EXCELLENT! up to 10:00. You are the only person I have seen on KZread that shows chipping on German armor did not go to the bare metal (unless of an impact). I was a volunteer at the Patton Museum ( back when we had tanks). We had 2 that still had original paint. The red lead primer did not scuff off. The only rust on the tank we had PZ4 -F or G. Was the track. Because the track were not painted. All of the Aberdeen Tanks were painted the same color. What ever was on sale the day they got the paint. The chipping you see is 60+ years of crap post war paint, not original paint.

Great modelling and painting, your talent for detailing is impressive!

@scalemodelresearch

Жыл бұрын

Thank you very much. I am glad for your comment.

well done👍. Unfortunately, an error has crept in. The Brummbär had steel wheels on the front and back pair. Because these rubber rollers were subject to severe wear and tear during operation due to the additional weight. Because the chassis was never designed for this weight. Later, some tanks were even equipped with steel rollers. But if ones with rubber were used then only the two middle and the front and rear pairs of rollers were with steel rollers

The crew painting is just WOW

@scalemodelresearch

Жыл бұрын

thank you🙌

Excellent! I like how you toned the weathering down a little bit on this one. It looks really great. The extra details are also very nice.

@scalemodelresearch

Жыл бұрын

Thank you very much. I'm glad!

It’s very nice work, paint mix ratio is very useful! 😊

@scalemodelresearch

Жыл бұрын

Thank you very much！

Fact check: The name of the vehicle is "Brummbär", German for "growling bear". Some people decades ago would type "Bär" as "Baer" for the difficulty to represent the Umlaut. (Also, in German, one capitalises all nouns.) The suffix "-bar" is the German equivalent of "-able" or "-ible"; for example, "hilfbar" is German for "helpful". One of the most intriguing and enjoyable aspects of modelling that I have learnt is accuracy, militarily (e.g., distinguishing between unit designations, camouflage schemes, etc.), historically (e.g., would not see an M-26 Pershing U.S. Army Heavy Tank in the Italian Theatre in 1943 because that vehicle had yet to enter operational service), materially (steel objects can rust over time, whilst aluminium things do not), and the like.

@scalemodelresearch

Жыл бұрын

Thanks for letting me know. I enjoy plastic models, I don't want to build real tanks. So don't worry about the details, that's my kind of modeling. Thanks for your comment.

BRUMMBAR 待っていた。 最高です 수고하셨습니다

@scalemodelresearch

Жыл бұрын

ありがとうございます！いつもコメント頂き感謝です🙌

I have watched this video about 10 Times now! Just an Awesome Build!!!

@scalemodelresearch

Жыл бұрын

I'm too happy! I'll keep trying to do better and better modeling!

Excellent work!

@scalemodelresearch

Жыл бұрын

thank you🙌👍

Great job! this video is text for me making brumbar

@scalemodelresearch

Жыл бұрын

thank you😆‼️🙌

Fantastic work and video like always! Great detail and weathering! Would love to see a walk through your bench and wonderful collection one day 😉

@scalemodelresearch

Жыл бұрын

Thanks again for watching 😊

You're truly an artist, great work two tumps up.

@scalemodelresearch

Жыл бұрын

Thank you! I'm glad you commented!

Fantastic Modell 👍👏👏👏

@scalemodelresearch

Жыл бұрын

thank you🙌👌

Awesome work!👍

@scalemodelresearch

Жыл бұрын

thank you🙌👍

Very nice,and great attention to detail. One of my favorite kraut rides as well.

@scalemodelresearch

11 ай бұрын

thank you‼️🙌👍

It looks like Steptoe and Son made a tank

Wow . That's really good welldone 👍 love it

@scalemodelresearch

Жыл бұрын

thank you🙌👍

Love your videos your work is amazing 👏

@scalemodelresearch

Жыл бұрын

Thanks for the comment! I'm glad to hear it. I'll do my best to make a better video.

I watch all your videos - you are an exellent builder and painter.

@scalemodelresearch

Жыл бұрын

Thanks again for watching 😊

Outstanding! One to be proud of my friend

@scalemodelresearch

Жыл бұрын

thank you🙌👍

Really very nice job with everything.

@scalemodelresearch

Жыл бұрын

Thank you very much. I am always happy to hear your comments.

