your thought process 😢

@genevad4754

23 күн бұрын

yeah its just forcing a corner skip but w flip

@anthonycubechester8961

23 күн бұрын

He probably meant solve the cross. Anyway there's enough information in the video to learn the method. I was a bit faster with sheerin but I dnf'd 50% of solves, which is unacceptable.

Hey! I use this order: UR DR UL U dr. What should I do in this method?

@notmecubes

8 ай бұрын

While you have the UR pin up, you can do the UL to L move, and while you have the UL pin up, you can do the DR to D move. Main thing is that on the second side you never have the DL pin up. feel free to ask if you need further clarification.

@sadmanmahfuzalam8786

8 ай бұрын

@@notmecubes did you mean match the UL dial to L dial? Thanks for the effort.

@notmecubes

8 ай бұрын

@@sadmanmahfuzalam8786 Yes.

I wanted to learn this but was too scared because the doc said don't use

@notmecubes

8 ай бұрын

7simul is definitely the best clock method if you are serious about clock. But if you're just doing it for fun, and don't want to take it too seriously, but still want to get decently fast, then this method is for you.

@sanpan-8

8 ай бұрын

I use 7simul but I still want to learn this for fun

@Techcubes_

8 ай бұрын

Learn it and be sub 10 ez

@JudeStradtner

8 ай бұрын

I got sub-8 with this in less than 50 solves lol. I average 6.5 now

@sanpan-8

8 ай бұрын

@@JudeStradtner 🤯

What do i do if my pin order is DL UL UR R ur

@notmecubes

6 ай бұрын

Unfortunately you can't use that pin order with 10mm. I go over this more in the advanced tutorial, but in order for 10mm to work, you have to keep one pin down during your solve.

@notmecubes

6 ай бұрын

may I suggest the pin order DL UL UR U dr, which is pretty much the mirror of this tutorial!

@EinoPlayer-sq4ch

6 ай бұрын

@@notmecubes I actually started using this exact pin order couple of days ago

I align all of my clocks but the back side is 2 hours behind

@notmecubes

8 ай бұрын

hmm, so something to keep in mind during the second side is that you shouldn't have your DL pin up at all during any of the moves that you make. if you use a different pin order that uses the dl pin, that may be a reason

@milt2

8 ай бұрын

@@notmecubes Thanks for that, I fixed it and now I am using the method.. from a 14 avg of 5 I went up to 22 but I think with some practice I can sub 10

@notmecubes

8 ай бұрын

@milt2 no problem! I'm going to make a follow up on how to do y2 and diagonal flips, with this method, so stay tuned!

@tetrawaffle337

8 ай бұрын

@@notmecubesmake sure to include lucky cases as well!

whoa no way i know you bhu- i wont say it

My pin order is very weird I do DL UL UR DR

@notmecubes

8 ай бұрын

Unfortunately that won't work for this method. I would suggest moving to a pin order such as that in the video. The reason that 10mm works at all is because, during a normal clock solve, you don't touch one of the dials. With my pin order, it is the DL dial. However, since with your pin order you use all of the dials, 10mm won't work.

@jan_kasprzak

7 ай бұрын

same thing here :(

i do UR DR UL U/L dr

@Techcubes_

8 ай бұрын

For 10mm, id reccomend trying to create a corner skip on DL, and a bar on C and D. Try mirroring everything but upside down. If this doesn't work efficiently, try the pin order in the video.

@notmecubes

8 ай бұрын

It should work the same if you only do U moves and switch away from L moves, and do dl instead of dr

@notmecubes

8 ай бұрын

While you have the UR pin up, you can do the UL to L move, and while you have the UL pin up, you can do the DR to D move. Main thing is that on the second side you never have the DL pin up.

Dude, u r going too fast Please make another tutorial, but a little bit mote explained xd

Bro what the heck do you mean as "solve it as normal" this is a freaking tutorial I do NOT solve the clock the same way as you I just see whats the easyest clock to solve and I solve that one?!!

@notmecubes

7 ай бұрын

Sorry, this tutorial is for people who are familiar with clock alr, and are ideally sub 12 with clock and have a fixed pin order. This is, after all, an intermediate tutorial. I would say get familiar with the basic beginner method first.

@rodrigoqteixeira

7 ай бұрын

@@notmecubes thanks but i am familliar to teh begginers method. I see what "clock" is better to solve and allign eveithing to that. But I saw you solve the clocks in a spessific order. I just wanted to understand that.

@notmecubes

7 ай бұрын

@rodrigoqteixeira top clock solvers usually have such a fixed pin order, which leads to easier lookahead. It's kind of the difference between using fmc techniques and using cfop in that regard. I highly recommend you switch to a fixed pin order.

@rodrigoqteixeira

7 ай бұрын

@@notmecubes thank you ill keep solving the 7x7 i received yesterday night (christmas)

@notmecubes

7 ай бұрын

@@rodrigoqteixeira yes!!!! big cubes 🔥🔥🔥🔥

Guys, unless you’re lazy, don’t do this. Do 7simul or else explode. (Also 10mm being awesome made me burst out laughing.)

@comp.lex4

7 ай бұрын

Completely missing the point. I don't want to learn 7simul, I don't want to memorize or do math during inspection for my least favorite side event, so this is literally perfect for someone like me

@notmecubes

7 ай бұрын

Frfr based opinion bro

@Techcubes_

7 ай бұрын

the point of this method is speeed utilizing simul move without memo. my best avg with this method is a 6.8 so ye, its decent.

Anybody know what potential this has? Like, sub-8 max? Sub-6? Sub-5 or sub-4 even?

@notmecubes

5 ай бұрын

It has at least the potential of flip