Man that's got to be one of the finest RC boats I've ever seen
@Livlifetaistdeth3 жыл бұрын
That might be the single greatest rc boat ever!
@junoypi Жыл бұрын
Without a doubt, the best rc boat ever I’ve seen. This is the ultimate.
@aerospacematt91472 жыл бұрын
Wow, powered by a turbine just like the full scale! That’s pretty awesome!
@GhostPepperDesigns8 жыл бұрын
I have now had it up to 127mph on a 1/6 mile oval course
@xswijnji
8 жыл бұрын
+Ghost Pepper Design is this Mr. Todd Fleury? Just curious, as I remember you/him discussing their turbine hydro on OSE, and I figured that this must indeed be the boat and thus the owner. I didnt realize the SPM5 can be tuned like that, it always seemed like from the overseas vids ive watched that they all seem to list their top speeds at around 80mph. Thats amazing! Also, I was curious what this hull is made of or manufactured by? I know you are fond of ML and have had some work done with Mike, but with this boat I was moreso curious in that I noticed the cockpit is permanently attached to the hull unlike all the wooden builds ive seen, and I had been wondering where you got your cowling too. Lastly, do you think you could recommend an electric motor that would be suitable for a 1/6 scale like this? I have a 1/6 scale hull being produced for me overseas currently and im planning to run a TP Power 5850/5670 to start out with, and I would like to stray from the expensive Lehner motors if possible.
@kennyhuskisson2684
6 жыл бұрын
Ghost Pepper Design OMG, that is just something to see!, awesome boat & job!
@zeeek14 жыл бұрын
Imagine 4 or 6 of these in a heat? Holy crap that would be fun to watch.
@ThomasDoubting54 жыл бұрын
That genuinely rapid by any standard of water craft. Sounds and looks awesome.
@DeadChan67 Жыл бұрын
Thing almost looks like it floats on the water. Built really well, a very stable little RC model that seems to be
@RandomAndrew3 жыл бұрын
Wow I love this... I wouldnt even know where to start when building this but I know I need to have one!
@michaelhrivnak1719
3 ай бұрын
You start by getting a second mortgage on your house!
@1970jaimee2 жыл бұрын
Without a doubt the most beautiful RC hydro; wow!
@ginopunsalan3 жыл бұрын
That boat is wicked. From the turbine sound and rooster tail. Nice!
@ThePocketMedic Жыл бұрын
Contender for the coolest RC vehicle ever.
@JeffWoodwickАй бұрын
That is a very cool RC boat.
@danstump36863 жыл бұрын
Damn that frikken thing is sick!
@homienat33742 жыл бұрын
No way ,nice machine there mate hope she is still around
@richardkautz29473 жыл бұрын
OMFG!! That is Wicked ! I haven't been much interested in RC boats, but Now ?! The Turbine sound and power to throw rooster tails like that is incredible ! 👍
@kiplindsay84134 жыл бұрын
Nice. Would love to see it on a larger body of water, for no other reason than to just watch the beauty of it on a plane
@hazriazeri3631 Жыл бұрын
Greds Nice fast rc bot used terbien terbo😊👍👍👍
@johnhopen8 ай бұрын
Camera man got me sea sick, but that is really cool!! Nicely done!
@macgyver51082 жыл бұрын
What a freakin MONSTER! That thing sounds amazing!
@user-nn3ye4hk4c9 ай бұрын
That’s rad…! I want one.
@glashoppah2 жыл бұрын
That is insane.
@dawnthe50316 жыл бұрын
I give it thumbs up for the speed and the flames
@MllrtimeOnTheTube3 жыл бұрын
Wow! Absolutely amazing!
@GhostPepperDesigns10 жыл бұрын
Geoffrey, I am running an x457/3 sharpened, balanced and detounged 90 degrees from the hub. But that is just my setup. You will have to find what works for you depending on your sea level height etc.
@TheRicsta
Жыл бұрын
Id would love to see the construction is it shaft or thrust drive
@kenfung6644 жыл бұрын
accelerates and corners like the real thing
@inactive679 жыл бұрын
If I ever had a spare 15K or so......but no matter thank you for sharing beautiful boat!
@MajTom-wd2yt
4 жыл бұрын
Thats what I paid for our first Allison GS.
