1/87 micro RC / Brekina Porsche 956 - Completed video with making photos.
Ғылым және технология
1/87 micro RC / Brekina Porsche 956
It is finally completed.
The base vehicle this time is a 1/87 size Le Mans sports car.
This uses passeri RC kit.
Please refer to the manufacturer's link for details on the kit.
/ @passerirc
The basic parts are as follows.
Receiver DSM2, Servo 1.8g Micro Servo, LED 1005 Microchip LED, passeri RC chassis kit, Battery 80mAh Lipo.
By cutting many place, I was able to lower the vehicle height than the kit.
As a result, the space has narrowed, so the use of the LED board has been omitted, and only the receiver board and ESC board have been used.
Although I had a hard time loading weights, I installed as many weights as possible in a vacant small space to ensure grip.
However, as expected, the full throttle slips and cannot be controlled.
Please register and enjoy watching my videos.↓
kzread.info_RC_fa...
Thank you for watching!!
Пікірлер: 219
I had HO scale slot car racing set as kid. Simply amazing that it has progressed to a RC system with a servo no less.
Back when I was a kid we thought 1/25th scale slot cars were cool. Such an advancement is SO AMAZING!!!
@allios-5977
4 жыл бұрын
Ok boomer
@SPotter1973
4 жыл бұрын
YUP, I have three older brothers back in the 70's grandma got us a four lane Formula One track. I don't recall it ever being fully set up as such, for we lived in a small house.
If I'd had seen this back in the day surrounded by my Hot Wheel cars my head would have exploded! WELL DONE...so cool on so many levels
@QETVAN
4 жыл бұрын
Haha, for sure!
Looks new out the box, very impressive
The suspension test looks like he's petting it
I’m impressed you got working headlights and taillights too!
señor su trabajo es el tope de la modificación de autos a escala diecast , una verdadera obra de arte
@kasky_RC_factory
4 жыл бұрын
This is based on a 1/87 plastic model.☺️👍
Amazing!!! The possibilities for track design in minimal space is endless. Really cool.
@spcustombike3597
4 жыл бұрын
ๆ
Absolutely incredible!!! What a work of art .
@GpunktHartman
4 жыл бұрын
Stefan Bellof will loving it...☝️😉
@craigrichardson9560
4 жыл бұрын
How fast can that go?
Totally disappointed there is no rear suspension. Nah, just kidding, amazing build, and runs much faster than I expected.
@kasky_RC_factory
4 жыл бұрын
Rear suspension🥶🤣
4:58 i cant imagine that tiny car can be so cool like this
You do exceptional work thank you for sharing.
That's outstanding, I love it!!!! Great work!
You my friend are in need of a SLA 3d Printer (fine detail vs. PLA/ABS/Nylon 1.75 fed printers). You have the engineering talent. If you already know CAD then you have a head start , but if not check out FreeCAD, 2 days and you will be building Mark Webber's 919 body shell and chassis.
Beautifully done. Congratulations.
Looks so professional! Love it!
What a work ..!! This is just amazing ....!!!
That amazing...i would love to have something like that
@kasky_RC_factory
4 жыл бұрын
Thank you 😊👍
@claytondunlop248
4 жыл бұрын
@@kasky_RC_factory would u sell 1
@kasky_RC_factory
4 жыл бұрын
Sorry.
Amazing job ! Well done !
Now i understand why my friend got so mad. It's such high detail and such high quality. I stepped on his car and he went absolutely nuts, when i looked down i saw nothing more than plastic mess, apology wasn't enough so i decided to see what he was making such fuss about.. :/
@ishigamiyu1991
4 жыл бұрын
I feel sorry for your friend
@typicalstudent8854
4 жыл бұрын
If I was your friend I would no longer be your friend.
@frednel4326
4 жыл бұрын
Lmfaoo 😂😂😂
@frednel4326
4 жыл бұрын
Tell ur frnd he shuddnt let it lay round then lol..its so small and fragile a baby wud squish it hehe 😆
@RP944
3 жыл бұрын
You should buy your friend another one.
that's was so amazing, good work
Way too cool 💪💪💪💪 thanks for sharing
this is absolutly and totaly awesome!!!
@kasky_RC_factory
4 жыл бұрын
Thanks😊👍
Respect your work
Me encantaría saber más de escala 1/87 🏎️🕹️♥️ Buen video amigo Saludos desde Perú 🇵🇪👍🏻
Awesome job! I have built 12 HO RC vehicles. It's one thing to build a car like you did, but it's a real challenge to add the lights as you did. I am curious as to what steering servo you used, I haven't seen that one.
