Excellent video. I have the older QCX+ and I love it.I have worked all over Europe from here in Florida USA on 40 meters. Antenna is a half wave end fed cut for 80 meters and strung to the top of a pine tree in a V configuration. All the very best, N2SN.

The QCX mini never fails to impress. I've never tried it on a pp3 battery. Great idea 👍

brilliant video! Every year when you change your smoke alarm batteries you could have a blast seeing how many contacts you could squeak out of the old batteries. A very heart felt thank you for sharing as always.

A great video as always. I'm amazed at how much can be achieved by so little.

Astounding, truly a good proper efficient antenna with a 100w rig is more than enough to work the world.

Great stuff. I love watching about QRP proving that not a lot of power is needed to get out. G4GHB.

I remember reading about someone at Arrl years ago modified a HW 8 to put out 10 milliwatts and got Worked all States. My best was a Tuna Tin transmitter running a pair of 2N3904s on 40 meters. St. Kitts.

Excellent "probe" into just how far one can carry a fit of QRP mania. Seriously, a big part of the success was the care that went into making the end-fed antenna and deploying it. An old hand at this gave some great advice recently: use a RESONANT antenna, well-matched to the transmitter. Any inefficiency in the whole system will significantly affect results at this power level. Great video.

@Q26Video

Жыл бұрын

Thanks George - I agree, and all my antennas so far with getting back to radio have been resonant wires that I have made for one or two bands. Glad you liked the video and thanks for your feedback. 73 from Mort/G4BSK

Thank you for a very instructive video on the QCX Mini. I may be buying one in the next month for 20m and your comments were appreciated. 73.

@Q26Video

Жыл бұрын

Glad it was helpful!

That’s awesome, you are inspiring me.

Very cool idea... 73 de Brazil 🤘🏽

I love the QCX Mini…. I wish they would extend the case to accommodate 3x 18650 cells, and a BMS. That would be amazing…

@Q26Video

Жыл бұрын

I've just tried this Tom with a 3D printed cover - works well and I hope to show it in a video soon. Thanks for your feedback, glad you enjoyed the video - 73 Mort/G4BSK

I love qrp 73

Really cool. What QRP was meant to be..

Interesting game, hope to meet you next year =)

@Q26Video

Жыл бұрын

Next time I will make a trx specially for the game 😁

Realmente emocionante 👏🏻 72

@Q26Video

4 ай бұрын

I watch all your videos - awesome! 72

Nice video, thanks for sharing! 73 PA5BAS

Alkaline batteries have very high internal resistance and normally limit power out to about 1 watt or so, LNR Mountain Topper users have known this now for some time but using a rechargeable type of battery such as some of the hobby RC airplane/car types or the very popular Bionano battery 9-volt pack will give you more power out. I am pretty sure you were averaging about 1 watt based on my own experience using an alkaline 9-volt TV remote battery, I have used them many times in the past and lots of fun to see how long you can last. Great video and great fun to test the limits, keep up the great videos. 73 J

@Q26Video

Жыл бұрын

Glad you like the videos - thanks for your feedback and info - 73 Mort G4BSK

Just the rig I'm looking for, but not sure if I'm allowed to use it at Foundation Level?

@hamradiofun5527

Жыл бұрын

I think you would be okay, definitely check with your local club

@Q26Video

Жыл бұрын

I had a look at the license terms - and at first glance it seems like the FT817 would be ideal. It's so versatile, you can cover just about any mode or band. They go for around £300 to £400 pounds SH and represent a very cost effective way into amateur radio. I hope it all goes well for you, 73 from Mort / G4BSK

@PreparednessVeteran

Жыл бұрын

@@Q26Video That's valuable info to me many thanks (M7PVX)

Is your antenna wire connected to both black and red posts on the transformer? Couldn't see in the photo

@Q26Video

Жыл бұрын

Hi Jake - just the red one - I put two connections on the antenna to give the option to connect a radial or ground but it hasn't been necessary. With these very small, low power end fed half wave antennas I haven't found that necessary so far. There are very good videos about making this type of antenna and the traps by K6ARK (a great channel) - instead of trying to make them super small and light like he does, I have opted for a winding bracket and insulators to help me take them out in the field, all 3d printed. Best wishes, Mort / G4BSK

I did a similar test in August of this year with my 40 meter QCX mini. The plan? Work 1 hr. at 9v/200mAh with 2 watts #parksontheair #pota activation. Results? 23 #QSOs 11 states in 50 minutes on 40m. Still had 8.10 Volts left after 50 minutes. From Kentucky in the U.S. had contacts from WI, VA, NJ, D.C., NC, FL, just to name a few. Only stopped because I had to leave.

@Q26Video

Жыл бұрын

That's great Jim - it's always encouraging to hear more QRP success stories !

Does it have SWR meter?

@Q26Video

2 ай бұрын

You can find out all about the QCX Mini here : www.qrp-labs.com/

👍❗️73. KV5P

excellent video and lots of information about a radio i have just sent for, after watching this video. cheers : brian zl3xdj.

@Q26Video

Жыл бұрын

Thanks Brian, I'm sure you will love your radio - good dx and 73 from Mort G4BSK