@ringerdiggsycobbsy6254 Жыл бұрын
Wow amazing I'd love to buy one
@matthaug310411 ай бұрын
A whole nother level awesome
@shaunmiller93697 жыл бұрын
pretty f...ing awesome
@johnrobinson11402 жыл бұрын
Oh sweet Jesus! 😳
@geoffreyvanvugt817910 жыл бұрын
looks really good what prop are you running
@user-hu8fe6gp9g3 жыл бұрын
Офигеть крутая штука 👍
@alexmarshall43314 жыл бұрын
Impressive...almost decks awash til the power comes on👉💣👉⚡⚡
@jerrysmith71662 жыл бұрын
now that qas bad ass!
@mahesapemuda67503 жыл бұрын
Fantastic!
@pinoyDIY722 жыл бұрын
It’s awesome RC . Subscribes done Sir
@frankjrouseau85638 жыл бұрын
Holy shit how fast does that unit go ?
@dg80622 жыл бұрын
If I'm gonna spend that much on a toy, I wanna ride along too!
@dopplerfox2 жыл бұрын
Who designed this? The stability of it is just incredible.
@GhostPepperDesigns
2 жыл бұрын
It was hand built by Peter Mueller. The hull was built by a friend of his in Germany. Unfortunately, it was the last boat Peter built before he disappeared.
@scottbuck9348
2 жыл бұрын
Disappeared? That doesn’t sound good. Man I wish someone would find him cause he could make some serious cash if he built and or sold the plans! I have all electric and nitro rc boats but I’m seriously considering getting into the turbine side!
@heraldoboldrin10 жыл бұрын
Todd, where i can buy this Hull? i am looking a big hydroplane to use a lehner engine..
@jansvasta21464 жыл бұрын
Now thats how they should be driven!
@frisk151 Жыл бұрын
Which turbine are you running in it? Wren? Not a traditional rear exhaust... Nice work! I love how you are ripping the turns!
@inventions472 жыл бұрын
Love it 😀 bet ya nabours love ya 😆
@NASTXL9 жыл бұрын
Badass!! Just.....
@04swiftstang7 жыл бұрын
that thing is a pure beauty man....i love my bj29 v3, but turbine powered is on another level.
@GhostPepperDesigns
7 жыл бұрын
Thank you. I am now selling this item.
@natelevi779
5 жыл бұрын
Ghost Pepper Designs how much?
@laska9072 жыл бұрын
*The fish:* _they have arrived_ 👽👽👽👽
@mdss7976 Жыл бұрын
Excelente
@corndogfishing4516 жыл бұрын
Badass!!!!
@crazywaderacing46594 жыл бұрын
awesome! you need a bigger pond to turn it loose! lol
@bigwaveohs110 жыл бұрын
Hey Todd - This is awesome...too bad you're not still running at Campbell...LOL! If you have any build info, photos & etc. could you send it through Jim's email? I've always wanted to build one of these bad boys. Pete from the Campbell pond
@amirulhafiz72132 жыл бұрын
Wow Nice 👍
@winnipegperfectcircleflyin78595 ай бұрын
Beast
@roderickrayrutledge2740 Жыл бұрын
Damn that's pretty! 👍
@dondidykes66644 жыл бұрын
That sounds just like a jet fighter
@scottbuck93482 жыл бұрын
I know this was posted many years ago but is this beautiful machine up for sale! I’m a serious buyer and want more info if you would consider selling it! Thanks
@dondidykes66644 жыл бұрын
How fast is it??
@yoadrian27054 жыл бұрын
I want one!
@claudecousineau58112 жыл бұрын
Great boat, maybe propeller too close to transom, if boat wants to overturn, and skid fin a tidbit too deep in the water two mods that doesn’t take much work and worth the try otherwise 👍
@GhostPepperDesigns
2 жыл бұрын
Appreciate the feedback. But the strut and turn fin are exactly where they need to be in order to have this boat run at these speeds.
@miltechmoto3 жыл бұрын
What happens if the turbine goes in the water? Would it hyrdolock?
@chuckels431
3 жыл бұрын
Had a turbine on a float plane dunk on takeoff wide open.. it tried to suck the water in so fast it pulled the compressor blades out the front.
