I enjoy your videos. You speak slowly, clearly, and intelligently. Carry on. I'll go too..

Here in Canada, the reason everyone had a 303, was price. I have heard many stories of people walking into a big department store and choosing a 303 from a wooden barrel full of 303's, and the price was $15! Keep in mind that a Winchester mod. 70 was $150 and wouldn't kill a moose or deer any deader. Everyone wanted a Winchester or Mauser in 270 or 30-06, but at just $15 for a very tough rifle with a little less power than a 308, and a little more power than a 300 Savage, the 303 fit the pocket book best! Great job so far on refinishing your 303!

@vincethewoodlander

11 ай бұрын

That's pretty much why I got mine as a teenager. Found myself in need of a rifle without much cash. Luckily there was a large surplus dealer near me.

@peterhambleton7649

7 ай бұрын

303 and 308. At 100 to 200 yrds,no deer can tell the difference.

Thanks for putting out this video. For me it could not have come at a better time. I had started work on a poorly sporterized lee-enfield 1916 BSA MK III* that a friend sold to me for 50$. Found a beautifully grained old Bishop walnut stock for it that I finished with multiple coats of linseed oil. I too wanted to replace the original sights and install a barrel band but come up short on courage. Now you have inspired me to continue with the project. You’re doing some really nice work, can’t wait to see the end result. Thanks

@vincethewoodlander

11 ай бұрын

Thank you. It'll feel good to revive things. Good luck

My dad bought 2 .303 NO. 4 Mark 1's in 1961 for $11.88 each...I still have one of them...shot a big buck in November 1970 while in HS with it. I have not fired it in 52 years, but may use it this year for deer hunting...no need to test fire it...I know how it hits...

@vincethewoodlander

8 ай бұрын

It's a nice thing to have good memories tied to a gun you carry when you're in the woods. Good luck. Thanks for watching.

Excellent information.

@vincethewoodlander

18 сағат бұрын

@@concernedaussie1330 thank you

I bought an old 1905 BSA 303 for 5 pounds when I was 16. That thing used to singe my eye boroughs every time I fired it! I moved on and traded it and now I have a selection of 303's SMLE and No.4's plus a No.4 (T). Just gave my son a .25/303 SMLE and a 270/303 P14. Fantastic round and great rifle. I hand load with BARNAUL 125gn SP at 2,750 fps. Everything I hit falls down! The .303 Brit has killed more game around the world (including elephants) than any other cartridge. Nothing wrong with the old ones.

@vincethewoodlander

8 ай бұрын

Agreed... Nothing wrong with the old ones. Thanks for watching

Nice upgrades .

@vincethewoodlander

11 ай бұрын

Thanks 👍

Well done, I fully approve of what you are doing. After seventeen million of them there can't be much wrong with a smelly, it'll get the job done.

@vincethewoodlander

11 ай бұрын

Thank you. I agree it's a good rifle with outstanding history. Thanks for watching

Ah yes! The good old days when every major city in England had a world renowned gun factory 😂👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

@vincethewoodlander

9 ай бұрын

Don't worry. History will repeat itself. Thanks for watching.

Nicely done

@vincethewoodlander

7 ай бұрын

Thank you

beauty job its going to turn out awesome i bet!! personallu i would not have reblued the barrel! I would have really polished it and made it chrome looking!! Just my 2 cents

@vincethewoodlander

4 ай бұрын

I do like the look of "bright" barrels but have no experience in maintaining them other than in my old flintlock rifle. Thanks for watching.

Bellissima arma il 303, io posseggo un Lee-Enfield n4 mk1 del 1943 modificato dalla Parker Hale nel 1948 per la caccia. Lo uso in Italia con grande soddisfazione per la caccia di selezione ai cervidi e cinghiali.

@vincethewoodlander

9 ай бұрын

Grazie...I think they're nice as well. Mine has killed quite a few deer too

Great video Sir! These old gals are simply awesome! Judging from your comments we are the same age. My experiences are similar to yours. I have a No4Mk1, but have recently added a No5 Jungle Carbine. Today, when I handload, I generally load down a tad.....174 gr JRN @ 2150. Our Florida distances are quite close....50 yds+/-.... & our deer aren't particularly big or tough. But then again, I am not either anymore. Love the content.

@vincethewoodlander

8 ай бұрын

Have you reloaded any 150 or 180gn bullets? I've had some good luck with 44.2 gn of h4350 but this last batch of imr3031 frustrated me. Looking for any advice if you've experience. Thanks and thanks for watching!