Dude, you're stressing me out, running it on the table top.....haha
Ma che meravigliaa !
Dang, I need a C8 version.
They should make races with little RC cars. That would be so much more interesting and would require more skill than those ridiculous ultra fast slot races.
@Trooper101st
4 жыл бұрын
+ TobiAnimados - Like this one here ...Ridiculous kzread.info/dash/bejne/eairzbSdZt2up8o.html
@benashlin8845
3 жыл бұрын
1/27 mini z racing has been around for a long time. they are roughly the size of a slot car.
Сама модель Порше классная!
It’s Awesome 💙
이야~!! 리스펙트합니다
Amazing....👍🏼👍🏼
Very very nice
@kasky_RC_factory
4 жыл бұрын
Thanks😆👍
This is so cool
Kazuo San! Soooooo cool!
@kasky_RC_factory
4 жыл бұрын
Thank you my friend😆👍👍👍
OMG! Micro Machines became real!
One more great video about your amazing builds. Also I’m glad I’m not the only one who thought about replacing default LiPo wires to something thinner and more flexible. Do you have any tips on handling this procedure? I was afraid to overheat the tiny battery during soldering of new wires.
@kasky_RC_factory
4 жыл бұрын
This time, I replaced the battery cable with a thin one that was removed from the servo. By melting the solder in a short time, it can be replaced without any problems. However, be aware that lipo batteries are dangerous.
Awesome such an artistic hand perfectly done. could you please tell me which receiver & servo module or light module you used ? also have done the micro excavator or mobile crane? could you please post the video of micro excavator in future thanks.
You are definitely gifted. I'm curious what you do for a living. It seems you got to have pretty steady hands to do detail that small almost like a jeweler or watchmaker but anyway thanks for sharing I'm into RC cars. I have a 5th scale 1/10 scale, I just recently bought a 125th scale Kyosho mini z. And I'm enjoying being able to use it around the house with this social distancing thing going on. But that one that you've built is just on another level keep up the good work.
@kasky_RC_factory
4 жыл бұрын
Thank you very much. I am very happy with your comment.🥰👍
How does it get power to the wheels? Its so cool good job.
a nail trim would help the micro rc aesthetically ;)
It's was really good but tire didn't grip so well. if it will fix that would be so nice RC in my view.
Awesome!
Omg this is the best Man.
Amazing!!!
AMAZING,,,,,,,,,,👍👍👍👍👍
How cute it is
Oooooooh hey✌🏻✌🏻instand Subscribed!!!! I also started the nano hobby😂 And loking for some detailed making those tiny cars... Hahaha... Coool!! Respectfull thumbs upp!!!! Salutations from swiss
Can you set a throttle curve? Looks and sounds like it want to bolt.
またまたビックリ(◎_◎;) このサイズで外観崩さずに作り込むのがスゴイ!
@kasky_RC_factory
4 жыл бұрын
ありがとうございます😆 かなり改造はしてますが、一応売られているキットを利用してますのでそれ程難しくはないんですよ〜👌
I fully understand and can see every component except the drive train, where's the little motor in this thing?
@ManicQuinn
3 жыл бұрын
Looks like it's encased under the 3d printed base, you can kind of see a silhouette of it when he showed it off
Good speed
Very Nice
@kasky_RC_factory
4 жыл бұрын
Thank you 😆👍
Did you get this from a scalextrics car? The older version not the new scale because I have that exact car in my collection so mabey I can make my own...
Amazing....I need one of those!!
@kasky_RC_factory
4 жыл бұрын
Thank you 😉 You can buy the kit from my friend. See the link in the comments section.
Great video! I have a 956 being shipped right now, I cant wait.
@kasky_RC_factory
4 жыл бұрын
Yes👍👍👍 This is a great kit. Please enjoy the production.
That's wonderful. I'm trying to RC a 1:87 Pescarolo C60 Judd '05 and a Ferrari FXX but they will never be as great as your porsche :(
@kasky_RC_factory
4 жыл бұрын
Thank you very much.😊 This Porsche uses a kit, so it's not really difficult. I'm looking forward to completing your work.
Wonder if it would be possible too make a like hotwheels van or similar that's a rather large 1:64th scale vehicle awd (No diffs, just gears leading too both sides + servo for steering & make it drift, no suspension too make it slightly more simple too do.)
@kasky_RC_factory
4 жыл бұрын
It is not difficult to convert a 1/64 size van into a RC with the small parts used for 1/87 RC. Please challenge yourself. However, the parts are a bit expensive.