@jacobellw10 ай бұрын
Hi there great video! What engine is in this please? Thank you!
@GhostPepperDesigns
10 ай бұрын
Jetcat SMP5 with the MHZ gearbox.
@GhostPepperDesigns10 жыл бұрын
Bigwaveohs, Little fast to be running at Campbell or Fremont. I will for sure pass some info on through Jim.
@GhostPepperDesigns10 жыл бұрын
Heraldo, you can't purchase this hull. It was a custom hull. Look at what www.mlboatworksrc.com has to offer for a 1/6th scale.
@ricardorosales168
4 жыл бұрын
Gracias por la información. Tanks for the information this is going to be my new boat. Saludos from New York.✌🍎🗽
@LCMNUNES19622 жыл бұрын
👍👍👍 🇧🇷
@dshow16584 ай бұрын
Holly shit !!!
@homienat33742 жыл бұрын
🤙🤙🤙🤙🤙🤙🤙yes want 1
@jamessutherland7626 ай бұрын
How is the turbine mated to the prop?
@GhostPepperDesigns
6 ай бұрын
Gearbox built by MHZ
@UrbanAssaultJeep7 жыл бұрын
Where can I buy the hull kit or plans to build it? Does it cost $12-15k to build yourself or is that to buy from someone
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover the hull is custom built out of Germany. There really is no kit to build one. It will cost you 15k just to build one.
@UrbanAssaultJeep
7 жыл бұрын
Ghost Pepper Design who can I contact to have one built
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover I am not sure who builds them anymore. Peter Mueller who built my boat fell off the face of the earth. I have put my boat up for sale.
@UrbanAssaultJeep
7 жыл бұрын
Ghost Pepper Design how much and are pics posted anywhere?
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover I am selling for 10k. All you need to add is rx/rx. I have pictures of the boat on Facebook - Todd Fleury
@ronh15012 жыл бұрын
😳👍👍👍👍
@marthenamibrahim88802 жыл бұрын
Next time dont zoom camera....
@KK-ht2hs2 жыл бұрын
白鳥🦢？生きてるの？ 逃げないの？
@diytypeofguy65027 жыл бұрын
I thought u had to connect all kinds of crap to turbines to start them up? kerosene etc
@GhostPepperDesigns
7 жыл бұрын
Nope, this has remote start. The turbine starts up by using a lipo battery and a small motor
@diytypeofguy6502
7 жыл бұрын
Ghost Pepper Design cool ..that makes it more desirable
@robertliepe67662 жыл бұрын
💯👍👍👍🥂🍾😎🇺🇲
@PAKiller14 жыл бұрын
Why do RC hydroplanes always run clockwise, when the real ones always run counter clockwise??
@highatruthart
4 жыл бұрын
Turn fin is usually on the starboard side, & clockwise is just the direction they race.
@PAKiller1
4 жыл бұрын
@@highatruthart thank you, always wanted to know that
@chuckels431
3 жыл бұрын
It more has to do with the prop rotation , don’t know about full scale but rc models all have engines / props that rotate left hand looking at the rear., most don’t like to make left turns they have a bad hopping tendency.
@baimaireaung78064 жыл бұрын
space ship
@hotdog82145 жыл бұрын
What are you scared about😂.. it's in the water..scared is when you maiden a 15k model jet .. Talk about pucker factor
@GhostPepperDesigns10 жыл бұрын
@ernestdyer9401
3 жыл бұрын
Can you buy one of those things?
@hswing1118 күн бұрын
We that was a huge bunch of nothing.
@GhostPepperDesigns
18 күн бұрын
I'm still determining where you are going with that, so thank you for taking the time to type something. Next time, please think about what you are typing. Thank you, Joe Biden, for your useless comment.
Пікірлер: 109
Man that's got to be one of the finest RC boats I've ever seen
That might be the single greatest rc boat ever!
Without a doubt, the best rc boat ever I’ve seen. This is the ultimate.
Wow, powered by a turbine just like the full scale! That’s pretty awesome!
