Very cool seems like the guy in the car really knows his shit.👌✊🏻

Nice fox body over there!

Tuned by TBA Racing/Two Brothers Automotive in Houston

@dubzybc5457

3 жыл бұрын

Fake ass comments I've seen those 2 exact comments somewhere else

really nice car good job! that 1.8T engine is one of the best for tuning, invincible 😁👍

@gasscooterdude

5 жыл бұрын

*cough* VR6 *cough*

@mastersamoyed6040

Жыл бұрын

@@gasscooterdude not easy to tune that much tho

I love the Car and Setup, do the same here in Germany with a gtx3076. Please more from the Car, especially with the Speedo cam!

@ujrfkeids

4 жыл бұрын

What ar do yo run want to put a 57-76 with 48 ar on a 2.5L v70r m66 Hope's for full boost at 3500 rpm 23 psi

Awesome work boys!!!

Stay tuned......no pun intended, haha

Yes, you have a lot of power but only from 6k to 7k it will be a little tricky to drive

very nice, i have a 5 cylinder 91 coupe quattro (s2 clone) thats getting the big boost treatment, i also have a fwd b6 a4 as a daily that ive been thinking of doing something too, someone recently gave me a dual ball bearing 57mm billet turbonetics turbo and it got me thinking

@martaprobala2946

5 жыл бұрын

Hi.have you done this power upgrade to S2....

hey man nice setup!! Im building a mk6 R and need to get it tuned, i'm in dallas.

@baccaratplaza3473

2 жыл бұрын

And boss?

hiii, nice project , ve one question , this engine is mesaure standart but forged ??? you change de cat cams ??

700 hp GTI NNNIIICCCEEEE

what upgrade you did on you car?

are you running a aftermarket throttle body?

I like this wheels bro!Can you tell me mark of wheels?

4:25 to 4:57 That idle sounds insane on subs hahah

Build specs?

1.8 + 3071 = boost for all of 0.5 seconds

@hotsnatch2003

2 жыл бұрын

lol! It can rev out to 8500, so maybe 2 seconds.

@krisjones0926

Жыл бұрын

you have no idea what youre talking about

Build list?

What is your setup?

Full boost at 5,500 Rpm's?

Any internal work done on the engine to support the turbo ?

@ohyeahyeah1400

3 жыл бұрын

Ik its a really late reply but the stock motor only supports 320-330whp so definitely.

how easy/hard is it to install the 80mm hemi throttle body?? what would i need to adapt it?

@hotsnatch2003

7 жыл бұрын

I purchased it along with the Integrated Engineering large intake manifold, which already has the 80mm plate on it. I believe they also make step-up/step-down plates to fit the 80mm TB to a stock intake mani. Check their site: www.performancebyie.com

Mod list?

How much PSI?

What are the specs on the turbine housing? .84 A/R?

@deathmetalscottie

7 жыл бұрын

I didn't get far enough down. Just read .63 a/r. Killer!

What kind of wheels? They are sickkkk

@hotsnatch2003

2 жыл бұрын

These are Miro 111: www.europeanroadandracing.com/product/18-inch-miro-type-111-silvermattte-black-5x112

Will this be compatible if I was to place it in a Lancer GT

@hotsnatch2003

2 жыл бұрын

Contact Two Brother's Automotive in Clear Lake, TX and they will let you know.

Would this be the same 1.8t that's in a 05 Passat?

@hotsnatch2003

7 жыл бұрын

Yes, it's the same engine.

hey what kind of rims you have?

@hotsnatch2003

3 жыл бұрын

Sorry for the late reply, I hardly check this channel. Those are the Miro 111's.

why the boost come so lazy ?

@Sruikyl

6 жыл бұрын

Because its a 1.8 spooling a large T3 capable of 650 horsepower..

do you guys know a good place here at LA? thanks /...

@hotsnatch2003

2 жыл бұрын

Unfortunately, no. Good luck with your search!

What a/r is your turbine housing?

@hotsnatch2003

7 жыл бұрын

.63 for such a small motor

@BobbyChubby69

3 жыл бұрын

You got 26 psi by 5500..I have a gt3076r and I got 26psi at 4000rpm!I don’t think you got the .63ar.Mabe 1.06.a/rOr your tune realy suck

How much do u think u could get out of an ea888 gen 3?

