The best miata engine is the one you have.

@dracolich345

10 ай бұрын

🥰

@anke4739

9 ай бұрын

Mines blown up though 🥲

@dylancourville8708

8 ай бұрын

You will feel better one day…Once you replace that motor. Sorry for your loss.

@paulbfields8284

7 ай бұрын

Exactly right… love my 2 L

@kinanalhawat6753

Ай бұрын

​@@anke4739 a sign from god to put a V12 TDI in her

Personally, I prefer the 1.6 liter. I like the fun, free-revving character of the smaller engine, and it probably doesn’t hurt that they came in the lightest iteration of the Miata chassis. According to Spec Miata rules, the 1.6 crank is 26.5lbs. while the 1.8 crank is 35.6lbs. That’s proportionately a much larger increase in weight than displacement, and I suspect it has a lot to do with why the 1.6 seems so much happier to rev. Adding a lighter flywheel makes it even better. Ultimately, if more power were my primary focus, I probably wouldn’t be driving a Miata in the first place. Speed and power are just numbers to me. What I’m after is the sensation of speed, not so much speed itself.

@DwNecrid

Жыл бұрын

Installed a lightened 1.8 flywheel and clutch years ago when my 1.6 let go, best investment ive made. So happy to rev now, super fun. Only done the flywheel/clutch and coils, rest is stock. Absolute blast to rip around the back roads.

@markc4768

Жыл бұрын

I've got the same feeling about speed - if I want to go really fast in a big hurry, I've got a shifter kart capable of 0-60 in the mid 3s and can top out at 135-ish)... My stock 1.6 delivers a pure driving experience in spades and will get me out of far more trouble than it will ever get me into... You are right about reciprocating mass differences between stock 1.8 and 1.6 - A lightened steel flywheel and an NA clutch combo shaves off about 9 pounds and it makes for a rev-happy 1.8 - especially in a gutted NA. The 1.6 with a lightened flywheel loses about 6 pounds and can def feel the difference, but while it's great on the top end, loses a good bit of the grunt that the 1.8 with a light flywheel keeps by virtue of displacement and cam grind

@motomenace86

9 ай бұрын

​@@DwNecridI use the 1.6 flywheel clutch in the 1.8, makes it more awake

I've had my '93 for 30 years now, still a blast to drive. It's completely stock.

@FlyinMiataVideo

Жыл бұрын

Miata Is Always The Answer. ;)

@lilmike2710

Жыл бұрын

@captainmikek8695

Жыл бұрын

​@Lil Mike Welcome, I have a 91 as well. Love it too

@lilmike2710

Жыл бұрын

@@captainmikek8695 👍 I drive a big truck for a living and have been in the road for nearly 3 weeks now. I'm totally jonsing to get home and drive it. 😂 Mustang watching me washing it then driving it away:: **Hello darkness my old friend** Idfk... 😁 Tryin to make a meme in a comment section.

@teutonalex

Жыл бұрын

Me too. Had my 91 since 1998. Love it.

I have a 2000 NB1 1.8L with an m45. I'll say it's a blast to drive. Alot of people aim for HP number when in reality torque really needs to be considered. I love having that bottom end usable power.

I came across a deal on one last week (91 1.6) that I couldn't pass up. And I totally get the Miata thing now. I couldn't stop driving the thing. 👍

@FlyinMiataVideo

Жыл бұрын

Miata Is Always The Answer! ;)

Crazy this was uploaded the same day that I finished up the wiring for a 1.8 VVT swap into my '90 🤞🏻

I got a 1.6 with a light weight flywheel so getting to 6k rpm is easy and feels zippy I love it

@FlyinMiataVideo

3 ай бұрын

Those engines love to rev!

Another awesome video, I have a 1.6 and was considering the swap because I thought that I would be throwing good money out for bad to boost the 1.6 but I love the engine and the mechanical sounds it makes and I was thinking to sell it before watching the last video you posted about your new to you car and you told me to just drive it and have fun so thanks for talking me off the ledge both times !

@FlyinMiataVideo

Жыл бұрын

It all comes down to personal preference. The Miata is always going to be a fun car, so we definitely recommend just driving it as much as possible and enjoying it!

The great 1.6 vs 1.8 debate! This is always fun, although I have seen some forehead and neck veins during some more heated debates. I have owned 3 NA'S(in order) a '92, a '97 and,... wait for it...any guesses...(Jeopardy theme music)...almost there...a '91. All were stock. Like Keith was saying if you're building for power 1.8. If you're keeping it stock, 1.6. The 1.6 has a better character for the car, it loves to rev. The 1.8 on the other hand, kinda feels winded around 6k. I use to autocross the '92, I had no issues keeping up with the 1.8(including the VVT). The 1.6 pulls gleefully screaming until it runs into the limter. I'm proudly in camp 1.6. I now own an ND2. Guess my favorite engine in a Miata now.