I have now had it up to 127mph on a 1/6 mile oval course
@xswijnji
8 жыл бұрын
+Ghost Pepper Design is this Mr. Todd Fleury? Just curious, as I remember you/him discussing their turbine hydro on OSE, and I figured that this must indeed be the boat and thus the owner. I didnt realize the SPM5 can be tuned like that, it always seemed like from the overseas vids ive watched that they all seem to list their top speeds at around 80mph. Thats amazing! Also, I was curious what this hull is made of or manufactured by? I know you are fond of ML and have had some work done with Mike, but with this boat I was moreso curious in that I noticed the cockpit is permanently attached to the hull unlike all the wooden builds ive seen, and I had been wondering where you got your cowling too. Lastly, do you think you could recommend an electric motor that would be suitable for a 1/6 scale like this? I have a 1/6 scale hull being produced for me overseas currently and im planning to run a TP Power 5850/5670 to start out with, and I would like to stray from the expensive Lehner motors if possible.
@kennyhuskisson2684
6 жыл бұрын
Ghost Pepper Design OMG, that is just something to see!, awesome boat & job!
Imagine 4 or 6 of these in a heat? Holy crap that would be fun to watch.
That genuinely rapid by any standard of water craft. Sounds and looks awesome.
Thing almost looks like it floats on the water. Built really well, a very stable little RC model that seems to be
Wow I love this... I wouldnt even know where to start when building this but I know I need to have one!
@michaelhrivnak1719
3 ай бұрын
You start by getting a second mortgage on your house!
Without a doubt the most beautiful RC hydro; wow!
That boat is wicked. From the turbine sound and rooster tail. Nice!
Contender for the coolest RC vehicle ever.
That is a very cool RC boat.
Damn that frikken thing is sick!
No way ,nice machine there mate hope she is still around
OMFG!! That is Wicked ! I haven't been much interested in RC boats, but Now ?! The Turbine sound and power to throw rooster tails like that is incredible ! 👍
Nice. Would love to see it on a larger body of water, for no other reason than to just watch the beauty of it on a plane
Greds Nice fast rc bot used terbien terbo😊👍👍👍
Camera man got me sea sick, but that is really cool!! Nicely done!
What a freakin MONSTER! That thing sounds amazing!
That’s rad…! I want one.
That is insane.
I give it thumbs up for the speed and the flames
Wow! Absolutely amazing!
Geoffrey, I am running an x457/3 sharpened, balanced and detounged 90 degrees from the hub. But that is just my setup. You will have to find what works for you depending on your sea level height etc.
@TheRicsta
Жыл бұрын
Id would love to see the construction is it shaft or thrust drive
accelerates and corners like the real thing
If I ever had a spare 15K or so......but no matter thank you for sharing beautiful boat!
@MajTom-wd2yt
4 жыл бұрын
Thats what I paid for our first Allison GS.
Wow amazing I'd love to buy one
A whole nother level awesome
pretty f...ing awesome
Oh sweet Jesus! 😳
looks really good what prop are you running
Офигеть крутая штука 👍
Impressive...almost decks awash til the power comes on👉💣👉⚡⚡
now that qas bad ass!
Fantastic!
It’s awesome RC . Subscribes done Sir
Holy shit how fast does that unit go ?
If I'm gonna spend that much on a toy, I wanna ride along too!
Who designed this? The stability of it is just incredible.
@GhostPepperDesigns
2 жыл бұрын
It was hand built by Peter Mueller. The hull was built by a friend of his in Germany. Unfortunately, it was the last boat Peter built before he disappeared.
@scottbuck9348
2 жыл бұрын
Disappeared? That doesn’t sound good. Man I wish someone would find him cause he could make some serious cash if he built and or sold the plans! I have all electric and nitro rc boats but I’m seriously considering getting into the turbine side!
Todd, where i can buy this Hull? i am looking a big hydroplane to use a lehner engine..
Now thats how they should be driven!
Which turbine are you running in it? Wren? Not a traditional rear exhaust... Nice work! I love how you are ripping the turns!
Love it 😀 bet ya nabours love ya 😆
Badass!! Just.....
that thing is a pure beauty man....i love my bj29 v3, but turbine powered is on another level.
@GhostPepperDesigns
7 жыл бұрын
Thank you. I am now selling this item.
@natelevi779
5 жыл бұрын
Ghost Pepper Designs how much?