Built motor?

Where are you from? I have a 02 gti with a gt3071r and I'm looking to get dyno tuned but no one where I live does it

@hotsnatch2003

7 жыл бұрын

I'm in the Houston area. Where are you? I might know some places in your area.

@rickystone5088

7 жыл бұрын

I'm from Vermont. :(

@hotsnatch2003

7 жыл бұрын

You're about 500 miles or so from RAI Motorsport. They specialize in all Audi/VW big turbo applications. You might give them a call and see if they can schedule a day for you. Check them out here: goo.gl/maps/pKj3abTFrv82 It's worth the drive.

@rickystone5088

7 жыл бұрын

hotsnatch2003 ok thank you. When I get my car out of storage I'll definitely give them a call.

Boost threshold is good, but response was really laggy. Didn't hit full boost until like 6K. Not knocking you, but I'm a bit disappointed since I'm considering the Gen 2 of this turbo.

@hotsnatch2003

3 жыл бұрын

All but 8 valves were bent when this was filmed, so the boost was leaking through the motor bad. That's where all the smoke was coming from, too. We have it back together, but we've yet to get it back on the dyno. Other things have taken priority. I'm expecting boost to come on quite a bit lower and well over 500whp once we get it running again.

Did you ever figure out the oil issue? I am having the same problem. When i dig into boost hard (im set on 24psi) I puff a cloud of smoke and smell oil bad. But when I stay in low boost, nothing.

@deadstick2150

6 жыл бұрын

What colour is the smoke? If it's white your turbo is pushing oil into the manifold, if the smoke is black then is just over fuelling.

What ever happened to this?

what software?!

what internal upgrades are done to the motor?

@madscottishmtber2093

6 жыл бұрын

isaac murdock none by the looks of it

@lordcanti2921

5 жыл бұрын

Atleast rods if they are trying to make over 300wheel torque

Stock motor?

@hotsnatch2003

2 жыл бұрын

Fully built. Lower compression Mahle pistons, IE rods, Ferrea +1mm valves, springs/retainers, 80mm throttle body, huge IE intake manifold, 1000cc injectors; it's ready for anything I throw at it.

What rim is that?

@pplrneg

7 жыл бұрын

Miros

@hotsnatch2003

7 жыл бұрын

Miro 111

Why you only hitting 125mph?

@hotsnatch2003

2 жыл бұрын

That might be the top of that gear. You tune in the gear that's closest to 1:1 ratio.

rims ???

@hotsnatch2003

3 жыл бұрын

Miro 111's

whats going on with this??

@hotsnatch2003

2 жыл бұрын

Long story, but it's still at the shop. We ran into some issues with the AEM ecu and it's gone on the back burner for a bit.

what rims are those?

@djSiMuL

7 жыл бұрын

Miro 111's staggered 8.5" up front, 9.5" in rear.

@willielategan693

4 жыл бұрын

Been looking for a name on these wheels for ages. Finally got it, thanks so much man!!🤘🏼

All very good but the front of the car will look rubbish!

@hotsnatch2003

2 жыл бұрын

How so? The OEM bumper will fits.

what are those rims?

@butterz4057

7 жыл бұрын

look like xxr's

@pplrneg

7 жыл бұрын

Miros

@hotsnatch2003

7 жыл бұрын

Miro 111

@mikeg8494

7 жыл бұрын

thank you

automatic?

@hotsnatch2003

7 жыл бұрын

This is the 20th Anniversary Edition GTI, only 4000 were made for the USA and they all came with 6-speed manual transmissions.

@alouisgene

7 жыл бұрын

hotsnatch2003 thankyou for the response

@tylerwill5250

7 жыл бұрын

Well hello. Im number 3076 lol i wish i had 400hp

@hotsnatch2003

7 жыл бұрын

That's a good number, especially since that's a great turbo to match up with this engine (GT3076R) :)

@shaqoneill8069

5 жыл бұрын

hotsnatch2003 the way I like it

shoulda built a honda

@hotsnatch2003

2 жыл бұрын

Gotta build what you have!

bad performance for the mods you have. in greece they make much better figures with better useful power range with the same mods.