The Boss man. So much knowledge. Thank you for sharing, Boss!

I'm building my 1.6 to be a rally car, driving it around in winter has been super fun, wasn't able to take it ice racing this year though. Difficult trying to balance how hard I try to keep the car clean and driving it around in all that salt though. Always felt like it sounds like a WRC car when buzzing the limiter, especially through tunnels. Definitely have more fun in those places than my 2015 STI, lmao.

incredible video with loads of awesome info thank you very muc. Last summer I got me a clean 1.6NB with 70k miles on the clock here in Finland and I LOVE every single drive with this beauty. I just love the high-revving little engine and it just keeps asking for more ... Can't wait to shoot some awesome videos and photos this year too. I wish there were more Miatas in Finland thought and more experts like you fellas.

@FlyinMiataVideo

3 ай бұрын

Thanks for watching and it's good to hear that you're enjoying your new to you Miata. We'd love to see some pictures of your drives!

I'd personally have to say I'd stick 1.8 BP engine myself. It has torque across the entire tachometer especially when you advance the ignition timing a couple degrees. It's one hell of an engine and runs forever stock. Strangely enough, the car I have is a 97 Kia sephia that came stock with the 1.8 be Mazda engine. Still original engine running and in pretty good shape with over 340,000 miles on it even though the rest of the car around it is falling apart and the wheels are falling off. I definitely haven't babied it either. Lots of power sliding, lots of burnouts, and bounced off that 7,500 rev limiter too many times to count. I kept it stock and naturally aspirated. Last time I changed the timing belt I inspected the camshaft lobes and still see the factory hatch pattern on all 16 valves. They still look new. I pushed it hard, but also change the oil regular with the Mobil 1 full synthetic high mileage 10-w40 oil. Only problems that engine ever had were harmonic balancer, leaking oil pan and and valve cover gaskets. Front and rear main seals still don't leak, and still doesn't burn a drop of oil. I'd personally stick to the BP 1.8 naturally aspirated for what I use it for as longevity is likely to be better. Little bit bigger engine doesn't have to work as hard to pull the car around.

Great presentation man! Covering a topic like this all in one take is not easy haha

About the engine redlines: JDM NBs (at least 1.8 VVT) have 7500 redline

I own an '02 NB VVT and a '91 NA6, and flat out, I think they're about as quick as each other in a straight line. However, the NA6 only comes alive after 4k rpm (I think my exhaust has actually created a hole in my torque curve below that), while the NB rides it's torque wave better. Both rev to around 7,200 rpm (I'm in South Africa, so we got the JDM spec NB2) and are fun in different ways. The NB is still my track darling, but the NA is a great experience to enjoy. Also, both run the same times at autocross.

@FlyinMiataVideo

Жыл бұрын

Mazda has done a good job at keeping the fun of the Miata over the years, but the original will always hold a special place in our hearts!

Thanks for the book recommendation, from you mentioning it to me paying for copies of both must have been less than a minute… 😂

I've owned a basically out of the box '91 (AC/PW/PB/ABS/LSD) ith 300k miles (108HP at last dyno/tune in 2021) for 21 years. It's an incredibly fun "slow car fast" - exactly as it was intended - only thing I've changed is reversible - a slightly fatter front sway bar to slow the roll rate, and an OE big brake swap. Does everything I want it to and has never "not driven me home under its own power...." As the former owner of an F/PROD MGB, a 62 Austin 1071 Mini Cooper S, a 63 XKE and a 65 TVR Griffith plus a bunch of various MGs, I truly love how it fits, and feels and responds. I recently drove a 130hp NA 1.6 and a stock 1.8 '96 (133 factory?) back to back, both built/tuned by the same guy who was selling/trading both - neither car was extensively modified - the 1.6 had coil overs but small stock brakes . As a daily driver, I would rather have that 1.8 - it had stock springs with adjustable shocks, headers and a free flowing exhaust - a much stronger launch when turning from a side road to main road with traffic approaching at 55-60 (with the AC on) - I didn't have to mat the throttle thru fourth gear to keep from being rear ended. But as a pure backroad twisties driver, the 1.6 was FAR more fun - lowered about an inch on high end coilovers, manual steering with much better feedback, a fat free flow exhaust (I suspect a gutted cat but didn't ask) and a sweeter howl from the engine around 6500-7000 than mine ever made. We couldn't come to an agreement on a price with or without a trade, so I'm still waiting for the phone to ring...

Love my 1.6l turbo Miata stock motor running 11psi for the last 4 years flawless

@FlyinMiataVideo

Жыл бұрын

Turbo makes everything better :)

Around when I first got my 91 back in 05, one of the parts guys at the dealership I worked at them, said there is a specific very early intake camshaft the top level racers put in the 1.6 for more power. He was a stock Miata class racer

@FlyinMiataVideo

Жыл бұрын

First we’ve heard of that rumor. Sounds like racer talk :)

My only experience is with my ‘99 1.8 and I can see how it has the low down torque that apparently seems lacking in the 1.6. And also how a 1.6 might want to rev more. But I suspect a lightweight flywheel really livens things up in any case, and it’s one of the modifications I look forward to most. Usable torque, in a more free spinning engine should be a blast.

