I have watched a few of these videos now. The cinematography and sounds as well as the background music is AMAZING. The music isnt loud or annoying, but chill and just white noise to me. (Plus the EXTREMELY satisfying print sounds). The prints are also awesome. You have definently earned this sub.

@Marc3DP

Жыл бұрын

Thank you so much 😀

Awesome! The peeking cat is hilarious i love it

You Are Good Making Videos! Dont Stop.

Very cool prints!

@Marc3DP

Жыл бұрын

Thanks :)

Short tipp from my experience: If you want the joints of the Moloch to move easier just add a bit of silicon oil. It's great for lubricating plastic.

@Marc3DP

Жыл бұрын

Thanks for the tip, I will check it out next time :)

@kimmicheau845

Жыл бұрын

And I agree with you because I didn't know that!

@kimmicheau845

Жыл бұрын

I meant that I didn't know that but now I know!

my favorite print from this video was the ball machine. it was just so satisfying! could you do Squiddo?

These are really cool!

@Marc3DP

Жыл бұрын

Thanks :)

Woow Super cool 3d prints, Keep it up

@Marc3DP

Жыл бұрын

Thanks :)

Nice prints 😊

@Marc3DP

Жыл бұрын

Thanks :)

Cool. Thanks

Wow its cool prints

@Marc3DP

11 ай бұрын

Thanks :)

Great!!

Nice!

Wow the ghost with legs was the coolest

3D3D3D3D is my favorite thing!🎉

Nice video! the ghost with legs is really funny to me, just imagining some unsuspecting person picking up a cute little ghost figure and then bam! secret legs! hilarious also, i would be ecstatic if you printed out my name! (Elizabeth)

Please support me with a Like and Subscribe If you like my videos 😊 And tell me what name or nickname print next? 😉

@SebaZ-O

Жыл бұрын

I like it better when you show the animation of how the figures are created from the bottom up. I like your videos, greetings from Colombia

@delonperera8634

Жыл бұрын

Delon

@cakeman624

Жыл бұрын

Andrew

@geoffstone356

Жыл бұрын

Geoff please

@brenoweslley4662

Жыл бұрын

Breno

Ah man it would be so much cooler if I had a 3D printer

Loved the pumpkin, but I would find a way to put a randomly pulsing led up inside it. The print itself was awesome!!

@spideyprince7077

Жыл бұрын

There are Electronic Tea Lights with that function, maybe that looks good enough? And they have batteries.

@keoladacalio

Жыл бұрын

And you can get a pack of 24 for like 5-8$

@Marc3DP

Жыл бұрын

Yes, I should have used smaller led and put it in, it was designed for it, unforunately I did't have any :)

Hi, what settings are you using in the slicer, and what z offset, the prints came out really nicely

@Marc3DP

Жыл бұрын

0.2mm QUALITY in PrusaSlicer

Can you please do Kodi ! Love the content though keep it up

The guy with the shiney filament hehe

This is like those magnetic ball vids, likeasmr but it's actually good

Możesz zrobić film z jakimiś ciekawymi wydrukami na Halloween?

Great video! I love the S1 Pro! What silk purple filament did you use for the demon bookmark? Thanks!!!

@Marc3DP

Жыл бұрын

Thanks :) This is Creality Silk Purple PLA

@nelsonl2136

Жыл бұрын

What is the setting for the Creality Silk Purple PLA, I just printed out and it glued onto the Ender 3 bed...sigh

Me encanto todo... voy a tener que imprimir algo de todo eso, el fantasma lo tengo pendiente para impresion....pronto lo voy a hacer. SAludos desde Argentina....

