Iam replacing my interior soon thank you for the information I'll be ordering from you

one of the very Best instructional videos that I've watched! Made my installation so much easier. And reinforced my decision to buy from The Seat Shop. Thank You!!

Spot on tutorial. Was able to replace foam and cover on 2002 Chevy Suburban with manual lumbar thanks to your great video. Cheers!

@TheSeatShop

4 жыл бұрын

Glad we could help! If at all possible please send us some before and after pictures we love making our covers but love seeing them installed even more. If you do have some please send them to our Sales@theseatshop.com email

Very helpful. Just finished. An extra pair of hands would have helped. Didn't remove seat, ,just the bottom. THANK YOU !!!

Thanks for the video! ! This was so helpful!

Great job guys, very informative..

Excellent presentation for a quality product

Great video man, thank you! Was thinking about replacing the cushion, heater grid and maybe the cover on my '02 YukonXL. Those 308,000 miles have flattened that cushion like a pancake. The leather is actually in great shape. Loose since the cushion is almost gone though. Thanks again!

Awsome job on the video ....it really helped alot thx a ton, Greg

@TheSeatShop

8 жыл бұрын

+Kentucky65 Thank you!

Thanks for the tips!

awesome video guys! thank you!!

Awesome example!!!!!

Great video. Helped alot getting mine replaced!!!

@TheSeatShop

6 жыл бұрын

Thank you for reaching out to us, let us know if we can help you with anything else

Awesome video

Perfect! Thank you.

lost two orings two clips finally got the third clip and zip tied it

you got a sale coming soon!!! love my 2002 Yukon....just wish you guys made vinyl replacements for astro vans.

@TheSeatShop

5 жыл бұрын

Hopefully we will have this for you in the near future! thanks for the comment

(con't) I had a manual lumbar support adjuster - I could not get the cable disconnected from the bottom of the seat. The result was I could not separate the bottom from the seat back. I had to put the new covers on the seat and back, while keeping them close enough to each other so as not to tweak the cable. All in all it took me 4 hours. 3 hours to R&R the seat from the tahoe, 1 hour to swap the covers. I think a video showing seat removal would be useful. Thanks for a great product.

Can you tell me if all of the seat frames for the 00-07 silverado/Sierra seats have the provisions for arm rests. I have o2 seats without and want to add armrests. Was thinking that I just need the cushions and the actual plate that holds the armrest pin are under my cushions but not used.

Great video guys. Was able to replace both cover and a new foam due to original being garbage. I hope I wasn't supposed to pull entire seat out like you guys did in video? I was able to accomplish with just bottom seat pulled out w/o the bottom part coming out. So the seat just pulled to redo seat cover.

@TheSeatShop

6 жыл бұрын

Hey, great to hear your install went well! We usually recommend pulling the entire seat to make the install easier, but whatever works best for you!

@lamarryoung

5 жыл бұрын

Were there any specialty tools needed to remove bottom only and how long did it take?

It REALLY would have helped if you had said "use the motor to adjust your seat to the highest position and the middle front-to-back" BEFORE the 3-minute mark. I had to go drag the removed seat back to the truck and realign it and pull it out again. Maybe you can add this text the very beginning of the video as an overlay/popup.

@TheSeatShop

7 жыл бұрын

Gregg good feedback. We made that video 5 years ago and should probably shoot another one. Appreciate you sir!

@crossroads427

4 жыл бұрын

So are you shooting another

@randallchartier

3 жыл бұрын

@@TheSeatShop and yet after 5 years this video stands heads and shoulders above all the rest for all the right reasons - simply every single thing you could possibly need to know about how to take these seats apart and then put them back together again. The video and audio quality are both excellent and not a minute wasted on kitsch. Anybody that's smart is going to take the whole seat out of the vehicle and take it inside and set it on a workbench to complete the change over of the cover and foam. Just where else could you possibly get a video that's as helpful as this one?

@billydamnit

2 жыл бұрын

No shit. I wish I had seen your comment. 😔

@justintimefilms7309

6 ай бұрын

That's your fault you impatient little cry baby who can't watch the while video before starting

I just installed your seat driver cover (2002 Chevy Tahoe). The hardest part for me was getting the seat out of the car. Driver side right front screw is hidden under a plastic cover, and the rear ones are only accessible with the seat in a particular position - controlled by the electronic position adjuster. So it must be removed before unhooking all the wires.

@michaelmeo1136

5 жыл бұрын

My 2001 Silverado cloth cover is in good shape but the foam is breaking down. Does the original cloth gets destroyed when pulling it apart?

Hey I've replaced the captain seat covers on my tahoe now can the rear bench seat covers be replaced??

What about removing the seat belt before you removed the seat

I am told by my local shop that the seat heaters can be very fragile and that caution should be used not to break the wires that are in the seat heater. Is this something to be mindful of? Which sockets need to be the deep sockets? 11 and 15 mm?

Do y’all make seat covers for Nissans?

Can you please do a video on a 1990 cadillac brougham d'elegance removal of seat and seat covers

@TheSeatShop

2 жыл бұрын

Hi Eric! Unfortunately we do not have products for this vehicle just yet which is why we do not have a video made. Once we have the seat covers available, we will be able to post a video of this process! Let us know if we can help you out with anything else.

So. What about when the seat controls stop working, and the seat is stuck in the full forward position....?

@TheSeatShop

4 жыл бұрын

It could be the mechanism itself but you may want to take your vehicle in to get looked at, to confirm.

Will you guys do installation for me?

@TheSeatShop

3 жыл бұрын

HI there, we typically don't do installations (we're more of the manufacturer itself) but we work with a bunch of shops that can help with that. Feel free to click the link below and enter your ZIP to find shops that can help. www.theseatshop.com/resources/install-locator/

@le8013

3 жыл бұрын

Thank you. Do I have to buy the part from you?

@TheSeatShop

3 жыл бұрын

@@le8013 We would be happy to help you out but never feel forced to do so. However, you can be assured that you will be getting high quality products purchasing from us, let us know if you have any questions about our company, products, etc.

Toons Nasty

get a new drill for crying out loud