NA 1.8 bottom end with ported NB2 head, Individual Throttle bodies running on Megasquirt ECU. I'd like to argue that's the best miata experience 😉

@Jeremy-kg1zr

Ай бұрын

What's the difference between the NA and NB bottom end?

@biggboysouth

Ай бұрын

@@Jeremy-kg1zr the NB2 bottom ends are better for a few reasons, higher flow oil pump and higher compression pistons from factory and stronger crank support. My original comment was just me being goofy wanting to share my build. I have an NA and found a good deal on a NB VVT head and swapped over to it. NB1 bottom end is essentially the same as an NA bottom end but it has slightly higher compression pistons.

I race in SCCA's STL (Super Touring Light) class, the 1.6 has a significant weight advantage per the rules. Besides, I already had a 1.6 SM that I converted over to STL so that is what I race.

@FlyinMiataVideo

Жыл бұрын

Both great reasons to choose 1.6!

HOWdy F-M, ... Thanks for the FACTS & COMPARISONS. 1993 "NA" 1.6 MIATA (automatic transmission) COOP the WiSeNhEiMeR from Richmond, INDIANA ...

I think this argument practically boils down to what you want to do with the car. I own a 1.6 and can attest to what was said in this video. There are specific cases where the 1.6 is better. It is lighter, happier to rev, and has the more traditionally sportier power band. Now this is strictly a stock vs stock comparison. If you ever plan on going down the road of ecu tuning the 1.8 is a superior platform to begin with for both NA and turbo setups. This is due to the many quality of life changes Mazda made to the 1.8 as the years went on by. You can save a lot of money, time and frustration. As an example the 1.8s came with OBD2, Knock sensors, throttle position sensors, VVT, MAF vs AFM, etc. (This is all year dependent so do your research!!!) If you never want to go down this route stick to the 1.6, the car is lighter and happier to drive. The extra power of the 1.8 is not as noticeable when you consider the extra weight of their chassis (yes they are still faster...). The ultimate miata is a combination of all of the NA and NB cars tailored to what you want from them so I wouldn't stress to much about it. There is no definitive answer. Tips for more power for the 1.6 gang: 1. Look into the 14° timing advance mod. Do your research and be responsible. Put better gas in to avoid pre detonation and be extra careful if you live in hotter climates. 2. The FC rx7 AFM box is a direct fit with the 1.6 one. It has a wider opening for air to flow through. This will give you a slight bump in power after 6000 rpm. No tuning required just an easy install.

@FlyinMiataVideo

Жыл бұрын

Good tips! In the end the choice all boils down to personal preference and how you use the car, but you'd be surprised how often we get asked!

My car is a 1992 1.8 swap. And so far I love it. But its also the only miata I've owned or driven. So I have no 1.6 experience. However the block out of my car came with it and I've been tempted to go back lol

@schakalicious6023

Жыл бұрын

A lighter flywheel and maybe some slightly more aggressive cams for the 1.8 is what i would do. Easier and cheaper than rebuilding and swapping the 1.6 and it’ll make it feel just as responsive. I have a 1990 that started as a 1.6, and now has an nb2 vvt motor. I also have a stock 97. So i have basically experienced every BP iteration. There is a slight difference in the responsiveness of 1.6 vs 1.8 but it’s not worth the effort of swapping. I think the difference is overstated Plus my neighbors like me better now that I have a bit of torque and don’t need to constantly be above 4000 rpm to make any power

The Yamaguchi books are terrific.

@FlyinMiataVideo

Жыл бұрын

A hidden gem a lot of people don't know about!

Really interesting stuff. Thnx. I wld be v keen to know what the original 1.6 factory cam valve timing settings were for Intake Opening/Closing and Exhaust Opening/Closing … wonder if u guys have that info??

Have had 1.6 Miata, 1.8 swaps, and blowers on both. After all these years, I'm driving a 1993 LE with a 1.6, because, yes, it is the better sports car experience. My wife has a 2019 ND RF GTS. Had the chance to drive Palmer in the cars back to back. With only a set of street/race tires, the LE was running similar lap times to the ND, even with the stock Bilstein suspension. The LE was a lot more fun, IMHO. With stick tires, and low power, the NA can be run flat out. With more power, and lots of body roll, you just have to drive it differently. One thing you didn't mention is longevity. In my experience, at about 150k, you start putting a little oil in the 1.8. I've had multiple 1.6 NAs sail past 200k, running like new. You got those noisey cam followers in the 1.6, don't recall that being a 1.8 issue. I never realised how different these two engines are, because it is so easy to swap them. Front engine stuff interchanges, and there are lots of material on doing the swap. Essentially, you enf up with a big engined 1.6, that the 1.6 electronics support. Great presentation, Keith! Still have my U.M.N. sticker from the '92 red that I crashed at Pocono during MMN.

