how did u get em off,,, lefty loose or righty position. mine are line completely stuck on. 2.4l 2014 journey se
@the-review-channel
Ай бұрын
Ì have oxyfen sensor nut first undo cable then put o2 nut on with cable out the slit pput ratchet on one hand hold it on straight other hand give handle light whacks and increase till you hear a crack the crack is vacuum seal hraking then ratchet it off easy put vadalune on new threads ratchet in snug dont overtighten
@sirokoolss7 ай бұрын
2015 Journey Crosstoad 2.4 So I had a mechanic replaced my cat recently and ever since then I’ve had three check engine codes pop up p0420, p0133 & p113d. I’m thinking he cross connected the oxygen sensors. I just can’t find a diaphragm that shows how they really go online. The upstream sensor is connected to the bottom connector and the downstream sensor is connected to the top connector. Can somebody look at their 2.4 journey and verify for me please, Thank you.
@the-review-channel
Күн бұрын
Cjeck to see if the rigjt sensors were put on.. upstrem downstre got mixed up both look the same , try gettin 2 cans of seafoam and add it to gas tank just begore you put gad in put on high octane gas if it runs better then it is clogged lines injectors or cats. Try that first its cheap and see where improvememt is noticed and go from there. Yhis should help clean dirt and carbon build up. Good luck
Пікірлер: 6
Thanks bro
@the-review-channel
Жыл бұрын
Welcome
how did u get em off,,, lefty loose or righty position. mine are line completely stuck on. 2.4l 2014 journey se
@the-review-channel
Ай бұрын
Ì have oxyfen sensor nut first undo cable then put o2 nut on with cable out the slit pput ratchet on one hand hold it on straight other hand give handle light whacks and increase till you hear a crack the crack is vacuum seal hraking then ratchet it off easy put vadalune on new threads ratchet in snug dont overtighten
2015 Journey Crosstoad 2.4 So I had a mechanic replaced my cat recently and ever since then I’ve had three check engine codes pop up p0420, p0133 & p113d. I’m thinking he cross connected the oxygen sensors. I just can’t find a diaphragm that shows how they really go online. The upstream sensor is connected to the bottom connector and the downstream sensor is connected to the top connector. Can somebody look at their 2.4 journey and verify for me please, Thank you.
@the-review-channel
Күн бұрын
Cjeck to see if the rigjt sensors were put on.. upstrem downstre got mixed up both look the same , try gettin 2 cans of seafoam and add it to gas tank just begore you put gad in put on high octane gas if it runs better then it is clogged lines injectors or cats. Try that first its cheap and see where improvememt is noticed and go from there. Yhis should help clean dirt and carbon build up. Good luck