@Mini-z1994
4 жыл бұрын
Well I'm not sure I'd manage too make it awd though too drift similar too say takara tomy drift package nano. Think I'll stick too my plan of perhaps getting a awd 1:28th scale chassis with 90mm wheelbase for my subaru impreza shelf queen body & a few other mini-z bodies i have towards summer 2020. Got a mini-z mr01 with a bad board atm. 27 mhz one from iwaver i think in it despite it being a kyosho mini-z lol. (Previous owner must have spilled something on it at some point as it's super glitchy after a small bit of range here in my apartment & in the basement so it just goes full speed suddenly after like 4 meters, despite resoldering the antenna wire & a few tries cleaning the board with chemically clean gasoline & changing crystals too 2 other sets i had it made no difference, even tried two other radios and nothing.)
im a new sub had tah shared liked loved this way cool man fun too
Who remembered hot weels like here
Need to play it on a right surface.
que legal!!!!!!!!!!!!!!!!!
Cool
Боже мой какая малышка 😍😍😍
@kasky_RC_factory
4 жыл бұрын
Спасибо😊👍
Aa dude loved it
OK, I wznt one. PLEASE add a link to purchase in the USA
this could run on a Hotwheels track so many possibilities with this size.
@kasky_RC_factory
4 жыл бұрын
Yes👍
@TestECull
4 жыл бұрын
Or a model railroad. 1/87 is HO scale, the single most common model railroad scale in the US, so there's tons of layouts where this car would feel right at home on provided it didn't get hung up at any point.
@kasky_RC_factory
4 жыл бұрын
I want a diorama to drive these cars.😆 But I don't have the skills to make it myself.😅
@TestECull
4 жыл бұрын
@@kasky_RC_factory Yes you do. Model railroad scenery is incredibly easy to create. Follow Everard Junction's myriad of videos and you'll be able to create a landscape these cars will look boss in. And the best part is that you can buy readymade accessories for it since the cars are in HO scale!
I think model cars 1/18 should come with RC.
Very nice,funny.
in relation to its weight, what would be the possibility of a good friction with a surface
@guerrillaradio9953
4 жыл бұрын
Definitely not easy, but what if you used a sheet of very thin rubber on the table. It's so small you can make your track rubber too for not much money. That would have to help. I want to see it wait at a rail crossing for a 1/87 train, then take off.
where do you know what to put and what you need?? are you a designer??
Great , friend
@kasky_RC_factory
4 жыл бұрын
Thanks👍
My kid wants one of this kind. Is it available for sales please.
Can you tell me what motor this kit has? Is it faster than the g55 kit? please respond, thanks!
@kasky_RC_factory
3 жыл бұрын
Maybe the motor is the same. But, the gear ratio is completely different.
Cute car...but It must be expenssive🤔😄👍
oh my!
Buying link?
amazing build.. its DSM?
@kasky_RC_factory
4 жыл бұрын
Yes! Use a Deltang board.
Tabletop LeMans series?🤔
대박 good
MEGA!!!!!
@kasky_RC_factory
4 жыл бұрын
Thank you for watching😊👍
How did you get that front metal parts for servo?
@kasky_RC_factory
4 жыл бұрын
You can buy kit from my friend. Please contact him. 👍 kzread.info/dron/eS6GwNrZcG6dSIJXMW84DQ.html
sounds like crying stewie in family guy 😂
What places did you get that micro race car because I really want one
lovely!!!, do you sell your rc cars?
@kasky_RC_factory
4 жыл бұрын
You can buy kit from my friend. Please contact him. 👍 kzread.info/dron/eS6GwNrZcG6dSIJXMW84DQ.html
Muito show cara
@kasky_RC_factory
4 жыл бұрын
Thanks👍
Where can I order Passeri RC Kit?
@kasky_RC_factory
4 жыл бұрын
Please ask him directly because it contains the producer's link.👍
wanna ask about how to make the small gear..
@kasky_RC_factory
4 жыл бұрын
The small gear are not my handmade.
Beutiful
whats the music name in first one
Can my pet cricket drive it lol 🦗🚘🏁
Did the cat get your tongue?
was this 3d printed? id like to make something similiar do you have the files
So beautiful and small I would also make one if I know how and where to buy the parts.. Can you help me?
@kasky_RC_factory
4 жыл бұрын
See video details and comments from others. I'm writing where to buy.👍
omg!
Come on man you will scare the shit out of a cockroach.. thumbs up
@kasky_RC_factory
4 жыл бұрын
👍👍👍
that is so cool if you sell em how much
*I'LL TAKE YOUR ENTIRE STOCK*