@RideShootDrink

Жыл бұрын

Love my 93 NA6!

I had a 1993 1.6 and a 1996 1.8. that 1.6 was bolted together different man.

Going from a stock nb2 to a stock 90, the intention of the British roadster feel that the Miata was designed to try and reproduce but with reliability, are strong with the 90. Everytime I drive it, I feel like I’m in a low powered 60’s British roadster where the NB2 just felt like a normal American roadster.

@FlyinMiataVideo

5 ай бұрын

The early NA's certainly had a charm to them, that's for sure.

My '97 U.K spec 90 horsepower car is now a 1.8, thanks to your conversion kit...a big improvement, I have to say....

@chrisdooley1184

Жыл бұрын

Wow I bet that bump in horsepower and torque transforms the car just a bit. Cheers mate enjoy it

@st5rk

Жыл бұрын

​@@chrisdooley1184the EU 1.6 "90hp" isn't really 90hp, it's closer to 110hp stock. Swapping in regular 1.6 cams, an rx7 AFM and a lightweight flywheel bumped it up to 122hp for me. I have since added a speeduino so I could tune the ignition map and get rid of that AFM altogether and it feels even faster now, but I haven't been on the dyno yet to get a number.

@chrisdooley1184

Жыл бұрын

@@st5rk are those figures at the wheels or crank? Sounds like you’re doing all the right things especially getting rid of that AFM! You got a channel or instagram where I can see and follow your build?

@st5rk

Жыл бұрын

@@chrisdooley1184Crank. I'm in EU they measure at the crank for some reason. No channel or anything sorry. I'm baby stepping towards a turbo and getting all the supporting mods first and getting used to tuning the standalone on N/A for now

@alexismendoza1545

9 ай бұрын

@@st5rk 1.6s make around 95 to the wheels, 115 to the crank

I noticed he really didn't elaborate on the 1.6 long nose versus the 1.6 short nose that would have been nice to know because that was also a motor in between all of this that he can compare to the money and pass that might be interchangeable between the both one sixes

@FlyinMiataVideo

2 ай бұрын

Other than the nose of the crankshaft, there are no notable differences between the 1990-91 and 1991-93 1.6 engines. The only parts that are different are the crankshaft and the parts that interact directly with the nose - oil pump, crank seal, accessory pulley and timing belt pulley.

Too bad i couldn't catch the live show, but you mentioned it in the beginning a bit at @3:50. The mazda zl-ve is a 1.5l vvt engine based on the 1.6l miata block that looks a lot like the 1.8 vvt system. I know some forum posts have been made on the head swap to make a 1.6 vvt engine but I don't think anyone has completed one yet, I haven't checked in a bit. Have you guys tried playing with parts from different mazda cars to see what fits? Would that be a thing you guys would do in the, hopefully near, future? Could be cool/interesting to make the 1.6 more competitive / efficient.

@FlyinMiataVideo

Жыл бұрын

We don’t have any plans to explore parts bin upgrades for the 1.6, but we know there are some clever people working on it.

I have driven both an NA and a NB car (I own a1999) and I can only say that if you sidestep the clutch in the 1.8L at 3,000 RPM, it will do a pretty long burnout. Also, is there a safe comparison by saying you get more of a broader power band from a 383 ci SBC (350 block w/ 400 crank), even though the power band will start to drop off around 6500RPM?

I feel engine displacement has a lot to do with people talking about rpm powerband where I feel a very big part of is engine block deck height and rod to stroke ratio for example a standard honda b16 vs the b16 civic type r. type r engine had the same deck height and even longer rods than the standard b16.

@pontiacg445

10 ай бұрын

Fun fact, 1.6 and 1.8 miata have the same exact rods. The 1.8 is just stretched and bored. Mazda is not honda, so they kinda sucked at making engines. The 1.6 was already a bored 1.3, stolen from commuter cars.

I like the non vvti 1.6

Keith....Bit off topic but....Please do a piece on the blue "455" that is in the shop for the last while. This is of specific interest to me as my Miatas are all driven primarily on gravel or unmaintained gravel and dirt "roads", both in northern Canada and Mexico. Although I'm not an "offroad Miata" guy, so to speak, my cars do see tens of thousands of km off pavement every year so offroad/rally mods are of great interest to me. Keep up the great work!

@graham_lewis

Жыл бұрын

I believe that they have done a video covering that car in the past. should be in a playlist on their channel

@mitchellgast7272

Жыл бұрын

@@graham_lewis Thanks I'll dig around>

@FlyinMiataVideo

Жыл бұрын

Here you go! kzread.info/dash/bejne/hHegm9iOm5OplMY.html

@mitchellgast7272

Жыл бұрын

@@FlyinMiataVideo Thanks! Going through all the older videos now looking for all the tidbits I missed.