Hello Cool edit and nice items

@Marc3DP

Жыл бұрын

Thanks :)

Can you please do tugboat I’ve asked 5 times! Love the content though keep it up,

Like it a lot most of all the ghost with legs... Could you do "Puteam"

I'm new to 3D printing. Could you get the same quality with the standard Ender S1 or do you need to have the Pro? Thanks

@Marc3DP

Жыл бұрын

I never used standard Ender S1, but I think the quality should be similar

Loved the cat especially - so simple and so .. eh.. perfect 🥰

Amazing 🤩 👍👍👍👍👍

@Marc3DP

10 ай бұрын

Thank you :)

your videos are cool

@Marc3DP

Жыл бұрын

Thanks :)

I loved all of the 3d prints, and you defintly earned youself a million dollars(sad that i don't have).

@Marc3DP

10 ай бұрын

Thank you :) Hope some day I could earn 1 million $ ;)

7:25 Great choice for the book :D

@Marc3DP

Жыл бұрын

Thanks! BTW Alberto Angela is one of my favorite author :)

Were do you find the ball machine is it on printables or thingiverse or other.

How do you split up the ball machine for printing?

my name is elliot and i love your videos so much

Great vídeo. What is that squared light you used?

@Marc3DP

Жыл бұрын

Thanks :) It's Ulanzi LED VL49

How did you get your print out from the bed so easily??? May I know your setting? Thank you.

@Marc3DP

Жыл бұрын

I use 0.20mm QUALITY settings in PrusaSlicer. Moreover it is thanks to the Ender-3 S1 Pro sheet. When it cools down, the prints practically go away by themselves

Please can you share stl for name Valentina and Bosco? Thanks!

where did you find the ball machine?

Hey love your videos, just wanted to ask what slicer do you use?

@Marc3DP

Жыл бұрын

Thanks :) I use PrusaSlicer

@JadDarawsha

Жыл бұрын

@@Marc3DP Thanks!! will start using it!

Il libro di Alberto Angela ti ha tradito 😁😂😂😂

If you want a challenge you should print dicemistry someone else asked for it and I think you should do it fr them

thinking of getting a ender after this video

@Marc3DP

Жыл бұрын

It's really good 3D Printer :)

You could also print the balls out on a resin printer as complete spheres.

How do you get your prints to stick properly without using glue ? My bed is level and heat bed temp is fine .

@Marc3DP

Жыл бұрын

I use Prusa and Creality PEI sheets and in both there is no need to use any glue.

@stevenragbir7807

Жыл бұрын

Thanks for your reply , also in your earlier comments before you replied to mines , I tried the prusa slicer but the Z comp tends to probe the bed before it prints and sometimes it Z offset raise while printing and cause the filament to “noodle” up . Is that a settings to adjust ?

Hi, what do you recomanded please? I hsve ender 3v2, but i have a new, biggest printer. and i can not decide witch one. Do you recomand me the Creality CR6-SE, CR6-MAX, Ender 3s1 plus/pro or the anycubic kobra plus? Thank you

@DANIEL-nq4qi

Жыл бұрын

*want

@Marc3DP

Жыл бұрын

I have only used Ender-3 S1 Pro from these 4 printer , but I'm very happy with it and I can condifently recommend it :)

Can u make a video for the anycubic cobra

Share your support settings on pumpkin please

Could you print with a prusa

Can you do Dahen please

Omg where do you find the file for the ghost I can't find any

@Marc3DP

Жыл бұрын

All links to designs are in description :)

These are pretty cool, but could you do some awesome star wars prints?

@Marc3DP

Жыл бұрын

Maybe not full video about StarWars but I think I can make some prints in one of the next videos :)

Can you please print VaperSithLord?

I have the S1 pro now for 1 month. Nothing sticks to the the Bed. I have to use blue tape the whole time to print at all. Can you give me a tip ?

@KicksOptional

Жыл бұрын

I started wiping the springform bed with rubbing alcohol before every print, this helped out a ton. Also, using a brim setting for warping and adhesion helped.

@Marc3DP

Жыл бұрын

For me it's sticks great. I use Isoproponal alcohol before every print. Also you should check if printer is dialed well. And finally I use PrusaSlicer.