You Sir, are a master!

@scalemodelresearch

Жыл бұрын

thank you🙌👍

thats amazing! :D

@scalemodelresearch

Жыл бұрын

thank you🙌

Great job well done.

@scalemodelresearch

Жыл бұрын

thank you😃🙌

Very very good.Wonderful👏👏👏

@scalemodelresearch

Жыл бұрын

thank you‼️🙌

bravo!

Amazing work !🏆🏅🎩👌🏻🤝🏻

@scalemodelresearch

Жыл бұрын

Thank you very much!

Nice idea, great masterpeace 👍😃

@scalemodelresearch

Жыл бұрын

Thank you very much. I am glad for your comment.

Magnifique travail 👍

@scalemodelresearch

Жыл бұрын

Merci !

Another stunning model. Thanks for sharing pal. (I truly like second background song also :)) ) Have a good modelling.

@scalemodelresearch

Жыл бұрын

Thank you! I'm glad you commented. Have a great weekend!

Awesome!👍

@scalemodelresearch

Жыл бұрын

Thank you!!

Wow!

@scalemodelresearch

Жыл бұрын

Thank you!

great work :)

@scalemodelresearch

Жыл бұрын

Thank you very much！

Wow what a job. You truly are inspiring to me with my models. Ty and, your music reminds me of a Charlie Brown cartoon. Lol

@scalemodelresearch

Жыл бұрын

Thanks! The background music is a trial and error process. LOL!

Great job.... I watched with the sound off though 😉

@scalemodelresearch

Жыл бұрын

Thanks! The background music is a trial and error process. Please watch the next one.

Great vid mate, thanks for uploading. But dear gawd the music! lol

@scalemodelresearch

Жыл бұрын

Thank you! The music might be like this for a while lol but watch the next one.

Fantastique

@scalemodelresearch

Жыл бұрын

Thank you!

Really interesting music

@scalemodelresearch

Жыл бұрын

Thank you !!

お疲れ様でした。完成しましたね。見るだけで、だんだん言葉を失っていきます（笑）。フィギュアの塗装編、参考になります。

@scalemodelresearch

Жыл бұрын

ありがとうございます。ちゃんとしたフィギュア塗装動画つくりたいんですけどねぇ。視聴率悪いからなぁ(笑) いっそフィギュア塗装のサブチャンネル作るかな。

@panzer-meister

Жыл бұрын

@@scalemodelresearch あははは、確かに。You Tubeって、ホント数字が気になりますよね。 私の動画も、大砲は人気ないですね・・・って、作家は金（ゼニ）のこと考えちゃいけませんぜ（笑）。

@scalemodelresearch

Жыл бұрын

いや　そうなんですけど気になりますよ　笑 やっぱりドイツ戦車作ってりゃいいのか？赤い悪魔のシャーマンやりたいけど今悩んでます　笑

You get a lot of questions regarding the airbrush, pressure, thinner, etc because it is remarkable that you can shoot such thin lines and control overspray, as you did with the camo patterns in this vid. I have a high end airbrush with a .15 nozzle and I have not been able to make it work magic as you have. If you have the time, more detail on your airbrush setup, paint thinning and and in general how you work the airbrush would be helpful.

@scalemodelresearch

Жыл бұрын

Thank you for your comment. My airbrush is a Tamiya Spraywork REVO, a model that is over 20 years old. Of course the air pressure is not adjustable. The hand piece is also a cheap Tamiya model with a 0.3mm nozzle. In order to draw fine lines, I dilute the paint anyway, but the dilution rate varies depending on the type of paint, and is also affected by temperature and other factors, so I can't give a general answer. You will know your setup after practicing many times. Good luck!

@MiguelAngelLopezSalazar

Жыл бұрын

I am a professional in the fine arts and a model kit enthusiast. I add drying retardant to any acrylic paint mixture. I have tried them all. In the end the best one is: Retarder medium from Vallejo. ref 73.597(it's thick like a gel). Proportions for nozzle 0,15= 7 drops of medium(water, thinner...)+1 or 2 drops of colour+ 1 drop of Retarder (I put a small ball on a brush) Do not mix in the airbrush cup. It works with my Iwata and Harder. Tested with paints and inks: Schmincke aerocolor, Model colour, Premium Vallejo, Model Air Vallejo, Molotow, Liquitex, Rohrer, Acrylic gouache, normal gouache and Talens ink. Everything works with this mixture. Lines as fine as pencil. Pressure: 1BAR Translated with www.DeepL.com/Translator (free version) Translated with www.DeepL.com/Translator (free version) Translated with www.DeepL.com/Translator (free version)

This is a masterpiece! What pressure do you use when applying the camo with the thin lines?