@flyin' Miata .. you guys better shut the comment section off on this video.. LOL ahaha

No matter what I think we can all agree roots style supercharged NA's trump all.👌🙃

1.8 with 1.6 flywheel, best of both worlds

I had a 97 with a stock engine and just about every bolt on. Was running late to help at the gates at an autocross, going flat out from every red light and a Hyundai Santa Fe decided to race me at the third red light. I got smoked at sub speed limit numbers. I did go on to beat a Factory 5 Cobra that day in competition (different classes). Miata’s are not fast. In modern times my voodoo2 2002SE isn’t fast, but it does go around roundabouts faster than traffic can handle, so I’m careful.

@FlyinMiataVideo

Жыл бұрын

Fun doesn't always have to be the fastest!

I have the 1989 1.6. I’ve never driven a 1.8. But it’s very tempting to mod these cars. Mine is bone stock. I’m trying not to spend $7k in it, but it’s a real struggle not to pull the trigger on a full Kraken build. I say whatever you have is the best one. It really doesn’t matter. Just learn your model and enjoy it.

@FlyinMiataVideo

10 ай бұрын

Any Miata Is Always The Answer ;)

Since your talking about all the different engines out there in the Miata which year engine do you think miata got it right as far as engine performance?

I'm a 1.6 guy and love to rev it but let's be honest, it's massively underpowered. It's now M62 supercharged and I've discovered a new car, still a great handling with now a lot of torque and power.

@Jeremy-kg1zr

Ай бұрын

Still having fun revving it out constantly while you drive it to work, around town, etc?

@dudu86240

Ай бұрын

@@Jeremy-kg1zr it’s now turbocharged, TD04 Kraken kit and it’s even better ! I can now hit the rev limiter in the fifth gear 😂 It’s very responsive and at 5000rpm the engine has another face, very funny 😁 I should upload soon a video I did on the Nordschleife three weeks ago.

Full bushing replacement video please 🙏

@FlyinMiataVideo

Жыл бұрын

We're shooting it right now!

Being driven a 1.6 and 1.8 back to back, the 1.8 definitely feels lazy and less 'responsive'. What I'm currently experimenting with my NA8, chuck on a NB6 flywheel and a Maxim works exhaust manifold, ARC intake Air box, the car feels more lively than before and I'm pretty happy with that. Next thing to tweak I might be looking at the camshafts. Do you have any recommendations if I'm about to retain the hydraulic lifters?

@fearofchicke

Жыл бұрын

I believe you can modify an exhaust cam and replace your intake cam with the modified exhaust cam. Hope that points you in the right direction.

We are all slow, but I bought a nb2 for a reason. Lol

So if the advantage of the 1.6 is a more sport car /lotus characteristic, is possible to give that characteristic to a 1.8 (well 1840) ? basically, quick the low end OEM 1.8 torque but get the easy raging reviness of the 1.6. My guess is higher lift cams and lighter weight flywheel. Other advantage of 1.6 is racing series limited to 1.6L (like old elan) or sportscar with 1.8 limit. 1840cc is not allowed in 1800cc races.

I like the 1.8 cause it's used in alot of platforms. Ford's Kia's use them. Plus can't beat cc's.

1.6 FMT FOR LIFE!

I have a Europe nb 1.6 with nitrous wet system direct port. I love my car because is not the most faster car in my drag catégorie "Et sportman", But !! She's regular and she's give me a smile when n2o kick. 1.6 it's simple and economy engine. Love miata .❤❤❤❤

@FlyinMiataVideo

Жыл бұрын

Smiles per mile are the best indication you have a good car!

@guiguitonicmotorsport

Жыл бұрын

@@FlyinMiataVideo ;-) yes of course .

NA with a nb2 is my take

When I bought mine, there wasn't an option other than the 1.6, and I have seen no reason to replace it.

Neither, I want a 13B-REW in my miata.

i think as long as it is MIATA then that is the answer to all questions lol peace and love to all keep it rad stay sfe and build on ... ps i drive a forged boosted 1.6 and love it but full standalone made a insane diff in the way the car acts to the tune but when u going to standalone that is usually a big commitment and step and not for most ppl just looking a lil fun ... n e ways to everyone just enjoy it as that is what mazda intended for the miata anyways , smiles per gallon over all

@FlyinMiataVideo

Жыл бұрын

That sounds like a fun ride! Miatas are fun out of the box, but are always the best when customized to fit their owners!

