00778 - Steering Angle Sensor (G85) / Датчик угла поворота рулевого колеса Audi A6 C6 Fix with VCDS
Ғылым және технология
How fix Audi A6 C6 3.0TDI 165KW 2005 year
00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation
VCDS
Датчик угла поворота рулевого колеса как правильно адаптировать Audi A6 C6 3.0TDI 165KW 2005 year
Пікірлер: 79
Спасибо тебе,добрый человек👍👍👍
Дякую, Вам. Гарна робота.
Great work . Very clear information . Thanks for this 👍🙏
@ZDarjus
3 жыл бұрын
you are welcome :)
Greetings from the USA! Thank you for the video, very helpful!
Спасибо , получилось!!!
Man you have saved me! I accidentally wanted to code the abs module but wrote it wrong and i did not take a photo. Searching and searching i watched your video and tried your software code and guess what? it worked!!! thank you very much
@ZDarjus
5 жыл бұрын
Suhejb Qazimi you are welcome :)
Спасибо за информацию 💪💪💪
Fantastic, thank you so much
Thx mate, a big help for me and nice music as well.
Thank you. It's worked perfect for me 👍
Thank you bro !!! You save my life !!!
@guiredivo
4 жыл бұрын
Post
TOP video BEST on KZread BIG THANKS :)
Больше спасибо, помогло
@ZDarjus
6 жыл бұрын
andrei marin pazalusta
Thank you very much!
Мужик! Огромное тебе спасибо! У меня все получилось! Если бы не это видео, у меня уже руки опустились...
@ZDarjus
8 ай бұрын
Пожалуйста
I got you thanks for this video
Thanks............and Well done
very very good...than; you
Thank you
Hallo, thank you for the video ...
very good tutorial tnx :D
@ZDarjus
6 жыл бұрын
you are welcome :)
Nice 👍👍👍👍👍👍
Top... ajudou mt
👌👍
Dziękuje. Gracias. Thank you
@ZDarjus
4 жыл бұрын
Tomasz Żuk Prosze :)
Thank you😮 work in🎉
Mnezo sa iti dea sanatate ca numa nu am reusit. 👍😂
💪👏
소중한 정보에 감사드립니다.
@ZDarjus
3 жыл бұрын
Glad to help you :)
What if i centerd the steering wheel but it is not 0° on vagcom? thas my problem...
So I got to hook my scanner to a laptop for this?
Is the security code the same for Audi A3 8p
Hi, it didn't work for me unfortunately. I did everything the same, only that in "Basic settings -04" in the drop-down menu I did not see "Steering Angle sensor G85 alignememt" but "Adjustement of ESP -Sensor Unit (G419). And when I follow all the steps, the error continues. 😔. Thank you
Hi i have a audi a3 2010 the steering rack was replaced and then the yello steering light is on the dash board and the abs light. Will this work. Mabey the steering angle snesor is out. Any help would be good i have the vcds machine. Thanks
@ZDarjus
3 жыл бұрын
First you should check for Fault Codes and if Fault Codes same as mine then yes this will work
@mokhan8255
3 жыл бұрын
Hi thanks for reply. It worked lights gone off thanks for the help.
Hii question i have audi b7 a4 does this work with the lite version?
@ZDarjus
3 жыл бұрын
Hi cant say because dont have lite version if you have try if this version have same functions
вопрос. С Audi a3 пройдёт это? точно такая же ошибка с таким же номером.
@ZDarjus
4 жыл бұрын
Alexandro juk должно пройти таким же способам
Please help me , my audi a4 B8 2011 was replaced steering box there i turned on this step light vcds dir has to calibrate the steering angle but it does not work already tried everything and it is also licked system function test
@ZDarjus
3 жыл бұрын
If you replaced all stearing box it not help you need adaptation first it can be done with other program like FVDI Abrites or Audi dealer
Will this work for audi a4 b8 with same problem ESP off when turning?
@ZDarjus
2 жыл бұрын
Yes shure
Hi, when I'm trying to access ABS module with code 40168 I see an error "Access Denied", then I tried to find and enter other codes, and anyway I see another error "37 Required time didn't pass" Abs module MK60EC1. Any solutions or ideas?
@ZDarjus
4 жыл бұрын
Hi maybe vcds cable main chip do not support because china copy i knew have 2 or 3 different main chips, and some cable do not suport all blocks to open
when I get to the step with reading the sensor g85 at degrees it shows me 0 in any position is it because of the sensor not reading
@ZDarjus
4 жыл бұрын
Razvan Ionut yes probably flex sensor broken faulty
@miricaalexandru5432
2 жыл бұрын
Cum ai rezolvat problema?și la mine e la fel
Would this work on a 2009 A4 Avant? B8/8.5
@ZDarjus
2 жыл бұрын
Hi yes sure but if same fault code
HELPPPPP !!!!!! Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi a6 c6. Anyone?
@ZDarjus
4 жыл бұрын
Dailius Abezgaus you steering wheel flex cable maybe broken
Why did the steering angle go bad?
@ZDarjus
6 жыл бұрын
Enzo herrera because i removed all steering wheel to resolder releys for ignition where problem is but in this case master who removed steerring wheel turn wheel too much in one side and broke steering angle
will this work on Audi a5
@ZDarjus
2 жыл бұрын
Yes it will work on Audi A5
Hello guys, anyone can help me, my car showed code 00778 after replacing clock slip squib ring and stating that steering angle sensor defective and no or incorrect basic setting/ adaptation? and showed yellow steering light.
@ZDarjus
4 жыл бұрын
Nondalelo Lone try to drive 50m and turn wheel to left after that turn wheel right and then try, maybe faulty angle sensor replaced if used
@ZDarjus
4 жыл бұрын
Nondalelo Lone or maybe you do not correctly set angle sensor
Yes i go to channel 05 and my steering angle always at 0 degree. And when i turn wheel, its doesnt change the value. I tried to change all sensors, but its still no comunication.... Audi A3 2006 model
@Borosescu
4 жыл бұрын
I have exactly same issue. Can someone who knows tell us what to do?
PLS help me, i do what you do and now my steering wheel îs very hard
@ZDarjus
2 жыл бұрын
its not possible carefully check video and make one more time
@miricaalexandru5432
2 жыл бұрын
@@ZDarjus i do 7 times, ITS posibile to mess something up? To destroy something when i do this steps? I Forgot to mention i have ESP light on and i think 1 ESP rear right bad
@ZDarjus
2 жыл бұрын
@@miricaalexandru5432 If you make diagnostic and have same fault codes it should help, if you see ESP light only and make this you don't know what you are doing. Because i think you don't know what is ESP
@miricaalexandru5432
2 жыл бұрын
@@ZDarjus no, i have same fault +esp light on
@ZDarjus
2 жыл бұрын
@@miricaalexandru5432 what do you mean 1 ESP rear right bad ?