@user-sn3kv4zl2f

8 ай бұрын

Yes defiantly use Isopropyl Alcohol after/Before every print I use ISOCOL RUBING ALCOHL . @@Marc3DP

Do you print mostly at 0.2 quality ?

@Marc3DP

Жыл бұрын

Yes, 95% off all my 3d prints is 0.2 quality

Hi :) I wanted to print : Upgraded Living Can you send me a file for the slicer 🙄 I like your video great Ideas 😊

I have 3s1 pro! I think its VERy good printer

@Marc3DP

Жыл бұрын

Yes, it is :)

how do you get the prints so good??

@Marc3DP

Жыл бұрын

Good well dialed 3D Printer + PrusaSlicer 🙂

Amazing printer! Thank you for sharing! Could print my last name? IXTA :)

Mon Cheir

Circuit brain is awesome where can I buy the stl files

@Marc3DP

Жыл бұрын

Links to all STL are in description

@MicrobyteAlan

Жыл бұрын

@@Marc3DP - okay thanks, I didn’t look far enough down the page, good stuff thanks.

Maybe he will print one of my designs also hehehe.

RANDY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and how do buy it ?

3D🎉😊👍🏻🙏

dude! Its my name!!!

Ples do SultanSkip ❤ love yur channel

Can you please share the link for this hand model?

@Marc3DP

Жыл бұрын

All links to files are in description :)

I stream on Twitch as theonetruefester and would love to see Fester printed out. Would give you a more unconventional name to print!

Can you please do Azrael

Hej, deine Prints sind echt Super, gerne würde ich den Namen DEKO-SERV ausdrucken, das wäre mega.❤

Do you think you could make a 3d printed lightsaber from star wars jedi fallen order?

Where I can download the files from the hand bone

@Marc3DP

Жыл бұрын

All links to files are in description :)

I’ve tried a few of these prints. The more I try them, the more I realize this guy has his printer dialed in 10/10. I can’t get many of these to work right.

@Marc3DP

Жыл бұрын

Yes, good and well dialed 3D Printer is crucial. I also recomend to use PrusaSlicer. Good luck with your 3d printing 🙂

Can you 3d print Mr.Peeperson as the your name print

can you print “unintoxicated" for me plsss

Kacey or Surge, please?

Can you please do DICEMISTRY? This is my fourth time asking. Please

@yagamerboichucc6120

Жыл бұрын

I’m gonna start asking him to do it to double the odds we got this

@puppyburrito

Жыл бұрын

@@yagamerboichucc6120 yes! We can do it!!!

@Draconic404

Жыл бұрын

What is that?

@yagamerboichucc6120

Жыл бұрын

@@Draconic404 Idk but join the gang we just gonna keep asking him to print the word Decemistry until he does

@spk8989pl

Жыл бұрын

It needs to be asked 96 times including 7 times for 4 consecutive Fridays. After that special symposium takes place that will monitor regular requests from 10.000 users on regular basis in agreen calendar. It is similiar to religiin. After that when you give all your time you will get nothing.

Oscar is the name

Am I missing something? how is it those gold balls are acting like magnets? Anyone tell me?

Can you 3D print a skeleton hand for me pleasezzzzz!

Please do William Afton!!!!!!!!

Where can I find the models to download

@ICantThinkOfAUsername

Жыл бұрын

The description

@Marc3DP

Жыл бұрын

All links are in description :)

Can u print riley

Could you do the name “Levi”

If you accidently step on that Moloch Horridus

Could you print "STayl" as a nickname?

Could you print the name Renata?

I want one,but I don’t have 3D printer

Please do falcon that's my nickname

Pls 3d print Mr. Hee Hee

can you 3d print Liam? please!

Love your videos could you make my name please, Allie or Dusti thank you

Crimson

Can you make a PlayStation 5

Jaswanth

Name:pep

Make a captain America action fighter

@Marc3DP

Жыл бұрын

Maybe in near future I will make some action figures :)