@mastercricket7626

Жыл бұрын

@@FlyinMiataVideo you are definitely right there yal and I love this lil thing its like a go cart for adults 😆 peace n love guys keep it rad stay safe and build on so u can keep supply the miata community with that juicy knowledge friends.. peace ✌

I WISH the ND came with the 1.5L. the 2.0L is an amazing engine but I don't ever feel the need to go above 6k on spirited drives and 3k on daily

@alexismendoza1545

9 ай бұрын

2.0 cuz mo powa baby

short nose 1.6 gang i find its a better car to mod the driver as you have to be in the revs more to make it handle correctly its a good bridge before getting more power but to be fair ive never properly driven the 1.8 hard so maybe thats the same i just imagine having to be more forcefull but at the same time more precise with the revs on the 1.6 probably just spouting bs tho

Would you attribute the rev'y'ness of the 1.6 primarily to rod:stroke ratio or head/cams? or what I'm really asking; with enough head work can a 1.8 feel like a 1.6?

@FlyinMiataVideo

Жыл бұрын

The rod ratio is likely a contributor, but cams are going to make the biggest difference.

Does FM have a video, or could it do a video on 5 speed vs 6 speed?

@VinceCannavaII

Жыл бұрын

Or typical swaps that could feel just as good as the stock units!

@RideShootDrink

Жыл бұрын

I'd love to know it too. I have a 6 speed, and have been itching to put it behind 1.6. My rationale behind it that low torque engine could benefit from a closer ratio transmission, and broader torqued engine say a turbo engine doesn't really need that many gears, except when the strength of a 6 speed is needed.

@JuanmaNuel-nb7nn

Жыл бұрын

Almost have then similar gears ratios ,just the dff gears ratio make the diferencies between both gearboxes

I remember looking into buying an Mx5. Everyone was saying to get the 1.8. I get the 1.8 and now everyone’s saying the 1.6 is better 🤨

@S0u11ess

Жыл бұрын

I've driven both, the 1.6 is slow and gutless. 1.6 guys are just trying to cope, making up nonsense

@whatfleshmeanstoskeleton

Жыл бұрын

@@S0u11ess it was something about torque and that the 1.6 is better for turbo

@lordthicknipples-gt2oq

10 ай бұрын

@@S0u11ess both engines are slow and gutless. The 1.8 isn't even that much better, the great thing about the 1.6 is that it has a lighter flywheel and is very rev happy. It just feels more responsive. Although, I am currently running a 1.8 engine in my '92 Miata. Was it worth the swap? Definitely. However, sometimes I miss that little 1.6. Too bad it exploded.

@pontiacg445

10 ай бұрын

@@whatfleshmeanstoskeleton Both engines have the same rods and both will fold under the same load. Another common fallacy spread about the internet. One isn't any better for turbo than the other, besides the 1.8 doing everything a little better than the 1.6.

I'll take a 6.2

What’s your opinion on the NB6 engine? A lot of the Japanese NB Miata’s I see on auctions are the 1.6 and I am curious to see how the newer 1.6 compares to the older NA6 motor

@FlyinMiataVideo

3 ай бұрын

We've never had any of the post-1993 1.6s in our shop, so we really can't provide much of an educated opinion.

Could you sell the NA and NB books on your website?

@FlyinMiataVideo

Жыл бұрын

They’re out of print, unfortunately. You’ll have to hunt down a second hand set. The NB version is a lot more common.

Does a newer 1.6 from overseas drop right in into my 1990 Miata if I had to replace the engine. You mentioned that there where updates to the engine overseas since the U.S. stopped using them in the Miata in 1993.

@graham_lewis

Жыл бұрын

The main thing as far as I know is the relocation of the cam angle sensor. in this video, you can see the 1999 1.8 has a sensor plug on the front left of the valve cover. earlier 1.8s did not have this. I believe overseas, the later 1.6 engines had the cam angle sensor on the front, removed it from the back, and its possible they may have also had a crank sensor. However I believe all you will need to modify is extending the cam angle sensor wiring to the front of the engine, and leave the crank sensor unplugged. Im not 100% sure, so dont take my word for any of this

Is the Mazda Miata 1.8 liter a flat plane crank engine?

MZR Is Always The Answer Including the 7200rpm question, btw. This boat has revs.

@FlyinMiataVideo

Жыл бұрын

We are actually big fans of the NC, just need to get more of them on our channel!

if you tune the pre throttle body intake tubing on 1.6 there is no lowend power loss but you might lose power on the topend.

@FlyinMiataVideo

5 ай бұрын

Most bolt-ons that offer more power in a certain RPM will loose some power in other area but the Skunk2 intake manifold might be the exception.

While the 1.8 does have a forged crank in my experience the 1.6 takes boost better as the stroke is shorter and dosent bend rods as easily

@FlyinMiataVideo

5 ай бұрын

For a street or dual purpose 1.8 car, we suggest forged rods and pistons once you get close to 300whp. The cranks are forged from the factory.