@scalemodelresearch

Жыл бұрын

Thank you! I'm so happy! My airbrush is a cheap one with non-adjustable air pressure. So I don't know what the pressure is. Please keep watching.

Phenomenal talent. And the cat walking on the keyboard too. Is there a video of IT?

@scalemodelresearch

Жыл бұрын

Thank you very much. I'm glad!

A masterpiece! Anyway, how do you determine the composition and percentage of the mixed colors (e.g., for the camouflage)? Do you follow a known standard, or do you make an experiment of mixing colors beforehand based on some related photos or documents related to the war machine being modeled?

@scalemodelresearch

Жыл бұрын

Thank you! I'm glad you commented. The color mixing is appropriate. I mix colors as I go, and I don't look at any materials. Because it is a plastic model. It is correct to make it as you like.

Excellent modelling skills. Can I ask what you made the tarps out of ?

@scalemodelresearch

Жыл бұрын

For the tarp, I used a water-based bond that I dissolved in water and applied to tissue paper. Thanks for your comments. Have a great weekend!

Excellent job mate, if may ask with what you thinning your colours and what is the size of the nozzle u using??

@scalemodelresearch

Жыл бұрын

Thank you very much.　The nozzle is 0.3mm.

いつも楽しく拝見してます😮 コンプレッサーは何を使われてるんですか?

@scalemodelresearch

Жыл бұрын

ありがとうございます！めっちゃ嬉しいです！エアブラシはタミヤの古いモデルで、スプレーワークREVOというやつです。

素晴らしいです！フィギュアの顔に粘土みたいなものをマスキングされていましたが、何を使っておられるのでしょうか。

@scalemodelresearch

Жыл бұрын

ありがとうございます🙌マスキングはいわゆるポスターガムというやつです。検索したらいろいろ出てきますよ。貼ったり剥がしたりを繰り返し使えるので便利です😊

@user-nx9cy7fl6j

Жыл бұрын

ありがとうございます！検索してみます！マスキングテープでの作業から解放できそうです。

I don’t suppose you could come to the states and teach me to paint better could ya? Lol

@scalemodelresearch

Жыл бұрын

Ha ha! Nice, nice! I'd love to travel to the US, so if I ever make it there, I'll let you know! LOL Thanks!

what type of brushes did you use for the face would love to try them

@scalemodelresearch

Жыл бұрын

Thanks for the comment! I use Tamiya modeling brushes.

@paulbryson1692

Жыл бұрын

@@scalemodelresearch advies can i order them in uk

Hello Can you tell me the brand and the reference of the side metal shooting hatches Awaiting your reply Thanks Cordially

@scalemodelresearch

Жыл бұрын

Thanks for your comment. The metal parts used in this video are from a Japanese manufacturer called Passion Models. Have a nice weekend!

Mr. Silicone Barrier, is this for chipping ???

@scalemodelresearch

Жыл бұрын

Thank you. That is correct. It is for chipping.

I subscribed so pls do a voice reaval

Hello , what are the colors for the green highlighting? 😄

@scalemodelresearch

Жыл бұрын

Hello! Thanks for your comment! The green highlights are a mixture of the original color and a buff, or yellowish color such as fresh.

@gustavodealba2459

Жыл бұрын

@@scalemodelresearch well i thank you for the information, and by the way,,, maybe i should have mentioned at the begining of this chat,,,, i really enjoy and like your painting process , very simple yet with results above the average,,, my opinion,,, and again thank you for the feedback

10:18 whatis name of this paint?

大师

ちーす

@scalemodelresearch

Жыл бұрын

ちーす！🙌

Could leave the music out. Annoying.

Not helpful

I can't wait for all the dioramas from the Ukraine war - T72s with washing machines and toilets strapped on the back.

@scalemodelresearch

Жыл бұрын

That's cool. I want to build a Ukrainian T72 someday. Thanks for the comment!