@steveh4962

8 ай бұрын

@@vincethewoodlander I have been using Hornady 174 gr JSP's and PPU 180 gr JSP's over 37.5 grs of A4064. Not a fan of recoil anymore 🙃. For my Jungle Carbine I took off the way too short (for me anyway) buttstock and replaced it with a spare #4 butt/brass buttplate. Am heading out tomorrow to restock the feeders and will have this along with me. Five gizmos I have in my ".303 toolbox" are 1) broken shell extractor, 2)front sight adjustment tool 3) firing pin takedown tool 4) long slotted screwdriver for tightening the buttstock and 5) standard length reversable 2 bit screwdriver for all other screws. I carry a 2nd broken shell extractor in the butt trap along with a modified boresnake. For my purposes, I have found that the 3 point Galco Ching-sling is the best way to get off an accurate shot. Sorry to ramble. But .303s are addictive.

I love the Enfield rifles, I am glad yours performs so well, how tight does it group compared to the original? as it looks like the original lightweight barrel, am curious as the reason for the stock going all the way up to the end on the Enfields it to give downpressure to compensate for the lack of stiffness, usually at the muzzle for the sake of accuracy... on the early ones it was complicated but adjustable with springs and the no.4 it was done with just pressure on the nosecap about 2-4 lbs if memory serves not worked on one for a while but its one of the secrets of its accuracy, nice job though and I know how much time it takes to get things like this right, so this one is definatly a labour of love but it will outlast you...

@vincethewoodlander

8 ай бұрын

It has always been sporterized since I bought it in the early 90s so I'm uncertain of the accuracy difference. You're the second person to mention the up/down pressure and I'm curious to find out why the physics of that helps. I was always under the impression that free floating and letting the harmonics happen as they may was best versus worrying about barrels whipping around. I am open to and would love new knowledge or information. Thanks for your help in advance and thanks for watching.

I just got a Parker Hale Hunting Rifle dumped on me. It might look nice restored.

@vincethewoodlander

11 ай бұрын

I always liked those. It would look good.

So, you had to jump a horse? Why wouldn't he move out of your way?

@vincethewoodlander

11 ай бұрын

Lol, that's funny! Seriously. wish I had a good joke to give back but can't think of one.

Great choice for sure. It will put a lot of food on the table without breaking the bank. My only ? is continuing availability of ammo.

@vincethewoodlander

8 ай бұрын

Agreed, I'm currently struggling to find a good reload. Thanks for watching

@MENSA.lady2

8 ай бұрын

My pleasure. two minds thinking alike.@@vincethewoodlander

Thank you ti sharing this video, I would like to kwo what type of butts stock and foreharm did you put on your rifle. i did check for 303 ans i can not find one like yours,. Fernand

@vincethewoodlander

8 ай бұрын

The forehead was the original when they sporterized it. The butt stock I got from Boyd's gunstocks. They do sell forends for them too. Hope that helps. Thanks for watching.

@scienceapis3219

8 ай бұрын

Thank you very much, have a good day

A question. Why dies the heavier bullet lose energy more quickly? It would seem that a heavier bullet would carry its punch further due to heavier mass and perhaos lower air friction if the muzzle velocity is lower.

@vincethewoodlander

9 ай бұрын

The lower energy is caused by the lower initial and extended velocity in the bullet with more mass.. It has to do with the mathematical formula for kinetic energy. KE = 1/2 MV^2. If I double the mass (M) energy will double. If I double the velocity (V), energy will increase 4x because velocity has an exponential factor (^2). If both bullets hit the target at the same velocity the heavier bullet would be able to do more Work. This would allow it to penetrate further because it exerts more Force against the target but that's a lesson for a different time. Lol. You made me dig up some buried knowledge to explain. Basically the lighter bullet is going faster and possesses more energy. I hope it helps. Thanks for the question.

When do we get to see you hunting the Enfield?

@vincethewoodlander

7 ай бұрын

Been busy lately with construction and hunting but I've been working up loads, practicing this whole time and planning on deer hunting with it next week. Hopefully I get it on video. Thanks for asking and watching

so - what does all the ballistic data have to do with refinishing the rifle

@vincethewoodlander

9 ай бұрын

Not a pro here but I had to start somewhere and by knowing the rifles ballistics and what round to shoot, I could then know how to pick and how to adjust or file down my rear sight which I was putting on the rifle. Ballistics are simply where I chose to start. Thanks for asking/watching.

Boy, you have done nice job but at the end of the day you spend more cash refining this gun than a modern second hand rifle.

@vincethewoodlander

4 ай бұрын

Thank you, you're probably right I didn't do the math, but that's usually how this stuff goes. I remodel lots of houses for sentimental people. However more than money was involved. - I was stir crazy bc of the ribs and I'm used to using my hands daily - the rifle is nostalgic for me, I've owned it over 30 years and killed lots of deer - I wanted to try something new Truthfully, I was paying for more than just a rifle although I can't count it with numbers.