Just curious what kind of power does your 2.0L High Comp ITB engine make? And what is your opinion on it? Thanks

@FlyinMiataVideo

Жыл бұрын

The engine was up to about 178 rwhp and was enormous fun to drive with a nice spread of power and an 8000 rpm redline. Great engine. Unfortunately, most of the parts to build it have been unavailable for years - there were only 2-3 sets of the high compression stroker internals ever produced by FM. The market just wasn’t interested enough to pay the high price for a billet crank and associated bits at that power level. Almost all of the strokers were built for 400+ turbos.

is there a video of the non turbo 1.6 ITB?

@FlyinMiataVideo

Жыл бұрын

Not easily accessed. The car predates KZread and GoPros. There are some videos up at cheapsportscar.net that you can download.

What kind of gains can you see from changing the 1.6 from batch injection to sequential

@FlyinMiataVideo

Жыл бұрын

Mazda did that for California cars in 1993. It’s not really a performance increase, although the fact that you need an aftermarket ecu to make it work means you’ll get some power gains there.

Well, the company that sells turbo kits has been out of stock for 3 years or more now for NB so.....

@FlyinMiataVideo

Жыл бұрын

Working on it. It's hurting us more than it's hurting you! And we've definitely shipped a bunch out in the past 3 years while you weren't looking...

that's the exactly same story for s2000 lol

Any chance Keith that you go into the 148 rwhp 1.6 you built? Did the power move too far up to enjoy daily, or did you have a bunch of compression requiring fancy fuel? My car is an old school type build and the engine is next on the list. I have a good, low mileage 1.6 lnc engine from a wrecked car to replace my aging 1.6 snc, and want to do something to make it more special, without ruining drivability.

@FlyinMiataVideo

Жыл бұрын

Web Camshaft 505 cams, 11:1 compression, headwork, a custom header based off the “Boig” EP unit, one-off TWM throttles and a Link ECU. It ran on 91 octane and while you could daily drive it, it really preferred life above 4000 rpm. It likely made even more power - it had an 8000 rpm redline, but we never dynoed it past 7200 because that was the preset on our dyno setup and we were usually looking at other behaviors so we didn’t bother changing it. It did seem to outperform its rating when chasing other similar cars with more power. But the experience! Operatic.

@ericbonk2757

Жыл бұрын

​@@FlyinMiataVideoWhen you say you could daily drive it, but it preferred life above 4000 rpm, does that mean it had less than stock power and drivability below the 4000, then it woke up like VTEC, or did it have stock like characteristics below 4000, but came alive above? Thank you for giving many of the details in your reply above!

@FlyinMiataVideo

Жыл бұрын

@@ericbonk2757 It was built to rev, so it preferred life at 4000+. That's not a hard line, it basically just wanted to spin as fast as you would let it. Taking it into a traffic jam would be a waste, especially since it liked to idle a little faster than the usual 850 rpm. It probably never had less than stock power anywhere in the range. You certainly COULD daily drive it, but why spend that much money to build an amazing engine just to use it like a Corolla?

Can you make a 1.8 feel like a 1.6 through a lightweight flywheels and ecu tuning?

@FlyinMiataVideo

Жыл бұрын

A lighter flywheel certainly makes it feel sportier when free revving the engine, but it doesn't really change the fundamental character. ECU tuning is fairly limited on these - and since it can only tune ignition timing and fuel on a non-VVT 1.8, there are limits to what it can do as well.

What's the wheel and tyre specs on that NA just behind you?

@FlyinMiataVideo

Жыл бұрын

The blue NA is wearing our exclusive Kogeki 15x8 wheels in "deep silver" with 225/45 Toyo R888R tires.

I’ve heard of people using an exhaust cam on the intake valves when you turbo the 1.6. Does it help!

@FlyinMiataVideo

Жыл бұрын

We don't think there are enough gains to justify the hassle, but your mileage may vary.

I’ve a mk1 1.8 stock and the engines in good health thinking of finding a bit more power. What’s the best route to start a modern programmable ecu or just start by swapping out the cams and leave the factory ecu. Doing both looks to me as too much money. I’ve got a supercharger in the garage or do I just save up and do the lot supercharger cams and ecu etc?

@FlyinMiataVideo

Жыл бұрын

Forced induction is the only real path to more power on these engines. How much money you are willing to spend really dictates how much power you can get!

Keith - have you driven the ND 1.5L?

@FlyinMiataVideo

Жыл бұрын

Unfortunately not.

when do you think turbo systems will be back in stock? 1992 NA6

@FlyinMiataVideo

Жыл бұрын

As soon as possible. We are working on it.

Has anyone done a ND drive train in an NA?

@FlyinMiataVideo

2 ай бұрын

Not that we know, but it would be an interesting project. The electronics would be a challenge, you’re not going to control a direct injection engine with something like a Megasquirt 2.

What ever boosts your inner creep

@FlyinMiataVideo

Жыл бұрын

It really is just a matter of personal preference, but there are definite differences between the feel and experience of the two! :)

What can be done to improve top end performance on nd1 without a turbo ?

@FlyinMiataVideo

Жыл бұрын

BBR sells some cams that wake it up nicely. It feels very much like the ND2.