*The fish:* _they have arrived_ 👽👽👽👽
Excelente
Badass!!!!
awesome! you need a bigger pond to turn it loose! lol
Hey Todd - This is awesome...too bad you're not still running at Campbell...LOL! If you have any build info, photos & etc. could you send it through Jim's email? I've always wanted to build one of these bad boys. Pete from the Campbell pond
Wow Nice 👍
Beast
Damn that's pretty! 👍
That sounds just like a jet fighter
I know this was posted many years ago but is this beautiful machine up for sale! I’m a serious buyer and want more info if you would consider selling it! Thanks
How fast is it??
I want one!
Great boat, maybe propeller too close to transom, if boat wants to overturn, and skid fin a tidbit too deep in the water two mods that doesn’t take much work and worth the try otherwise 👍
@GhostPepperDesigns
2 жыл бұрын
Appreciate the feedback. But the strut and turn fin are exactly where they need to be in order to have this boat run at these speeds.
What happens if the turbine goes in the water? Would it hyrdolock?
@chuckels431
3 жыл бұрын
Had a turbine on a float plane dunk on takeoff wide open.. it tried to suck the water in so fast it pulled the compressor blades out the front.
Hi there great video! What engine is in this please? Thank you!
@GhostPepperDesigns
10 ай бұрын
Jetcat SMP5 with the MHZ gearbox.
Bigwaveohs, Little fast to be running at Campbell or Fremont. I will for sure pass some info on through Jim.
Heraldo, you can't purchase this hull. It was a custom hull. Look at what www.mlboatworksrc.com has to offer for a 1/6th scale.
@ricardorosales168
4 жыл бұрын
Gracias por la información. Tanks for the information this is going to be my new boat. Saludos from New York.✌🍎🗽
👍👍👍 🇧🇷
Holly shit !!!
🤙🤙🤙🤙🤙🤙🤙yes want 1
How is the turbine mated to the prop?
@GhostPepperDesigns
6 ай бұрын
Gearbox built by MHZ
Where can I buy the hull kit or plans to build it? Does it cost $12-15k to build yourself or is that to buy from someone
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover the hull is custom built out of Germany. There really is no kit to build one. It will cost you 15k just to build one.
@UrbanAssaultJeep
7 жыл бұрын
Ghost Pepper Design who can I contact to have one built
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover I am not sure who builds them anymore. Peter Mueller who built my boat fell off the face of the earth. I have put my boat up for sale.
@UrbanAssaultJeep
7 жыл бұрын
Ghost Pepper Design how much and are pics posted anywhere?
@GhostPepperDesigns
7 жыл бұрын
Brandon Hanover I am selling for 10k. All you need to add is rx/rx. I have pictures of the boat on Facebook - Todd Fleury
😳👍👍👍👍
Next time dont zoom camera....
白鳥🦢？生きてるの？ 逃げないの？
I thought u had to connect all kinds of crap to turbines to start them up? kerosene etc
@GhostPepperDesigns
7 жыл бұрын
Nope, this has remote start. The turbine starts up by using a lipo battery and a small motor
@diytypeofguy6502
7 жыл бұрын
Ghost Pepper Design cool ..that makes it more desirable
💯👍👍👍🥂🍾😎🇺🇲
Why do RC hydroplanes always run clockwise, when the real ones always run counter clockwise??
@highatruthart
4 жыл бұрын
Turn fin is usually on the starboard side, & clockwise is just the direction they race.
@PAKiller1
4 жыл бұрын
@@highatruthart thank you, always wanted to know that
@chuckels431
3 жыл бұрын
It more has to do with the prop rotation , don’t know about full scale but rc models all have engines / props that rotate left hand looking at the rear., most don’t like to make left turns they have a bad hopping tendency.
space ship
What are you scared about😂.. it's in the water..scared is when you maiden a 15k model jet .. Talk about pucker factor
@ernestdyer9401
3 жыл бұрын
Can you buy one of those things?
We that was a huge bunch of nothing.
@GhostPepperDesigns
18 күн бұрын
I'm still determining where you are going with that, so thank you for taking the time to type something. Next time, please think about what you are typing. Thank you, Joe Biden, for your useless comment.
Wtf