So what if you have a NA8 car and have a ton of 1.6l engines laying around? Would it make sense to go ahead and throw the 1.6l in that shell, or would you just find another 1.8 at that point?

@schakalicious6023

Жыл бұрын

The 1.8 nas are a few hundred lbs heavier. The diff is also geared slightly longer. I think it would feel really slow with a 1.6. A boosted 1.6 would definitely still be quick in an NA8 chassis however

NA6 is totally gutless. It doesn't "rev out better" you just have to rev it more to get the same result as the 1.8. I test drove all versions of the na/nb and the 1.6 was the only one that felt too underpowered to be fun

My JDM nb 1.8 6 speed revs to 7500 rpm from factory. However I know that this isn’t common

@FlyinMiataVideo

Жыл бұрын

We are a US-based company, so we don't have quite as much insight into what was done in Japan over the years. Thanks.

Newer Is usually bette guys goes for The engine and car

1.6 master race

I have an NA and have heard that the box and rear end can't handle turbo level power and am better off changing both for NB gear. Comments??

@FlyinMiataVideo

Ай бұрын

It really depends on how you drive it. For spirited driving with our Stage 1 Turbo kit, you shouldn't have an issue with the rest of your driveline. If you're tracking the car frequently, you'll probably need to swap the diff and maybe even the transmission at some point.

My 1.6 all original is cursed with rhat dreaded oil leak on the driver's side that weeps enough just to make things annoying.Its the head gasket but not internal just a corner port hole which goes bad and comes out thru the block.At only 48800 miles I still can't bring myself to crack open the motor to replace it as I read people with this common NA imotor issue have driven their cars like this for years and it never caused any problem except for very minor exterior oil weep that never gets worse and just live with it.I wonder if you encountered this peculiar problem and what your thoughts on resolving or living with it ...thanks .

@mroshfosh

Жыл бұрын

Cost me 1100$ to fix mine.. i hate leaks lol

@rubberducky6411

Жыл бұрын

@@mroshfosh hi did you just need a new head gasket to resolve it (most posts with this issue did just this) but read also having the head machined to mate proper surfacing which could possibly compromise sensitive component calibrations...

Both NB1 and NB2 JDM 1.8s have 7500 rpm redlines

I have a NB miata and my engine us blown so i want to know if the 1.6 can fit in the NB

@FlyinMiataVideo

10 ай бұрын

Anything is possible with enough time and money, but it's not a common swap, so finding parts/instructions is going to be tricky. Check Miata.net, or try giving our customer support team a call or email directly.

What could you explain and tell the differences between the long nose and short nose crank on miata?

@FlyinMiataVideo

Жыл бұрын

Good suggestion - we have some good example parts. We'll put that in the list for a future tech video.

@longbow1997

Жыл бұрын

@@FlyinMiataVideo could you also mention if there is anything to do to improve the short nose without swapping it? would be a lot cheaper / easier. Thanks in advance.

@FlyinMiataVideo

Жыл бұрын

@@longbow1997 Anything you can do to a long-nose 1.6, you can do to a short-nose 1.6 with a few exceptions like dampers and oil pump upgrades. That includes anything from intakes to headers to cams to forced induction. The 148 rwhp 1.6 that Keith had a few years back was a short-nose.

@lucasfrench1841

Жыл бұрын

ayo wassah joe

Intresting how politics affect emissions regulations. Toyota has brought back the 1L 3 cylinder. Curious how Mazda will respond, probably with a PHEV setup.

Flyin' Soldouta

@FlyinMiataVideo

Жыл бұрын

If there is something specific you're waiting for, give us a call. We've got tons of new parts on order and our CSR team will be more than happy to pass along any ETAs if we have them.

Is this difference between the 1.6 and 1.8 present for the nbs?

@FlyinMiataVideo

5 ай бұрын

We've never had our hands on a 1.6 NB, so we aren't too sure how they stack up.

I'm curious what do you think of the escort gt with the BP 1.8 I have a 91 and heard the only difference between the two motors is just the valve covers

Two questions regarding the 1.8 forged cranks: 1. About how much average torque can the stock forged crank hold before breaking? 2. Also, if one had a max goal of 250ft-lbs of torque to the wheels and still be reliable, would only forged connecting rods be needed? Or the pistons as well?

@aygwm

Жыл бұрын

I believe the 500hp Miata still has a stock crank. They’re very stout. You’ll break other things first

@FlyinMiataVideo

Жыл бұрын

Crank breakage just isn’t a thing. It’s far from the weak point. You can reach your torque goal reliably with stock internals.

Was it worth building an NA 1.6 or are you just throwing your money away for very little improvement? I enjoy the naturally aspirated feel but there isn't much headroom in the 1.6 by the sound of it.

@FlyinMiataVideo

Жыл бұрын

If you’re going to be doing a full build including cams, the 1.6 doesn’t have any specific magic to offer.